Fixes for re-running reset scripts

.gitignore

@@ -26,6 +26,7 @@ dist-ssr
 dashboard/build/**
 dashboard-server/frontend/build/**
 **/build/**
+.fuse_hidden**
 ._*
 
 # Build directories

docs/calculate-issues.md

@@ -0,0 +1,185 @@
+1. **Missing Updates for Reorder Point and Safety Stock** [RESOLVED - product-metrics.js]
+- **Problem:** In the **product_metrics** table (used by the inventory health view), the fields **reorder_point** and **safety_stock** are never updated in the product metrics calculations. Although a helper function (`calculateReorderQuantities`) exists and computes these values, the update query in the `calculateProductMetrics` function does not assign any values to these columns.
+- **Effect:** The inventory health view relies on these fields (using COALESCE to default them to 0), which means that stock might never be classified as "Reorder" or "Healthy" based on the proper reorder point or safety stock calculations.
+- **Example:** Even if a product's base metrics would require a reorder (for example, if its days of inventory are low), the view always shows a value of 0 for reorder_point and safety_stock.
+- **Fix:** Update the product metrics query (or add a subsequent update) so that **pm.reorder_point** and **pm.safety_stock** are calculated (for instance, by integrating the logic from `calculateReorderQuantities`) and stored in the table.
+
+2. **Overwritten Module Exports When Combining Scripts** [RESOLVED - calculate-metrics.js]
+- **Problem:** The code provided shows two distinct exports. The main metrics calculation module exports `calculateMetrics` (along with cancel and getProgress helpers), but later in the same concatenated file the module exports are overwritten.
+- **Effect:** If these two code sections end up in a single module file, the export for the main calculation will be lost. This would break any code that calls the overall metrics calculation.
+- **Example:** An external caller expecting to run `calculateMetrics` would instead receive the `calculateProductMetrics` function.
+- **Fix:** Make sure each script resides in its own module file. Verify that the module boundaries and exports are not accidentally merged or overwritten when deployed.
+
+3. **Potential Formula Issue in EOQ Calculation (Reorder Qty)** [RESOLVED - product-metrics.js]
+- **Problem:** The helper function `calculateReorderQuantities` uses an EOQ formula with a holding cost expressed as a percentage (0.25) rather than a per‐unit cost.
+- **Effect:** If the intent was to use the traditional EOQ formula (which expects a holding cost per unit rather than a percentage), this could lead to an incorrect reorder quantity.
+- **Example:** For a given annual demand and fixed order cost, the computed reorder quantity might be higher or lower than expected.
+- **Fix:** Double-check the EOQ formula. If the intention is to compute based on a percentage, then document that clearly; otherwise, adjust the formula to use the proper holding cost value.
+
+4. **Potential Overlap or Redundancy in GMROI Calculation** [RESOLVED - time-aggregates.js]
+- **Problem:** In the time aggregates function, GMROI is calculated in two steps. The initial INSERT query computes GMROI as
+
+	`CASE WHEN s.inventory_value > 0 THEN (s.total_revenue - s.total_cost) / s.inventory_value ELSE 0 END`
+
+	and then a subsequent UPDATE query recalculates it as an annualized value using gross profit and active days.
+
+
+- **Effect:** Overwriting a computed value may be intentional to refine the metric, but if not coordinated it can cause confusion or unexpected output in the `product_time_aggregates` table.
+- **Example:** A product's GMROI might first appear as a simple ratio but then be updated to a scaled value based on the number of active days, which could lead to inconsistent reporting if not documented.
+- **Fix:** Consolidated the GMROI calculation into a single step in the initial INSERT query, properly handling annualization and NULL values.
+
+5. **Handling of Products Without Orders or Purchase Data** [RESOLVED - time-aggregates.js]
+- **Problem:** In the INSERT query of the time aggregates function, the UNION covers two cases: one for products with order data (from `monthly_sales`) and one for products that have entries in `monthly_stock` but no matching order data.
+- **Effect:** If a product has neither orders nor purchase orders, it won't get an entry in `product_time_aggregates`. Depending on business rules, this might be acceptable or might mean missing data.
+- **Example:** A product that's new or rarely ordered might not appear in the time aggregates view, potentially affecting downstream calculations.
+- **Fix:** Added an `all_products` CTE and modified the JOIN structure to ensure every product gets an entry with appropriate default values, even if it has no orders or purchase orders.
+
+6. **Redundant Recalculation of Vendor Metrics**
+- **Problem:** Similar concepts from prior scripts where cumulative metrics (like **total_revenue** and **total_cost**) are calculated in multiple query steps without necessary validation or optimization. In the vendor metrics script, calculations for total revenue and margin are performed within a `WITH` clause, which is then used in other parts of the process, making it more complex than needed.
+- **Effect:** There's unnecessary duplication in querying the same data multiple times across subqueries. It could result in decreased performance and may even lead to excess computation if the subqueries are not optimized or correctly indexed.
+- **Example:** Vendor sales and vendor purchase orders (PO) metrics are calculated in separate `WITH` clauses, leading to repeated calculations.
+- **Fix:** Synthesize the required metrics into fewer queries or reuse the results within the `WITH` clause itself. Avoid redundant calculations of **revenue** and **cost** unless truly necessary.
+
+7. **Handling Products Without Orders or Purchase Orders**
+- **Problem:** In your `calculateVendorMetrics` script, the initial insert for vendor sales doesn't fully address the products that might not have matching orders or purchase orders. If a vendor has products without any sales within the last 12 months, the results may not be fully accurate unless handled explicitly.
+- **Effect:** If no orders exist for a product associated with a particular vendor, that product will not contribute to the vendor's metrics, potentially omitting important data when calculating **total_orders** or **total_revenue**.
+- **Example:** The scripted statistics fill gaps, but products with no recent purchase or sales orders might not be counted accurately.
+- **Fix:** Include logic to handle scenarios where these products still need to be part of the vendor calculation. Use a `LEFT JOIN` wherever possible to account for cases without sales or purchase orders.
+
+8. **Redundant `ON DUPLICATE KEY UPDATE`**
+- **Problem:** Multiple queries in the `calculateVendorMetrics` script use `ON DUPLICATE KEY UPDATE` clauses to handle repeated metrics updates. This is useful for ensuring the most up-to-date calculations but can cause inconsistencies if multiple calculations happen for the same product or vendor simultaneously.
+- **Effect:** This approach can lead to an inaccurate update of brand-specific data when insertion and update overlap. Each time you add a new batch, an existing entry could be overwritten if not handled correctly.
+- **Example:** Vendor country, category, or sales-related metrics could unintentionally update during processing.
+- **Fix:** Match on current status more robustly in case of existing rows to avoid unnecessary updates. Ensure that the key used for `ON DUPLICATE KEY` aligns with any foreign key relationships that might indicate an already processed entry.
+
+9. **SQL Query Performance with Multiple Nested `WITH` Clauses**
+- **Problem:** Heavily nested queries (especially **WITH** clauses) may lead to slow performance depending on the size of the dataset.
+- **Effect:** Computational burden could be high when the database is large, e.g., querying **purchase orders**, **vendor sales**, and **product info** simultaneously. Even with proper indexes, the deployment might struggle in production environments.
+- **Example:** Multiple `WITH` clauses in the vendor and brand metrics calculation scripts might work fine in small datasets but degrade performance in production.
+- **Fix:** Combine some subqueries and reduce the layer of computations needed for calculating final metrics. Test performance on a production-sized dataset to see how nested queries are handled.
+
+10. **Missing Updates for Reorder Metrics (Vendor/Brand)**
+- **Previously Identified Issue:** Inconsistent updates for **reorder_point** and **safety_stock** across earlier scripts.
+- **Current Impact on This Script:** The vendor and brand metrics do not have explicit updates for reorder point or safety stock, which are essential for inventory evaluation.
+- **Effect:** The correct thresholds and reorder logic for vendor product inventory aren't fully accounted for in these scripts.
+- **Fix:** Integrate relevant logic to update **reorder_point** or **safety_stock** within the vendor and brand metrics calculations. Ensure that it's consistently computed and stored.
+
+11. **Data Integrity and Consistency** 
+
+**w**hen tracking sales growth or performance
+
+
+- **Problem:** Brand metrics include a sales growth clause where negative results can sometimes be skewed severely if period data varies considerably.
+- **Effect:** If period boundaries are incorrect or records are missing, this can create drastic growth rate calculations.
+- **Example:** If the "previous" period has no sales but "current" has a substantial increase, the growth rate will show as **100%**.
+- **Fix:** Implement checks that ensure both periods are valid and that the system calculates growth accurately, avoiding growth rates based solely on potential outliers. Replace consistent gaps with a no-growth rate or a meaningful zero.
+
+12. **Exclusion of Vendors With No Sales**
+
+	The vendor metrics query is driven by the `vendor_sales` CTE, which aggregates data only for vendors that have orders in the past 12 months.
+
+
+	- **Impact:** Vendors that have purchase activity (or simply exist in vendor_details) but no recent sales won't show up in vendor_metrics. This could cause the frontend to miss metrics for vendors that might still be important.
+	- **Fix:** Consider adding a UNION or changing the driving set so that all vendors (for example, from vendor_details) are included—even if they have zero sales.
+13. **Identical Formulas for On-Time Delivery and Order Fill Rates**
+
+	Both metrics are calculated as `(received_orders / total_orders) * 100`.
+
+
+	- **Impact:** If the business expects these to be distinct (for example, one might factor in on-time receipt versus mere receipt), then showing identical values on the frontend could be misleading.
+	- **Fix:** Verify and adjust the formulas if on-time delivery and order fill rates should be computed differently.
+14. **Handling Nulls and Defaults in Aggregations**
+
+	The query uses COALESCE in most places, but be sure that every aggregated value (like average lead time) correctly defaults when no data is present.
+
+
+	- **Impact:** Incorrect defaults might cause odd or missing numbers on the production interface.
+	- **Fix:** Double-check that all numeric aggregates reliably default to 0 where needed.
+
+15. **Inconsistent Stock Filtering Conditions**
+
+	In the main brand metrics query the CTE filters products with the condition
+
+	`p.stock_quantity <= 5000 AND p.stock_quantity >= 0`
+
+	whereas in the brand time-based metrics query the condition is only `p.stock_quantity <= 5000`.
+
+
+	- **Impact:** This discrepancy may lead to inconsistent numbers (for example, if any products have negative stock, which might be due to data issues) between overall brand metrics and time-based metrics on the frontend.
+	- **Fix:** Standardize the filtering criteria so that both queries treat out-of-range stock values in the same way.
+16. **Growth Rate Calculation Periods**
+
+	The growth rate is computed by comparing revenue from the last 3 months ("current") against a period from 15–12 months ago ("previous").
+
+
+	- **Impact:** This narrow window may not reflect typical year-over-year performance and could lead to volatile or unexpected growth percentages on the frontend.
+	- **Fix:** Revisit the business logic for growth—if a longer or different comparison period is preferred, adjust the date intervals accordingly.
+17. **Potential NULLs in Aggregated Time-Based Metrics**
+
+	In the brand time-based metrics query, aggregate expressions such as `SUM(o.quantity * o.price)` aren't wrapped with COALESCE.
+
+
+	- **Impact:** If there are no orders for a given brand/month, these sums might return NULL rather than 0, which could propagate into the frontend display.
+	- **Fix:** Wrap such aggregates in COALESCE (e.g. `COALESCE(SUM(o.quantity * o.price), 0)`) to ensure a default numeric value.
+
+18. **Grouping by Category Status in Base Metrics Insert**
+	- **Problem:** The INSERT for base category metrics groups by both `c.cat_id` and `c.status` even though the table's primary key is just `category_id`.
+	- **Effect:** If a category's status changes over time, the grouping may produce unexpected updates (or even multiple groups before the duplicate key update kicks in), possibly causing the wrong status or aggregated figures to be stored.
+	- **Example:** A category that toggles between "active" and "inactive" might have its metrics calculated differently on different runs.
+	- **Fix:** Ensure that the grouping keys match the primary key (or that the status update logic is exactly as intended) so that a single row per category is maintained.
+19. **Potential Null Handling in Margin Calculations**
+	- **Problem:** In the query for category time metrics, the calculation of average margin uses expressions such as `SUM(o.quantity * (o.price - GREATEST(p.cost_price, 0)))` without using `COALESCE` on `p.cost_price`.
+	- **Effect:** If any product's `cost_price` is `NULL`, then `GREATEST(p.cost_price, 0)` returns `NULL` and the resulting sum (and thus the margin) could become `NULL` rather than defaulting to 0. This might lead to missing or misleading margin figures on the frontend.
+	- **Example:** A product with a missing cost price would make the entire margin expression evaluate to `NULL` even when sales exist.
+	- **Fix:** Replace `GREATEST(p.cost_price, 0)` with `GREATEST(COALESCE(p.cost_price, 0), 0)` (or simply use `COALESCE(p.cost_price, 0)`) to ensure that missing values are handled.
+20. **Data Coverage in Growth Rate Calculation**
+	- **Problem:** The growth rate update depends on multiple CTEs (current period, previous period, and trend analysis) that require a minimum amount of data (for instance, `HAVING COUNT(*) >= 6` in the trend_stats CTE).
+	- **Effect:** Categories with insufficient historical data will fall into the "ELSE" branch (or may even be skipped if no revenue is present), which might result in a growth rate of 0.0 or an unexpected value.
+	- **Example:** A newly created category that has only two months of data won't have trend analysis, so its growth rate will be calculated solely by the simple difference, which might not reflect true performance.
+	- **Fix:** Confirm that this fallback behavior is acceptable for production; if not, adjust the logic so that every category receives a consistent growth rate even with sparse data.
+21. **Omission of Forecasts for Zero–Sales Categories**
+	- **Observation:** The category–sales metrics query uses a `HAVING AVG(cs.daily_quantity) > 0` clause.
+	- **Effect:** Categories without any average daily sales will not receive a forecast record in `category_sales_metrics`. If the frontend expects a row (even with zeros) for every category, this will lead to missing data.
+	- **Fix:** Verify that it's acceptable for categories with no sales to have no forecast entry. If not, adjust the query so that a default forecast (with zeros) is inserted.
+
+22. **Randomness in Category-Level Forecast Revenue Calculation**
+	- **Problem:** In the category-level forecasts query, the forecast revenue is multiplied by a factor of `(0.95 + (RAND() * 0.1))`.
+	- **Effect:** This introduces randomness into the forecast figures so that repeated runs could yield slightly different values. If deterministic forecasts are expected on the production frontend, this could lead to inconsistent displays.
+	- **Example:** The same category might show a 5% higher forecast on one run and 3% on another because of the random multiplier.
+	- **Fix:** Confirm that this randomness is intentional for your forecasting model; if forecasts are meant to be reproducible, remove or replace the `RAND()` factor with a fixed multiplier.
+23. **Multi-Statement Cleanup of Temporary Tables**
+	- **Problem:** The cleanup query drops multiple temporary tables in one call (separated by semicolons).
+	- **Effect:** If your Node.js MySQL driver isn't configured to allow multi-statement execution, this query may fail, leaving temporary tables behind. Leftover temporary tables might eventually cause conflicts or resource issues.
+	- **Example:** Running the cleanup query could produce an error like "multi-statement queries not enabled," preventing proper cleanup.
+	- **Fix:** Either configure your database connection to allow multi-statements or issue separate queries for each temporary table drop to ensure that the cleanup runs successfully.
+24. **Handling Products with No Sales Data**
+	- **Problem:** In the product-level forecast calculation, the CTE `daily_stats` includes a `HAVING AVG(ds.daily_quantity) > 0` clause.
+	- **Effect:** Products that have no sales (or a zero average daily quantity) will be excluded from the forecasts. This means the frontend won't show forecasts for non–selling products, which might be acceptable but could also be a completeness issue.
+	- **Example:** A product that has never sold will not appear in the `sales_forecasts` table.
+	- **Fix:** Confirm that it is intended for forecasts to be generated only for products with some sales activity. If forecasts are required for all products, adjust the query to insert default forecast records for products with zero sales.
+25. **Complexity of the Forecast Formula Involving the Seasonality Factor**
+- **Issue:**
+
+	The sales forecast calculations incorporate an adjustment factor using `COALESCE(sf.seasonality_factor, 0)` to modify forecast units and revenue. This means that if the seasonality data is missing (or not populated), the factor defaults to 0.
+
+
+- **Potential Problem:**
+
+	A default value of 0 will drastically alter the forecast calculations—often leading to a forecast of 0 or an overly dampened forecast—when in reality the intended behavior might be to use a neutral multiplier (typically 1.0). This could result in forecasts that are not reflective of the actual seasonal impact, thereby skewing the figures that reach the frontend.
+
+
+- **Fix:**
+
+	Review your data source for seasonality (the `sales_seasonality` table) and ensure it's consistently populated. Alternatively, if missing seasonality data is possible, consider using a more neutral default (such as 1.0) in your COALESCE. This change would prevent the forecast formulas from over-simplifying (or even nullifying) the forecast output due to missing seasonality factors.
+
+
+26. **Group By with Seasonality Factor Variability**
+	- **Observation:** In the forecast insertion query, the GROUP BY clause includes `sf.seasonality_factor` along with other fields.
+	- **Effect:** If the seasonality factor differs (or is `NULL` versus a value) for different forecast dates, this might result in multiple rows for the same product and forecast date. However, the `ON DUPLICATE KEY UPDATE` clause will merge them—but only if the primary key (pid, forecast_date) is truly unique.
+	- **Fix:** Verify that the grouping produces exactly one row per product per forecast date. If there's potential for multiple rows due to seasonality variability, consider applying a COALESCE or an aggregation on the seasonality factor so that it does not affect grouping.
+
+27. **Memory Management for Temporary Tables** [RESOLVED - calculate-metrics.js]
+- **Problem:** In metrics calculations, temporary tables aren't always properly cleaned up if the process fails between creation and the DROP statement.
+- **Effect:** If a process fails after creating temporary tables but before dropping them, these tables remain in memory until the connection is closed. In a production environment with multiple calculation runs, this could lead to memory leaks or table name conflicts.
+- **Example:** The `temp_revenue_ranks` table creation in ABC classification could remain if the process fails before reaching the DROP statement.
+- **Fix:** Implement proper cleanup in a finally block or use transaction management that ensures temporary tables are always cleaned up, even in failure scenarios.

inventory-server/db/config-schema.sql

@@ -1,150 +1,154 @@
 -- Configuration tables schema
 
 -- Stock threshold configurations
-CREATE TABLE IF NOT EXISTS stock_thresholds (
-    id INT NOT NULL,
+CREATE TABLE stock_thresholds (
+    id INTEGER NOT NULL,
     category_id BIGINT,  -- NULL means default/global threshold
     vendor VARCHAR(100), -- NULL means applies to all vendors
-    critical_days INT NOT NULL DEFAULT 7,
-    reorder_days INT NOT NULL DEFAULT 14,
-    overstock_days INT NOT NULL DEFAULT 90,
-    low_stock_threshold INT NOT NULL DEFAULT 5,
-    min_reorder_quantity INT NOT NULL DEFAULT 1,
+    critical_days INTEGER NOT NULL DEFAULT 7,
+    reorder_days INTEGER NOT NULL DEFAULT 14,
+    overstock_days INTEGER NOT NULL DEFAULT 90,
+    low_stock_threshold INTEGER NOT NULL DEFAULT 5,
+    min_reorder_quantity INTEGER NOT NULL DEFAULT 1,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (id),
     FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    UNIQUE KEY unique_category_vendor (category_id, vendor),
-    INDEX idx_st_metrics (category_id, vendor)
+    UNIQUE (category_id, vendor)
 );
 
+CREATE INDEX idx_st_metrics ON stock_thresholds(category_id, vendor);
+
 -- Lead time threshold configurations
-CREATE TABLE IF NOT EXISTS lead_time_thresholds (
-    id INT NOT NULL,
+CREATE TABLE lead_time_thresholds (
+    id INTEGER NOT NULL,
     category_id BIGINT,  -- NULL means default/global threshold
     vendor VARCHAR(100), -- NULL means applies to all vendors
-    target_days INT NOT NULL DEFAULT 14,
-    warning_days INT NOT NULL DEFAULT 21,
-    critical_days INT NOT NULL DEFAULT 30,
+    target_days INTEGER NOT NULL DEFAULT 14,
+    warning_days INTEGER NOT NULL DEFAULT 21,
+    critical_days INTEGER NOT NULL DEFAULT 30,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (id),
     FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    UNIQUE KEY unique_category_vendor (category_id, vendor)
+    UNIQUE (category_id, vendor)
 );
 
 -- Sales velocity window configurations
-CREATE TABLE IF NOT EXISTS sales_velocity_config (
-    id INT NOT NULL,
+CREATE TABLE sales_velocity_config (
+    id INTEGER NOT NULL,
     category_id BIGINT,  -- NULL means default/global threshold
     vendor VARCHAR(100), -- NULL means applies to all vendors
-    daily_window_days INT NOT NULL DEFAULT 30,
-    weekly_window_days INT NOT NULL DEFAULT 7,
-    monthly_window_days INT NOT NULL DEFAULT 90,
+    daily_window_days INTEGER NOT NULL DEFAULT 30,
+    weekly_window_days INTEGER NOT NULL DEFAULT 7,
+    monthly_window_days INTEGER NOT NULL DEFAULT 90,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (id),
     FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    UNIQUE KEY unique_category_vendor (category_id, vendor),
-    INDEX idx_sv_metrics (category_id, vendor)
+    UNIQUE (category_id, vendor)
 );
 
+CREATE INDEX idx_sv_metrics ON sales_velocity_config(category_id, vendor);
+
 -- ABC Classification configurations
-CREATE TABLE IF NOT EXISTS abc_classification_config (
-    id INT NOT NULL PRIMARY KEY,
+CREATE TABLE abc_classification_config (
+    id INTEGER NOT NULL PRIMARY KEY,
     a_threshold DECIMAL(5,2) NOT NULL DEFAULT 20.0,
     b_threshold DECIMAL(5,2) NOT NULL DEFAULT 50.0,
-    classification_period_days INT NOT NULL DEFAULT 90,
+    classification_period_days INTEGER NOT NULL DEFAULT 90,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP
 );
 
 -- Safety stock configurations
-CREATE TABLE IF NOT EXISTS safety_stock_config (
-    id INT NOT NULL,
+CREATE TABLE safety_stock_config (
+    id INTEGER NOT NULL,
     category_id BIGINT,  -- NULL means default/global threshold
     vendor VARCHAR(100), -- NULL means applies to all vendors
-    coverage_days INT NOT NULL DEFAULT 14,
+    coverage_days INTEGER NOT NULL DEFAULT 14,
     service_level DECIMAL(5,2) NOT NULL DEFAULT 95.0,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (id),
     FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    UNIQUE KEY unique_category_vendor (category_id, vendor),
-    INDEX idx_ss_metrics (category_id, vendor)
+    UNIQUE (category_id, vendor)
 );
 
+CREATE INDEX idx_ss_metrics ON safety_stock_config(category_id, vendor);
+
 -- Turnover rate configurations
-CREATE TABLE IF NOT EXISTS turnover_config (
-    id INT NOT NULL,
+CREATE TABLE turnover_config (
+    id INTEGER NOT NULL,
     category_id BIGINT,  -- NULL means default/global threshold
     vendor VARCHAR(100), -- NULL means applies to all vendors
-    calculation_period_days INT NOT NULL DEFAULT 30,
+    calculation_period_days INTEGER NOT NULL DEFAULT 30,
     target_rate DECIMAL(10,2) NOT NULL DEFAULT 1.0,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (id),
     FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    UNIQUE KEY unique_category_vendor (category_id, vendor)
+    UNIQUE (category_id, vendor)
 );
 
 -- Create table for sales seasonality factors
-CREATE TABLE IF NOT EXISTS sales_seasonality (
-    month INT NOT NULL,
+CREATE TABLE sales_seasonality (
+    month INTEGER NOT NULL,
     seasonality_factor DECIMAL(5,3) DEFAULT 0,
     last_updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (month),
-    CHECK (month BETWEEN 1 AND 12),
-    CHECK (seasonality_factor BETWEEN -1.0 AND 1.0)
+    CONSTRAINT month_range CHECK (month BETWEEN 1 AND 12),
+    CONSTRAINT seasonality_range CHECK (seasonality_factor BETWEEN -1.0 AND 1.0)
 );
 
--- Insert default global thresholds if not exists
+-- Insert default global thresholds
 INSERT INTO stock_thresholds (id, category_id, vendor, critical_days, reorder_days, overstock_days)
 VALUES (1, NULL, NULL, 7, 14, 90)
-ON DUPLICATE KEY UPDATE
-    critical_days = VALUES(critical_days),
-    reorder_days = VALUES(reorder_days),
-    overstock_days = VALUES(overstock_days);
+ON CONFLICT (id) DO UPDATE SET
+    critical_days = EXCLUDED.critical_days,
+    reorder_days = EXCLUDED.reorder_days,
+    overstock_days = EXCLUDED.overstock_days;
 
 INSERT INTO lead_time_thresholds (id, category_id, vendor, target_days, warning_days, critical_days)
 VALUES (1, NULL, NULL, 14, 21, 30)
-ON DUPLICATE KEY UPDATE
-    target_days = VALUES(target_days),
-    warning_days = VALUES(warning_days),
-    critical_days = VALUES(critical_days);
+ON CONFLICT (id) DO UPDATE SET
+    target_days = EXCLUDED.target_days,
+    warning_days = EXCLUDED.warning_days,
+    critical_days = EXCLUDED.critical_days;
 
 INSERT INTO sales_velocity_config (id, category_id, vendor, daily_window_days, weekly_window_days, monthly_window_days)
 VALUES (1, NULL, NULL, 30, 7, 90)
-ON DUPLICATE KEY UPDATE
-    daily_window_days = VALUES(daily_window_days),
-    weekly_window_days = VALUES(weekly_window_days),
-    monthly_window_days = VALUES(monthly_window_days);
+ON CONFLICT (id) DO UPDATE SET
+    daily_window_days = EXCLUDED.daily_window_days,
+    weekly_window_days = EXCLUDED.weekly_window_days,
+    monthly_window_days = EXCLUDED.monthly_window_days;
 
 INSERT INTO abc_classification_config (id, a_threshold, b_threshold, classification_period_days)
 VALUES (1, 20.0, 50.0, 90)
-ON DUPLICATE KEY UPDATE
-    a_threshold = VALUES(a_threshold),
-    b_threshold = VALUES(b_threshold),
-    classification_period_days = VALUES(classification_period_days);
+ON CONFLICT (id) DO UPDATE SET
+    a_threshold = EXCLUDED.a_threshold,
+    b_threshold = EXCLUDED.b_threshold,
+    classification_period_days = EXCLUDED.classification_period_days;
 
 INSERT INTO safety_stock_config (id, category_id, vendor, coverage_days, service_level)
 VALUES (1, NULL, NULL, 14, 95.0)
-ON DUPLICATE KEY UPDATE
-    coverage_days = VALUES(coverage_days),
-    service_level = VALUES(service_level);
+ON CONFLICT (id) DO UPDATE SET
+    coverage_days = EXCLUDED.coverage_days,
+    service_level = EXCLUDED.service_level;
 
 INSERT INTO turnover_config (id, category_id, vendor, calculation_period_days, target_rate)
 VALUES (1, NULL, NULL, 30, 1.0)
-ON DUPLICATE KEY UPDATE
-    calculation_period_days = VALUES(calculation_period_days),
-    target_rate = VALUES(target_rate);
+ON CONFLICT (id) DO UPDATE SET
+    calculation_period_days = EXCLUDED.calculation_period_days,
+    target_rate = EXCLUDED.target_rate;
 
 -- Insert default seasonality factors (neutral)
 INSERT INTO sales_seasonality (month, seasonality_factor)
 VALUES 
     (1, 0), (2, 0), (3, 0), (4, 0), (5, 0), (6, 0),
     (7, 0), (8, 0), (9, 0), (10, 0), (11, 0), (12, 0)
-ON DUPLICATE KEY UPDATE last_updated = CURRENT_TIMESTAMP;
+ON CONFLICT (month) DO UPDATE SET
+    last_updated = CURRENT_TIMESTAMP;
 
 -- View to show thresholds with category names
 CREATE OR REPLACE VIEW stock_thresholds_view AS
@@ -153,9 +157,9 @@ SELECT
     c.name as category_name,
     CASE 
         WHEN st.category_id IS NULL AND st.vendor IS NULL THEN 'Global Default'
-        WHEN st.category_id IS NULL THEN CONCAT('Vendor: ', st.vendor)
-        WHEN st.vendor IS NULL THEN CONCAT('Category: ', c.name)
-        ELSE CONCAT('Category: ', c.name, ' / Vendor: ', st.vendor)
+        WHEN st.category_id IS NULL THEN 'Vendor: ' || st.vendor
+        WHEN st.vendor IS NULL THEN 'Category: ' || c.name
+        ELSE 'Category: ' || c.name || ' / Vendor: ' || st.vendor
     END as threshold_scope
 FROM 
     stock_thresholds st
@@ -171,26 +175,51 @@ ORDER BY
     c.name,
     st.vendor;
 
+-- History and status tables
+CREATE TABLE IF NOT EXISTS calculate_history (
+    id BIGSERIAL PRIMARY KEY,
+    start_time TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
+    end_time TIMESTAMP NULL,
+    duration_seconds INTEGER,
+    duration_minutes DECIMAL(10,2) GENERATED ALWAYS AS (duration_seconds::decimal / 60.0) STORED,
+    total_products INTEGER DEFAULT 0,
+    total_orders INTEGER DEFAULT 0,
+    total_purchase_orders INTEGER DEFAULT 0,
+    processed_products INTEGER DEFAULT 0,
+    processed_orders INTEGER DEFAULT 0,
+    processed_purchase_orders INTEGER DEFAULT 0,
+    status calculation_status DEFAULT 'running',
+    error_message TEXT,
+    additional_info JSONB
+);
+
+CREATE TABLE IF NOT EXISTS calculate_status (
+    module_name module_name PRIMARY KEY,
+    last_calculation_timestamp TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP
+);
+
 CREATE TABLE IF NOT EXISTS sync_status (
     table_name VARCHAR(50) PRIMARY KEY,
     last_sync_timestamp TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
-    last_sync_id BIGINT,
-    INDEX idx_last_sync (last_sync_timestamp)
+    last_sync_id BIGINT
 );
 
 CREATE TABLE IF NOT EXISTS import_history (
-    id BIGINT AUTO_INCREMENT PRIMARY KEY,
+    id BIGSERIAL PRIMARY KEY,
     table_name VARCHAR(50) NOT NULL,
     start_time TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     end_time TIMESTAMP NULL,
-    duration_seconds INT,
-    duration_minutes DECIMAL(10,2) GENERATED ALWAYS AS (duration_seconds / 60.0) STORED,
-    records_added INT DEFAULT 0,
-    records_updated INT DEFAULT 0,
+    duration_seconds INTEGER,
+    duration_minutes DECIMAL(10,2) GENERATED ALWAYS AS (duration_seconds::decimal / 60.0) STORED,
+    records_added INTEGER DEFAULT 0,
+    records_updated INTEGER DEFAULT 0,
     is_incremental BOOLEAN DEFAULT FALSE,
-    status ENUM('running', 'completed', 'failed', 'cancelled') DEFAULT 'running',
+    status calculation_status DEFAULT 'running',
     error_message TEXT,
-    additional_info JSON,
-    INDEX idx_table_time (table_name, start_time),
-    INDEX idx_status (status)
-); 
+    additional_info JSONB
+);
+
+-- Create all indexes after tables are fully created
+CREATE INDEX IF NOT EXISTS idx_last_calc ON calculate_status(last_calculation_timestamp);
+CREATE INDEX IF NOT EXISTS idx_last_sync ON sync_status(last_sync_timestamp);
+CREATE INDEX IF NOT EXISTS idx_table_time ON import_history(table_name, start_time); 

inventory-server/db/metrics-schema.sql

@@ -1,8 +1,8 @@
 -- Disable foreign key checks
-SET FOREIGN_KEY_CHECKS = 0;
+SET session_replication_role = 'replica';
 
 -- Temporary tables for batch metrics processing
-CREATE TABLE IF NOT EXISTS temp_sales_metrics (
+CREATE TABLE temp_sales_metrics (
     pid BIGINT NOT NULL,
     daily_sales_avg DECIMAL(10,3),
     weekly_sales_avg DECIMAL(10,3),
@@ -14,9 +14,9 @@ CREATE TABLE IF NOT EXISTS temp_sales_metrics (
     PRIMARY KEY (pid)
 );
 
-CREATE TABLE IF NOT EXISTS temp_purchase_metrics (
+CREATE TABLE temp_purchase_metrics (
     pid BIGINT NOT NULL,
-    avg_lead_time_days INT,
+    avg_lead_time_days INTEGER,
     last_purchase_date DATE,
     first_received_date DATE,
     last_received_date DATE,
@@ -24,7 +24,7 @@ CREATE TABLE IF NOT EXISTS temp_purchase_metrics (
 );
 
 -- New table for product metrics
-CREATE TABLE IF NOT EXISTS product_metrics (
+CREATE TABLE product_metrics (
     pid BIGINT NOT NULL,
     last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     -- Sales velocity metrics
@@ -32,16 +32,16 @@ CREATE TABLE IF NOT EXISTS product_metrics (
     weekly_sales_avg DECIMAL(10,3),
     monthly_sales_avg DECIMAL(10,3),
     avg_quantity_per_order DECIMAL(10,3),
-    number_of_orders INT,
+    number_of_orders INTEGER,
     first_sale_date DATE,
     last_sale_date DATE,
     -- Stock metrics
-    days_of_inventory INT,
-    weeks_of_inventory INT,
-    reorder_point INT,
-    safety_stock INT,
-    reorder_qty INT DEFAULT 0,
-    overstocked_amt INT DEFAULT 0,
+    days_of_inventory INTEGER,
+    weeks_of_inventory INTEGER,
+    reorder_point INTEGER,
+    safety_stock INTEGER,
+    reorder_qty INTEGER DEFAULT 0,
+    overstocked_amt INTEGER DEFAULT 0,
     -- Financial metrics
     avg_margin_percent DECIMAL(10,3),
     total_revenue DECIMAL(10,3),
@@ -50,7 +50,7 @@ CREATE TABLE IF NOT EXISTS product_metrics (
     gross_profit DECIMAL(10,3),
     gmroi DECIMAL(10,3),
     -- Purchase metrics
-    avg_lead_time_days INT,
+    avg_lead_time_days INTEGER,
     last_purchase_date DATE,
     first_received_date DATE,
     last_received_date DATE,
@@ -60,97 +60,99 @@ CREATE TABLE IF NOT EXISTS product_metrics (
     -- Turnover metrics
     turnover_rate DECIMAL(12,3),
     -- Lead time metrics
-    current_lead_time INT,
-    target_lead_time INT,
+    current_lead_time INTEGER,
+    target_lead_time INTEGER,
     lead_time_status VARCHAR(20),
     -- Forecast metrics
     forecast_accuracy DECIMAL(5,2) DEFAULT NULL,
     forecast_bias DECIMAL(5,2) DEFAULT NULL,
     last_forecast_date DATE DEFAULT NULL,
     PRIMARY KEY (pid),
-    FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE,
-    INDEX idx_metrics_revenue (total_revenue),
-    INDEX idx_metrics_stock_status (stock_status),
-    INDEX idx_metrics_lead_time (lead_time_status),
-    INDEX idx_metrics_turnover (turnover_rate),
-    INDEX idx_metrics_last_calculated (last_calculated_at),
-    INDEX idx_metrics_abc (abc_class),
-    INDEX idx_metrics_sales (daily_sales_avg, weekly_sales_avg, monthly_sales_avg),
-    INDEX idx_metrics_forecast (forecast_accuracy, forecast_bias)
+    FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_metrics_revenue ON product_metrics(total_revenue);
+CREATE INDEX idx_metrics_stock_status ON product_metrics(stock_status);
+CREATE INDEX idx_metrics_lead_time ON product_metrics(lead_time_status);
+CREATE INDEX idx_metrics_turnover ON product_metrics(turnover_rate);
+CREATE INDEX idx_metrics_last_calculated ON product_metrics(last_calculated_at);
+CREATE INDEX idx_metrics_abc ON product_metrics(abc_class);
+CREATE INDEX idx_metrics_sales ON product_metrics(daily_sales_avg, weekly_sales_avg, monthly_sales_avg);
+CREATE INDEX idx_metrics_forecast ON product_metrics(forecast_accuracy, forecast_bias);
+
 -- New table for time-based aggregates
-CREATE TABLE IF NOT EXISTS product_time_aggregates (
+CREATE TABLE product_time_aggregates (
     pid BIGINT NOT NULL,
-    year INT NOT NULL,
-    month INT NOT NULL,
+    year INTEGER NOT NULL,
+    month INTEGER NOT NULL,
     -- Sales metrics
-    total_quantity_sold INT DEFAULT 0,
+    total_quantity_sold INTEGER DEFAULT 0,
     total_revenue DECIMAL(10,3) DEFAULT 0,
     total_cost DECIMAL(10,3) DEFAULT 0,
-    order_count INT DEFAULT 0,
+    order_count INTEGER DEFAULT 0,
     -- Stock changes
-    stock_received INT DEFAULT 0,
-    stock_ordered INT DEFAULT 0,
+    stock_received INTEGER DEFAULT 0,
+    stock_ordered INTEGER DEFAULT 0,
     -- Calculated fields
     avg_price DECIMAL(10,3),
     profit_margin DECIMAL(10,3),
     inventory_value DECIMAL(10,3),
     gmroi DECIMAL(10,3),
     PRIMARY KEY (pid, year, month),
-    FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE,
-    INDEX idx_date (year, month)
+    FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE
 );
 
--- Create vendor details table
-CREATE TABLE IF NOT EXISTS vendor_details (
-    vendor VARCHAR(100) NOT NULL,
+CREATE INDEX idx_date ON product_time_aggregates(year, month);
+
+-- Create vendor_details table
+CREATE TABLE vendor_details (
+    vendor VARCHAR(100) PRIMARY KEY,
     contact_name VARCHAR(100),
-    email VARCHAR(100),
-    phone VARCHAR(20),
+    email VARCHAR(255),
+    phone VARCHAR(50),
     status VARCHAR(20) DEFAULT 'active',
-    notes TEXT,
-    created_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
-    PRIMARY KEY (vendor),
-    INDEX idx_vendor_status (status)
+    created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP
 );
 
+CREATE INDEX idx_vendor_details_status ON vendor_details(status);
+
 -- New table for vendor metrics
-CREATE TABLE IF NOT EXISTS vendor_metrics (
+CREATE TABLE vendor_metrics (
     vendor VARCHAR(100) NOT NULL,
     last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     -- Performance metrics
     avg_lead_time_days DECIMAL(10,3),
     on_time_delivery_rate DECIMAL(5,2),
     order_fill_rate DECIMAL(5,2),
-    total_orders INT DEFAULT 0,
-    total_late_orders INT DEFAULT 0,
+    total_orders INTEGER DEFAULT 0,
+    total_late_orders INTEGER DEFAULT 0,
     total_purchase_value DECIMAL(10,3) DEFAULT 0,
     avg_order_value DECIMAL(10,3),
     -- Product metrics
-    active_products INT DEFAULT 0,
-    total_products INT DEFAULT 0,
+    active_products INTEGER DEFAULT 0,
+    total_products INTEGER DEFAULT 0,
     -- Financial metrics
     total_revenue DECIMAL(10,3) DEFAULT 0,
     avg_margin_percent DECIMAL(5,2),
     -- Status
     status VARCHAR(20) DEFAULT 'active',
     PRIMARY KEY (vendor),
-    FOREIGN KEY (vendor) REFERENCES vendor_details(vendor) ON DELETE CASCADE,
-    INDEX idx_vendor_performance (on_time_delivery_rate),
-    INDEX idx_vendor_status (status),
-    INDEX idx_metrics_last_calculated (last_calculated_at),
-    INDEX idx_vendor_metrics_orders (total_orders, total_late_orders)
+    FOREIGN KEY (vendor) REFERENCES vendor_details(vendor) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_vendor_performance ON vendor_metrics(on_time_delivery_rate);
+CREATE INDEX idx_vendor_status ON vendor_metrics(status);
+CREATE INDEX idx_vendor_metrics_last_calculated ON vendor_metrics(last_calculated_at);
+CREATE INDEX idx_vendor_metrics_orders ON vendor_metrics(total_orders, total_late_orders);
+
 -- New table for category metrics
-CREATE TABLE IF NOT EXISTS category_metrics (
+CREATE TABLE category_metrics (
     category_id BIGINT NOT NULL,
     last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     -- Product metrics
-    product_count INT DEFAULT 0,
-    active_products INT DEFAULT 0,
+    product_count INTEGER DEFAULT 0,
+    active_products INTEGER DEFAULT 0,
     -- Financial metrics
     total_value DECIMAL(15,3) DEFAULT 0,
     avg_margin DECIMAL(5,2),
@@ -159,272 +161,215 @@ CREATE TABLE IF NOT EXISTS category_metrics (
     -- Status
     status VARCHAR(20) DEFAULT 'active',
     PRIMARY KEY (category_id),
-    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    INDEX idx_category_status (status),
-    INDEX idx_category_growth (growth_rate),
-    INDEX idx_metrics_last_calculated (last_calculated_at),
-    INDEX idx_category_metrics_products (product_count, active_products)
+    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_category_status ON category_metrics(status);
+CREATE INDEX idx_category_growth ON category_metrics(growth_rate);
+CREATE INDEX idx_metrics_last_calculated_cat ON category_metrics(last_calculated_at);
+CREATE INDEX idx_category_metrics_products ON category_metrics(product_count, active_products);
+
 -- New table for vendor time-based metrics
-CREATE TABLE IF NOT EXISTS vendor_time_metrics (
+CREATE TABLE vendor_time_metrics (
     vendor VARCHAR(100) NOT NULL,
-    year INT NOT NULL,
-    month INT NOT NULL,
+    year INTEGER NOT NULL,
+    month INTEGER NOT NULL,
     -- Order metrics
-    total_orders INT DEFAULT 0,
-    late_orders INT DEFAULT 0,
+    total_orders INTEGER DEFAULT 0,
+    late_orders INTEGER DEFAULT 0,
     avg_lead_time_days DECIMAL(10,3),
     -- Financial metrics
     total_purchase_value DECIMAL(10,3) DEFAULT 0,
     total_revenue DECIMAL(10,3) DEFAULT 0,
     avg_margin_percent DECIMAL(5,2),
     PRIMARY KEY (vendor, year, month),
-    FOREIGN KEY (vendor) REFERENCES vendor_details(vendor) ON DELETE CASCADE,
-    INDEX idx_vendor_date (year, month)
+    FOREIGN KEY (vendor) REFERENCES vendor_details(vendor) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_vendor_date ON vendor_time_metrics(year, month);
+
 -- New table for category time-based metrics
-CREATE TABLE IF NOT EXISTS category_time_metrics (
+CREATE TABLE category_time_metrics (
     category_id BIGINT NOT NULL,
-    year INT NOT NULL,
-    month INT NOT NULL,
+    year INTEGER NOT NULL,
+    month INTEGER NOT NULL,
     -- Product metrics
-    product_count INT DEFAULT 0,
-    active_products INT DEFAULT 0,
+    product_count INTEGER DEFAULT 0,
+    active_products INTEGER DEFAULT 0,
     -- Financial metrics
     total_value DECIMAL(15,3) DEFAULT 0,
     total_revenue DECIMAL(15,3) DEFAULT 0,
     avg_margin DECIMAL(5,2),
     turnover_rate DECIMAL(12,3),
     PRIMARY KEY (category_id, year, month),
-    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    INDEX idx_category_date (year, month)
+    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_category_date ON category_time_metrics(year, month);
+
 -- New table for category-based sales metrics
-CREATE TABLE IF NOT EXISTS category_sales_metrics (
+CREATE TABLE category_sales_metrics (
     category_id BIGINT NOT NULL,
     brand VARCHAR(100) NOT NULL,
     period_start DATE NOT NULL,
     period_end DATE NOT NULL,
     avg_daily_sales DECIMAL(10,3) DEFAULT 0,
-    total_sold INT DEFAULT 0,
-    num_products INT DEFAULT 0,
+    total_sold INTEGER DEFAULT 0,
+    num_products INTEGER DEFAULT 0,
     avg_price DECIMAL(10,3) DEFAULT 0,
     last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (category_id, brand, period_start, period_end),
-    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    INDEX idx_category_brand (category_id, brand),
-    INDEX idx_period (period_start, period_end)
+    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_category_brand ON category_sales_metrics(category_id, brand);
+CREATE INDEX idx_period ON category_sales_metrics(period_start, period_end);
+
 -- New table for brand metrics
-CREATE TABLE IF NOT EXISTS brand_metrics (
+CREATE TABLE brand_metrics (
     brand VARCHAR(100) NOT NULL,
     last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     -- Product metrics
-    product_count INT DEFAULT 0,
-    active_products INT DEFAULT 0,
+    product_count INTEGER DEFAULT 0,
+    active_products INTEGER DEFAULT 0,
     -- Stock metrics
-    total_stock_units INT DEFAULT 0,
+    total_stock_units INTEGER DEFAULT 0,
     total_stock_cost DECIMAL(15,2) DEFAULT 0,
     total_stock_retail DECIMAL(15,2) DEFAULT 0,
     -- Sales metrics
     total_revenue DECIMAL(15,2) DEFAULT 0,
     avg_margin DECIMAL(5,2) DEFAULT 0,
     growth_rate DECIMAL(5,2) DEFAULT 0,
-    PRIMARY KEY (brand),
-    INDEX idx_brand_metrics_last_calculated (last_calculated_at),
-    INDEX idx_brand_metrics_revenue (total_revenue),
-    INDEX idx_brand_metrics_growth (growth_rate)
+    PRIMARY KEY (brand)
 );
 
+CREATE INDEX idx_brand_metrics_last_calculated ON brand_metrics(last_calculated_at);
+CREATE INDEX idx_brand_metrics_revenue ON brand_metrics(total_revenue);
+CREATE INDEX idx_brand_metrics_growth ON brand_metrics(growth_rate);
+
 -- New table for brand time-based metrics
-CREATE TABLE IF NOT EXISTS brand_time_metrics (
+CREATE TABLE brand_time_metrics (
     brand VARCHAR(100) NOT NULL,
-    year INT NOT NULL,
-    month INT NOT NULL,
+    year INTEGER NOT NULL,
+    month INTEGER NOT NULL,
     -- Product metrics
-    product_count INT DEFAULT 0,
-    active_products INT DEFAULT 0,
+    product_count INTEGER DEFAULT 0,
+    active_products INTEGER DEFAULT 0,
     -- Stock metrics
-    total_stock_units INT DEFAULT 0,
+    total_stock_units INTEGER DEFAULT 0,
     total_stock_cost DECIMAL(15,2) DEFAULT 0,
     total_stock_retail DECIMAL(15,2) DEFAULT 0,
     -- Sales metrics
     total_revenue DECIMAL(15,2) DEFAULT 0,
     avg_margin DECIMAL(5,2) DEFAULT 0,
-    PRIMARY KEY (brand, year, month),
-    INDEX idx_brand_date (year, month)
+    growth_rate DECIMAL(5,2) DEFAULT 0,
+    PRIMARY KEY (brand, year, month)
 );
 
+CREATE INDEX idx_brand_time_date ON brand_time_metrics(year, month);
+
 -- New table for sales forecasts
-CREATE TABLE IF NOT EXISTS sales_forecasts (
+CREATE TABLE sales_forecasts (
     pid BIGINT NOT NULL,
     forecast_date DATE NOT NULL,
-    forecast_units DECIMAL(10,2) DEFAULT 0,
-    forecast_revenue DECIMAL(10,2) DEFAULT 0,
-    confidence_level DECIMAL(5,2) DEFAULT 0,
-    last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
+    forecast_quantity INTEGER,
+    confidence_level DECIMAL(5,2),
+    created_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (pid, forecast_date),
-    FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE,
-    INDEX idx_forecast_date (forecast_date),
-    INDEX idx_forecast_last_calculated (last_calculated_at)
+    FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE
 );
 
+CREATE INDEX idx_forecast_date ON sales_forecasts(forecast_date);
+
 -- New table for category forecasts
-CREATE TABLE IF NOT EXISTS category_forecasts (
+CREATE TABLE category_forecasts (
     category_id BIGINT NOT NULL,
     forecast_date DATE NOT NULL,
-    forecast_units DECIMAL(10,2) DEFAULT 0,
-    forecast_revenue DECIMAL(10,2) DEFAULT 0,
-    confidence_level DECIMAL(5,2) DEFAULT 0,
-    last_calculated_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
+    forecast_revenue DECIMAL(15,2),
+    forecast_units INTEGER,
+    confidence_level DECIMAL(5,2),
+    created_at TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     PRIMARY KEY (category_id, forecast_date),
-    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    INDEX idx_category_forecast_date (forecast_date),
-    INDEX idx_category_forecast_last_calculated (last_calculated_at)
+    FOREIGN KEY (category_id) REFERENCES categories(cat_id) ON DELETE CASCADE
 );
 
--- Create view for inventory health
+CREATE INDEX idx_cat_forecast_date ON category_forecasts(forecast_date);
+
+-- Create views for common calculations
 CREATE OR REPLACE VIEW inventory_health AS
-WITH product_thresholds AS (
+WITH stock_levels AS (
     SELECT 
         p.pid,
-        COALESCE(
-            -- Try category+vendor specific
-            (SELECT critical_days FROM stock_thresholds st 
-            JOIN product_categories pc ON st.category_id = pc.cat_id
-            WHERE pc.pid = p.pid 
-            AND st.vendor = p.vendor LIMIT 1),
-            -- Try category specific
-            (SELECT critical_days FROM stock_thresholds st 
-            JOIN product_categories pc ON st.category_id = pc.cat_id
-            WHERE pc.pid = p.pid 
-            AND st.vendor IS NULL LIMIT 1),
-            -- Try vendor specific
-            (SELECT critical_days FROM stock_thresholds st 
-            WHERE st.category_id IS NULL 
-            AND st.vendor = p.vendor LIMIT 1),
-            -- Fall back to default
-            (SELECT critical_days FROM stock_thresholds st 
-            WHERE st.category_id IS NULL 
-            AND st.vendor IS NULL LIMIT 1),
-            7
-        ) as critical_days,
-        COALESCE(
-            -- Try category+vendor specific
-            (SELECT reorder_days FROM stock_thresholds st 
-            JOIN product_categories pc ON st.category_id = pc.cat_id
-            WHERE pc.pid = p.pid 
-            AND st.vendor = p.vendor LIMIT 1),
-            -- Try category specific
-            (SELECT reorder_days FROM stock_thresholds st 
-            JOIN product_categories pc ON st.category_id = pc.cat_id
-            WHERE pc.pid = p.pid 
-            AND st.vendor IS NULL LIMIT 1),
-            -- Try vendor specific
-            (SELECT reorder_days FROM stock_thresholds st 
-            WHERE st.category_id IS NULL 
-            AND st.vendor = p.vendor LIMIT 1),
-            -- Fall back to default
-            (SELECT reorder_days FROM stock_thresholds st 
-            WHERE st.category_id IS NULL 
-            AND st.vendor IS NULL LIMIT 1),
-            14
-        ) as reorder_days,
-        COALESCE(
-            -- Try category+vendor specific
-            (SELECT overstock_days FROM stock_thresholds st 
-            JOIN product_categories pc ON st.category_id = pc.cat_id
-            WHERE pc.pid = p.pid 
-            AND st.vendor = p.vendor LIMIT 1),
-            -- Try category specific
-            (SELECT overstock_days FROM stock_thresholds st 
-            JOIN product_categories pc ON st.category_id = pc.cat_id
-            WHERE pc.pid = p.pid 
-            AND st.vendor IS NULL LIMIT 1),
-            -- Try vendor specific
-            (SELECT overstock_days FROM stock_thresholds st 
-            WHERE st.category_id IS NULL 
-            AND st.vendor = p.vendor LIMIT 1),
-            -- Fall back to default
-            (SELECT overstock_days FROM stock_thresholds st 
-            WHERE st.category_id IS NULL 
-            AND st.vendor IS NULL LIMIT 1),
-            90
-        ) as overstock_days
+        p.title,
+        p.SKU,
+        p.stock_quantity,
+        p.preorder_count,
+        pm.daily_sales_avg,
+        pm.weekly_sales_avg,
+        pm.monthly_sales_avg,
+        pm.reorder_point,
+        pm.safety_stock,
+        pm.days_of_inventory,
+        pm.weeks_of_inventory,
+        pm.stock_status,
+        pm.abc_class,
+        pm.turnover_rate,
+        pm.avg_lead_time_days,
+        pm.current_lead_time,
+        pm.target_lead_time,
+        pm.lead_time_status,
+        p.cost_price,
+        p.price,
+        pm.inventory_value,
+        pm.gmroi
     FROM products p
+    LEFT JOIN product_metrics pm ON p.pid = pm.pid
+    WHERE p.managing_stock = true AND p.visible = true
 )
 SELECT 
-    p.pid,
-    p.SKU,
-    p.title,
-    p.stock_quantity,
-    COALESCE(pm.daily_sales_avg, 0) as daily_sales_avg,
-    COALESCE(pm.days_of_inventory, 0) as days_of_inventory,
-    COALESCE(pm.reorder_point, 0) as reorder_point,
-    COALESCE(pm.safety_stock, 0) as safety_stock,
+    *,
     CASE 
-        WHEN pm.daily_sales_avg = 0 THEN 'New'
-        WHEN p.stock_quantity <= CEIL(pm.daily_sales_avg * pt.critical_days) THEN 'Critical'
-        WHEN p.stock_quantity <= CEIL(pm.daily_sales_avg * pt.reorder_days) THEN 'Reorder'
-        WHEN p.stock_quantity > (pm.daily_sales_avg * pt.overstock_days) THEN 'Overstocked'
+        WHEN stock_quantity <= safety_stock THEN 'Critical'
+        WHEN stock_quantity <= reorder_point THEN 'Low'
+        WHEN stock_quantity > (reorder_point * 3) THEN 'Excess'
         ELSE 'Healthy'
-    END as stock_status
-FROM 
-    products p
-LEFT JOIN 
-    product_metrics pm ON p.pid = pm.pid
-LEFT JOIN
-    product_thresholds pt ON p.pid = pt.pid
-WHERE 
-    p.managing_stock = true;
+    END as inventory_status,
+    CASE 
+        WHEN lead_time_status = 'delayed' AND stock_status = 'low' THEN 'High'
+        WHEN lead_time_status = 'delayed' OR stock_status = 'low' THEN 'Medium'
+        ELSE 'Low'
+    END as risk_level
+FROM stock_levels;
 
 -- Create view for category performance trends
 CREATE OR REPLACE VIEW category_performance_trends AS
+WITH monthly_trends AS (
+    SELECT 
+        c.cat_id,
+        c.name as category_name,
+        ctm.year,
+        ctm.month,
+        ctm.product_count,
+        ctm.active_products,
+        ctm.total_value,
+        ctm.total_revenue,
+        ctm.avg_margin,
+        ctm.turnover_rate,
+        LAG(ctm.total_revenue) OVER (PARTITION BY c.cat_id ORDER BY ctm.year, ctm.month) as prev_month_revenue,
+        LAG(ctm.turnover_rate) OVER (PARTITION BY c.cat_id ORDER BY ctm.year, ctm.month) as prev_month_turnover
+    FROM categories c
+    JOIN category_time_metrics ctm ON c.cat_id = ctm.category_id
+)
 SELECT 
-    c.cat_id as category_id,
-    c.name,
-    c.description,
-    p.name as parent_name,
-    c.status,
-    cm.product_count,
-    cm.active_products,
-    cm.total_value,
-    cm.avg_margin,
-    cm.turnover_rate,
-    cm.growth_rate,
+    *,
     CASE 
-        WHEN cm.growth_rate >= 20 THEN 'High Growth'
-        WHEN cm.growth_rate >= 5 THEN 'Growing'
-        WHEN cm.growth_rate >= -5 THEN 'Stable'
-        ELSE 'Declining'
-    END as performance_rating
-FROM 
-    categories c
-LEFT JOIN 
-    categories p ON c.parent_id = p.cat_id
-LEFT JOIN 
-    category_metrics cm ON c.cat_id = cm.category_id;
+        WHEN prev_month_revenue IS NULL THEN 0
+        ELSE ((total_revenue - prev_month_revenue) / prev_month_revenue) * 100 
+    END as revenue_growth_percent,
+    CASE 
+        WHEN prev_month_turnover IS NULL THEN 0
+        ELSE ((turnover_rate - prev_month_turnover) / prev_month_turnover) * 100 
+    END as turnover_growth_percent
+FROM monthly_trends;
 
--- Re-enable foreign key checks
-SET FOREIGN_KEY_CHECKS = 1;
-
--- Create table for sales seasonality factors
-CREATE TABLE IF NOT EXISTS sales_seasonality (
-    month INT NOT NULL,
-    seasonality_factor DECIMAL(5,3) DEFAULT 0,
-    last_updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
-    PRIMARY KEY (month),
-    CHECK (month BETWEEN 1 AND 12),
-    CHECK (seasonality_factor BETWEEN -1.0 AND 1.0)
-);
-
--- Insert default seasonality factors (neutral)
-INSERT INTO sales_seasonality (month, seasonality_factor)
-VALUES 
-    (1, 0), (2, 0), (3, 0), (4, 0), (5, 0), (6, 0),
-    (7, 0), (8, 0), (9, 0), (10, 0), (11, 0), (12, 0)
-ON DUPLICATE KEY UPDATE last_updated = CURRENT_TIMESTAMP; 
+SET session_replication_role = 'origin';

inventory-server/db/schema.sql

@@ -1,6 +1,5 @@
 -- Enable strict error reporting
-SET sql_mode = 'STRICT_ALL_TABLES,ERROR_FOR_DIVISION_BY_ZERO,NO_ZERO_DATE,NO_ZERO_IN_DATE,NO_ENGINE_SUBSTITUTION';
-SET FOREIGN_KEY_CHECKS = 0;
+SET session_replication_role = 'replica';  -- Disable foreign key checks temporarily
 
 -- Create tables
 CREATE TABLE products (
@@ -8,11 +7,11 @@ CREATE TABLE products (
     title VARCHAR(255) NOT NULL,
     description TEXT,
     SKU VARCHAR(50) NOT NULL,
-    created_at TIMESTAMP NULL,
-    first_received TIMESTAMP NULL,
-    stock_quantity INT DEFAULT 0,
-    preorder_count INT DEFAULT 0,
-    notions_inv_count INT DEFAULT 0,
+    created_at TIMESTAMP,
+    first_received TIMESTAMP,
+    stock_quantity INTEGER DEFAULT 0,
+    preorder_count INTEGER DEFAULT 0,
+    notions_inv_count INTEGER DEFAULT 0,
     price DECIMAL(10, 3) NOT NULL,
     regular_price DECIMAL(10, 3) NOT NULL,
     cost_price DECIMAL(10, 3),
@@ -37,57 +36,52 @@ CREATE TABLE products (
     artist VARCHAR(100),
     options TEXT,
     tags TEXT,
-    moq INT DEFAULT 1,
-    uom INT DEFAULT 1,
+    moq INTEGER DEFAULT 1,
+    uom INTEGER DEFAULT 1,
     rating DECIMAL(10,2) DEFAULT 0.00,
-    reviews INT UNSIGNED DEFAULT 0,
+    reviews INTEGER DEFAULT 0,
     weight DECIMAL(10,3),
     length DECIMAL(10,3),
     width DECIMAL(10,3),
     height DECIMAL(10,3),
     country_of_origin VARCHAR(5),
     location VARCHAR(50),
-    total_sold INT UNSIGNED DEFAULT 0,
-    baskets INT UNSIGNED DEFAULT 0,
-    notifies INT UNSIGNED DEFAULT 0,
+    total_sold INTEGER DEFAULT 0,
+    baskets INTEGER DEFAULT 0,
+    notifies INTEGER DEFAULT 0,
     date_last_sold DATE,
-    PRIMARY KEY (pid),
-    INDEX idx_sku (SKU),
-    INDEX idx_vendor (vendor),
-    INDEX idx_brand (brand),
-    INDEX idx_location (location),
-    INDEX idx_total_sold (total_sold),
-    INDEX idx_date_last_sold (date_last_sold)
-) ENGINE=InnoDB;
+    updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
+    PRIMARY KEY (pid)
+);
+
+-- Create indexes for products table
+CREATE INDEX idx_products_sku ON products(SKU);
+CREATE INDEX idx_products_vendor ON products(vendor);
+CREATE INDEX idx_products_brand ON products(brand);
+CREATE INDEX idx_products_location ON products(location);
+CREATE INDEX idx_products_total_sold ON products(total_sold);
+CREATE INDEX idx_products_date_last_sold ON products(date_last_sold);
+CREATE INDEX idx_products_updated ON products(updated);
 
 -- Create categories table with hierarchy support
 CREATE TABLE categories (
     cat_id BIGINT PRIMARY KEY,
     name VARCHAR(100) NOT NULL,
-    type SMALLINT NOT NULL COMMENT '10=section, 11=category, 12=subcategory, 13=subsubcategory, 1=company, 2=line, 3=subline, 40=artist',
+    type SMALLINT NOT NULL,
     parent_id BIGINT,
     description TEXT,
     created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     status VARCHAR(20) DEFAULT 'active',
-    FOREIGN KEY (parent_id) REFERENCES categories(cat_id),
-    INDEX idx_parent (parent_id),
-    INDEX idx_type (type),
-    INDEX idx_status (status),
-    INDEX idx_name_type (name, type)
-) ENGINE=InnoDB;
+    FOREIGN KEY (parent_id) REFERENCES categories(cat_id)
+);
 
--- Create vendor_details table
-CREATE TABLE vendor_details (
-    vendor VARCHAR(100) PRIMARY KEY,
-    contact_name VARCHAR(100),
-    email VARCHAR(255),
-    phone VARCHAR(50),
-    status VARCHAR(20) DEFAULT 'active',
-    created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
-    updated_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
-    INDEX idx_status (status)
-) ENGINE=InnoDB;
+COMMENT ON COLUMN categories.type IS '10=section, 11=category, 12=subcategory, 13=subsubcategory, 1=company, 2=line, 3=subline, 40=artist';
+
+CREATE INDEX idx_categories_parent ON categories(parent_id);
+CREATE INDEX idx_categories_type ON categories(type);
+CREATE INDEX idx_categories_status ON categories(status);
+CREATE INDEX idx_categories_name_type ON categories(name, type);
 
 -- Create product_categories junction table
 CREATE TABLE product_categories (
@@ -95,74 +89,86 @@ CREATE TABLE product_categories (
     pid BIGINT NOT NULL,
     PRIMARY KEY (pid, cat_id),
     FOREIGN KEY (pid) REFERENCES products(pid) ON DELETE CASCADE,
-    FOREIGN KEY (cat_id) REFERENCES categories(cat_id) ON DELETE CASCADE,
-    INDEX idx_category (cat_id),
-    INDEX idx_product (pid)
-) ENGINE=InnoDB;
+    FOREIGN KEY (cat_id) REFERENCES categories(cat_id) ON DELETE CASCADE
+);
+
+CREATE INDEX idx_product_categories_category ON product_categories(cat_id);
+CREATE INDEX idx_product_categories_product ON product_categories(pid);
 
 -- Create orders table with its indexes
-CREATE TABLE IF NOT EXISTS orders (
-    id BIGINT NOT NULL AUTO_INCREMENT,
+CREATE TABLE orders (
+    id BIGSERIAL PRIMARY KEY,
     order_number VARCHAR(50) NOT NULL,
     pid BIGINT NOT NULL,
     SKU VARCHAR(50) NOT NULL,
     date DATE NOT NULL,
     price DECIMAL(10,3) NOT NULL,
-    quantity INT NOT NULL,
+    quantity INTEGER NOT NULL,
     discount DECIMAL(10,3) DEFAULT 0.000,
     tax DECIMAL(10,3) DEFAULT 0.000,
-    tax_included TINYINT(1) DEFAULT 0,
+    tax_included BOOLEAN DEFAULT false,
     shipping DECIMAL(10,3) DEFAULT 0.000,
     costeach DECIMAL(10,3) DEFAULT 0.000,
     customer VARCHAR(50) NOT NULL,
     customer_name VARCHAR(100),
     status VARCHAR(20) DEFAULT 'pending',
-    canceled TINYINT(1) DEFAULT 0,
-    PRIMARY KEY (id),
-    UNIQUE KEY unique_order_line (order_number, pid),
-    KEY order_number (order_number),
-    KEY pid (pid),
-    KEY customer (customer),
-    KEY date (date),
-    KEY status (status),
-    INDEX idx_orders_metrics (pid, date, canceled)
-) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;
+    canceled BOOLEAN DEFAULT false,
+    updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
+    UNIQUE (order_number, pid)
+);
+
+CREATE INDEX idx_orders_number ON orders(order_number);
+CREATE INDEX idx_orders_pid ON orders(pid);
+CREATE INDEX idx_orders_customer ON orders(customer);
+CREATE INDEX idx_orders_date ON orders(date);
+CREATE INDEX idx_orders_status ON orders(status);
+CREATE INDEX idx_orders_metrics ON orders(pid, date, canceled);
+CREATE INDEX idx_orders_updated ON orders(updated);
 
 -- Create purchase_orders table with its indexes
 CREATE TABLE purchase_orders (
-    id BIGINT AUTO_INCREMENT PRIMARY KEY,
+    id BIGSERIAL PRIMARY KEY,
     po_id VARCHAR(50) NOT NULL,
     vendor VARCHAR(100) NOT NULL,
     date DATE NOT NULL,
     expected_date DATE,
     pid BIGINT NOT NULL,
     sku VARCHAR(50) NOT NULL,
-    name VARCHAR(100) NOT NULL COMMENT 'Product name from products.description',
+    name VARCHAR(100) NOT NULL,
     cost_price DECIMAL(10, 3) NOT NULL,
-    po_cost_price DECIMAL(10, 3) NOT NULL COMMENT 'Original cost from PO, before receiving adjustments',
-    status TINYINT UNSIGNED DEFAULT 1 COMMENT '0=canceled,1=created,10=electronically_ready_send,11=ordered,12=preordered,13=electronically_sent,15=receiving_started,50=done',
-    receiving_status TINYINT UNSIGNED DEFAULT 1 COMMENT '0=canceled,1=created,30=partial_received,40=full_received,50=paid',
+    po_cost_price DECIMAL(10, 3) NOT NULL,
+    status SMALLINT DEFAULT 1,
+    receiving_status SMALLINT DEFAULT 1,
     notes TEXT,
     long_note TEXT,
-    ordered INT NOT NULL,
-    received INT DEFAULT 0,
-    received_date DATE COMMENT 'Date of first receiving',
-    last_received_date DATE COMMENT 'Date of most recent receiving',
-    received_by INT,
-    receiving_history JSON COMMENT 'Array of receiving records with qty, date, cost, receiving_id, and alt_po flag',
+    ordered INTEGER NOT NULL,
+    received INTEGER DEFAULT 0,
+    received_date DATE,
+    last_received_date DATE,
+    received_by VARCHAR(100),
+    receiving_history JSONB,
+    updated TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP,
     FOREIGN KEY (pid) REFERENCES products(pid),
-    INDEX idx_po_id (po_id),
-    INDEX idx_vendor (vendor),
-    INDEX idx_status (status),
-    INDEX idx_receiving_status (receiving_status),
-    INDEX idx_purchase_orders_metrics (pid, date, status, ordered, received),
-    INDEX idx_po_metrics (pid, date, receiving_status, received_date),
-    INDEX idx_po_product_date (pid, date),
-    INDEX idx_po_product_status (pid, status),
-    UNIQUE KEY unique_po_product (po_id, pid)
-) ENGINE=InnoDB;
+    UNIQUE (po_id, pid)
+);
 
-SET FOREIGN_KEY_CHECKS = 1;
+COMMENT ON COLUMN purchase_orders.name IS 'Product name from products.description';
+COMMENT ON COLUMN purchase_orders.po_cost_price IS 'Original cost from PO, before receiving adjustments';
+COMMENT ON COLUMN purchase_orders.status IS '0=canceled,1=created,10=electronically_ready_send,11=ordered,12=preordered,13=electronically_sent,15=receiving_started,50=done';
+COMMENT ON COLUMN purchase_orders.receiving_status IS '0=canceled,1=created,30=partial_received,40=full_received,50=paid';
+COMMENT ON COLUMN purchase_orders.receiving_history IS 'Array of receiving records with qty, date, cost, receiving_id, and alt_po flag';
+
+CREATE INDEX idx_po_id ON purchase_orders(po_id);
+CREATE INDEX idx_po_vendor ON purchase_orders(vendor);
+CREATE INDEX idx_po_status ON purchase_orders(status);
+CREATE INDEX idx_po_receiving_status ON purchase_orders(receiving_status);
+CREATE INDEX idx_po_metrics ON purchase_orders(pid, date, status, ordered, received);
+CREATE INDEX idx_po_metrics_receiving ON purchase_orders(pid, date, receiving_status, received_date);
+CREATE INDEX idx_po_product_date ON purchase_orders(pid, date);
+CREATE INDEX idx_po_product_status ON purchase_orders(pid, status);
+CREATE INDEX idx_po_updated ON purchase_orders(updated);
+
+SET session_replication_role = 'origin';  -- Re-enable foreign key checks
 
 -- Create views for common calculations
 -- product_sales_trends view moved to metrics-schema.sql 

inventory-server/package-lock.json

@@ -9,12 +9,14 @@
       "version": "1.0.0",
       "license": "ISC",
       "dependencies": {
+        "bcrypt": "^5.1.1",
         "cors": "^2.8.5",
         "csv-parse": "^5.6.0",
         "dotenv": "^16.4.7",
         "express": "^4.18.2",
         "multer": "^1.4.5-lts.1",
         "mysql2": "^3.12.0",
+        "pg": "^8.13.2",
         "pm2": "^5.3.0",
         "ssh2": "^1.16.0",
         "uuid": "^9.0.1"
@@ -23,6 +25,74 @@
         "nodemon": "^3.0.2"
       }
     },
+    "node_modules/@mapbox/node-pre-gyp": {
+      "version": "1.0.11",
+      "resolved": "https://registry.npmjs.org/@mapbox/node-pre-gyp/-/node-pre-gyp-1.0.11.tgz",
+      "integrity": "sha512-Yhlar6v9WQgUp/He7BdgzOz8lqMQ8sU+jkCq7Wx8Myc5YFJLbEe7lgui/V7G1qB1DJykHSGwreceSaD60Y0PUQ==",
+      "license": "BSD-3-Clause",
+      "dependencies": {
+        "detect-libc": "^2.0.0",
+        "https-proxy-agent": "^5.0.0",
+        "make-dir": "^3.1.0",
+        "node-fetch": "^2.6.7",
+        "nopt": "^5.0.0",
+        "npmlog": "^5.0.1",
+        "rimraf": "^3.0.2",
+        "semver": "^7.3.5",
+        "tar": "^6.1.11"
+      },
+      "bin": {
+        "node-pre-gyp": "bin/node-pre-gyp"
+      }
+    },
+    "node_modules/@mapbox/node-pre-gyp/node_modules/agent-base": {
+      "version": "6.0.2",
+      "resolved": "https://registry.npmjs.org/agent-base/-/agent-base-6.0.2.tgz",
+      "integrity": "sha512-RZNwNclF7+MS/8bDg70amg32dyeZGZxiDuQmZxKLAlQjr3jGyLx+4Kkk58UO7D2QdgFIQCovuSuZESne6RG6XQ==",
+      "license": "MIT",
+      "dependencies": {
+        "debug": "4"
+      },
+      "engines": {
+        "node": ">= 6.0.0"
+      }
+    },
+    "node_modules/@mapbox/node-pre-gyp/node_modules/debug": {
+      "version": "4.4.0",
+      "resolved": "https://registry.npmjs.org/debug/-/debug-4.4.0.tgz",
+      "integrity": "sha512-6WTZ/IxCY/T6BALoZHaE4ctp9xm+Z5kY/pzYaCHRFeyVhojxlrm+46y68HA6hr0TcwEssoxNiDEUJQjfPZ/RYA==",
+      "license": "MIT",
+      "dependencies": {
+        "ms": "^2.1.3"
+      },
+      "engines": {
+        "node": ">=6.0"
+      },
+      "peerDependenciesMeta": {
+        "supports-color": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/@mapbox/node-pre-gyp/node_modules/https-proxy-agent": {
+      "version": "5.0.1",
+      "resolved": "https://registry.npmjs.org/https-proxy-agent/-/https-proxy-agent-5.0.1.tgz",
+      "integrity": "sha512-dFcAjpTQFgoLMzC2VwU+C/CbS7uRL0lWmxDITmqm7C+7F0Odmj6s9l6alZc6AELXhrnggM2CeWSXHGOdX2YtwA==",
+      "license": "MIT",
+      "dependencies": {
+        "agent-base": "6",
+        "debug": "4"
+      },
+      "engines": {
+        "node": ">= 6"
+      }
+    },
+    "node_modules/@mapbox/node-pre-gyp/node_modules/ms": {
+      "version": "2.1.3",
+      "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.3.tgz",
+      "integrity": "sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==",
+      "license": "MIT"
+    },
     "node_modules/@pm2/agent": {
       "version": "2.0.4",
       "resolved": "https://registry.npmjs.org/@pm2/agent/-/agent-2.0.4.tgz",
@@ -276,6 +346,12 @@
       "integrity": "sha512-C5Mc6rdnsaJDjO3UpGW/CQTHtCKaYlScZTly4JIu97Jxo/odCiH0ITnDXSJPTOrEKk/ycSZ0AOgTmkDtkOsvIA==",
       "license": "MIT"
     },
+    "node_modules/abbrev": {
+      "version": "1.1.1",
+      "resolved": "https://registry.npmjs.org/abbrev/-/abbrev-1.1.1.tgz",
+      "integrity": "sha512-nne9/IiQ/hzIhY6pdDnbBtz7DjPTKrY00P/zvPSm5pOFkl6xuGrGnXn/VtTNNfNtAfZ9/1RtehkszU9qcTii0Q==",
+      "license": "ISC"
+    },
     "node_modules/accepts": {
       "version": "1.3.8",
       "resolved": "https://registry.npmjs.org/accepts/-/accepts-1.3.8.tgz",
@@ -322,6 +398,15 @@
         "node": ">=6"
       }
     },
+    "node_modules/ansi-regex": {
+      "version": "5.0.1",
+      "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-5.0.1.tgz",
+      "integrity": "sha512-quJQXlTSUGL2LH9SUXo8VwsY4soanhgo6LNSm84E1LBcE8s3O0wpdiRzyR9z/ZZJMlMWv37qOOb9pdJlMUEKFQ==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=8"
+      }
+    },
     "node_modules/ansi-styles": {
       "version": "4.3.0",
       "resolved": "https://registry.npmjs.org/ansi-styles/-/ansi-styles-4.3.0.tgz",
@@ -356,6 +441,40 @@
       "integrity": "sha512-klpgFSWLW1ZEs8svjfb7g4qWY0YS5imI82dTg+QahUvJ8YqAY0P10Uk8tTyh9ZGuYEZEMaeJYCF5BFuX552hsw==",
       "license": "MIT"
     },
+    "node_modules/aproba": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/aproba/-/aproba-2.0.0.tgz",
+      "integrity": "sha512-lYe4Gx7QT+MKGbDsA+Z+he/Wtef0BiwDOlK/XkBrdfsh9J/jPPXbX0tE9x9cl27Tmu5gg3QUbUrQYa/y+KOHPQ==",
+      "license": "ISC"
+    },
+    "node_modules/are-we-there-yet": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/are-we-there-yet/-/are-we-there-yet-2.0.0.tgz",
+      "integrity": "sha512-Ci/qENmwHnsYo9xKIcUJN5LeDKdJ6R1Z1j9V/J5wyq8nh/mYPEpIKJbBZXtZjG04HiK7zV/p6Vs9952MrMeUIw==",
+      "deprecated": "This package is no longer supported.",
+      "license": "ISC",
+      "dependencies": {
+        "delegates": "^1.0.0",
+        "readable-stream": "^3.6.0"
+      },
+      "engines": {
+        "node": ">=10"
+      }
+    },
+    "node_modules/are-we-there-yet/node_modules/readable-stream": {
+      "version": "3.6.2",
+      "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-3.6.2.tgz",
+      "integrity": "sha512-9u/sniCrY3D5WdsERHzHE4G2YCXqoG5FTHUiCC4SIbr6XcLZBY05ya9EKjYek9O5xOAwjGq+1JdGBAS7Q9ScoA==",
+      "license": "MIT",
+      "dependencies": {
+        "inherits": "^2.0.3",
+        "string_decoder": "^1.1.1",
+        "util-deprecate": "^1.0.1"
+      },
+      "engines": {
+        "node": ">= 6"
+      }
+    },
     "node_modules/argparse": {
       "version": "2.0.1",
       "resolved": "https://registry.npmjs.org/argparse/-/argparse-2.0.1.tgz",
@@ -414,7 +533,6 @@
       "version": "1.0.2",
       "resolved": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.2.tgz",
       "integrity": "sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==",
-      "dev": true,
       "license": "MIT"
     },
     "node_modules/basic-ftp": {
@@ -426,6 +544,20 @@
         "node": ">=10.0.0"
       }
     },
+    "node_modules/bcrypt": {
+      "version": "5.1.1",
+      "resolved": "https://registry.npmjs.org/bcrypt/-/bcrypt-5.1.1.tgz",
+      "integrity": "sha512-AGBHOG5hPYZ5Xl9KXzU5iKq9516yEmvCKDg3ecP5kX2aB6UqTeXZxk2ELnDgDm6BQSMlLt9rDB4LoSMx0rYwww==",
+      "hasInstallScript": true,
+      "license": "MIT",
+      "dependencies": {
+        "@mapbox/node-pre-gyp": "^1.0.11",
+        "node-addon-api": "^5.0.0"
+      },
+      "engines": {
+        "node": ">= 10.0.0"
+      }
+    },
     "node_modules/bcrypt-pbkdf": {
       "version": "1.0.2",
       "resolved": "https://registry.npmjs.org/bcrypt-pbkdf/-/bcrypt-pbkdf-1.0.2.tgz",
@@ -493,7 +625,6 @@
       "version": "1.1.11",
       "resolved": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.11.tgz",
       "integrity": "sha512-iCuPHDFgrHX7H2vEI/5xpz07zSHB00TpugqhmYtVmMO6518mCuRMoOYFldEBl0g187ufozdaHgWKcYFb61qGiA==",
-      "dev": true,
       "license": "MIT",
       "dependencies": {
         "balanced-match": "^1.0.0",
@@ -619,6 +750,15 @@
         "fsevents": "~2.3.2"
       }
     },
+    "node_modules/chownr": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/chownr/-/chownr-2.0.0.tgz",
+      "integrity": "sha512-bIomtDF5KGpdogkLd9VspvFzk9KfpyyGlS8YFVZl7TGPBHL5snIOnxeshwVgPteQ9b4Eydl+pVbIyE1DcvCWgQ==",
+      "license": "ISC",
+      "engines": {
+        "node": ">=10"
+      }
+    },
     "node_modules/cli-tableau": {
       "version": "2.0.1",
       "resolved": "https://registry.npmjs.org/cli-tableau/-/cli-tableau-2.0.1.tgz",
@@ -648,6 +788,15 @@
       "integrity": "sha512-dOy+3AuW3a2wNbZHIuMZpTcgjGuLU/uBL/ubcZF9OXbDo8ff4O8yVp5Bf0efS8uEoYo5q4Fx7dY9OgQGXgAsQA==",
       "license": "MIT"
     },
+    "node_modules/color-support": {
+      "version": "1.1.3",
+      "resolved": "https://registry.npmjs.org/color-support/-/color-support-1.1.3.tgz",
+      "integrity": "sha512-qiBjkpbMLO/HL68y+lh4q0/O1MZFj2RX6X/KmMa3+gJD3z+WwI1ZzDHysvqHGS3mP6mznPckpXmw1nI9cJjyRg==",
+      "license": "ISC",
+      "bin": {
+        "color-support": "bin.js"
+      }
+    },
     "node_modules/commander": {
       "version": "2.15.1",
       "resolved": "https://registry.npmjs.org/commander/-/commander-2.15.1.tgz",
@@ -658,7 +807,6 @@
       "version": "0.0.1",
       "resolved": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz",
       "integrity": "sha512-/Srv4dswyQNBfohGpz9o6Yb3Gz3SrUDqBH5rTuhGR7ahtlbYKnVxw2bCFMRljaA7EXHaXZ8wsHdodFvbkhKmqg==",
-      "dev": true,
       "license": "MIT"
     },
     "node_modules/concat-stream": {
@@ -676,6 +824,12 @@
         "typedarray": "^0.0.6"
       }
     },
+    "node_modules/console-control-strings": {
+      "version": "1.1.0",
+      "resolved": "https://registry.npmjs.org/console-control-strings/-/console-control-strings-1.1.0.tgz",
+      "integrity": "sha512-ty/fTekppD2fIwRvnZAVdeOiGd1c7YXEixbgJTNzqcxJWKQnjJ/V1bNEEE6hygpM3WjwHFUVK6HTjWSzV4a8sQ==",
+      "license": "ISC"
+    },
     "node_modules/content-disposition": {
       "version": "0.5.4",
       "resolved": "https://registry.npmjs.org/content-disposition/-/content-disposition-0.5.4.tgz",
@@ -801,6 +955,12 @@
         "node": ">= 14"
       }
     },
+    "node_modules/delegates": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/delegates/-/delegates-1.0.0.tgz",
+      "integrity": "sha512-bd2L678uiWATM6m5Z1VzNCErI3jiGzt6HGY8OVICs40JQq/HALfbyNJmp0UDakEY4pMMaN0Ly5om/B1VI/+xfQ==",
+      "license": "MIT"
+    },
     "node_modules/denque": {
       "version": "2.1.0",
       "resolved": "https://registry.npmjs.org/denque/-/denque-2.1.0.tgz",
@@ -829,6 +989,15 @@
         "npm": "1.2.8000 || >= 1.4.16"
       }
     },
+    "node_modules/detect-libc": {
+      "version": "2.0.3",
+      "resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-2.0.3.tgz",
+      "integrity": "sha512-bwy0MGW55bG41VqxxypOsdSdGqLwXPI/focwgTYCFMbdUiBAxLg9CFzG08sz2aqzknwiX7Hkl0bQENjg8iLByw==",
+      "license": "Apache-2.0",
+      "engines": {
+        "node": ">=8"
+      }
+    },
     "node_modules/dotenv": {
       "version": "16.4.7",
       "resolved": "https://registry.npmjs.org/dotenv/-/dotenv-16.4.7.tgz",
@@ -861,6 +1030,12 @@
       "integrity": "sha512-WMwm9LhRUo+WUaRN+vRuETqG89IgZphVSNkdFgeb6sS/E4OrDIN7t48CAewSHXc6C8lefD8KKfr5vY61brQlow==",
       "license": "MIT"
     },
+    "node_modules/emoji-regex": {
+      "version": "8.0.0",
+      "resolved": "https://registry.npmjs.org/emoji-regex/-/emoji-regex-8.0.0.tgz",
+      "integrity": "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A==",
+      "license": "MIT"
+    },
     "node_modules/encodeurl": {
       "version": "2.0.0",
       "resolved": "https://registry.npmjs.org/encodeurl/-/encodeurl-2.0.0.tgz",
@@ -1132,6 +1307,36 @@
         "node": ">= 0.6"
       }
     },
+    "node_modules/fs-minipass": {
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/fs-minipass/-/fs-minipass-2.1.0.tgz",
+      "integrity": "sha512-V/JgOLFCS+R6Vcq0slCuaeWEdNC3ouDlJMNIsacH2VtALiu9mV4LPrHc5cDl8k5aw6J8jwgWWpiTo5RYhmIzvg==",
+      "license": "ISC",
+      "dependencies": {
+        "minipass": "^3.0.0"
+      },
+      "engines": {
+        "node": ">= 8"
+      }
+    },
+    "node_modules/fs-minipass/node_modules/minipass": {
+      "version": "3.3.6",
+      "resolved": "https://registry.npmjs.org/minipass/-/minipass-3.3.6.tgz",
+      "integrity": "sha512-DxiNidxSEK+tHG6zOIklvNOwm3hvCrbUrdtzY74U6HKTJxvIDfOUL5W5P2Ghd3DTkhhKPYGqeNUIh5qcM4YBfw==",
+      "license": "ISC",
+      "dependencies": {
+        "yallist": "^4.0.0"
+      },
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/fs.realpath": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz",
+      "integrity": "sha512-OO0pH2lK6a0hZnAdau5ItzHPI6pUlvI7jMVnxUQRtw4owF2wk8lOSabtGDCTP4Ggrg2MbGnWO9X8K1t4+fGMDw==",
+      "license": "ISC"
+    },
     "node_modules/fsevents": {
       "version": "2.3.3",
       "resolved": "https://registry.npmjs.org/fsevents/-/fsevents-2.3.3.tgz",
@@ -1155,6 +1360,27 @@
         "url": "https://github.com/sponsors/ljharb"
       }
     },
+    "node_modules/gauge": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/gauge/-/gauge-3.0.2.tgz",
+      "integrity": "sha512-+5J6MS/5XksCuXq++uFRsnUd7Ovu1XenbeuIuNRJxYWjgQbPuFhT14lAvsWfqfAmnwluf1OwMjz39HjfLPci0Q==",
+      "deprecated": "This package is no longer supported.",
+      "license": "ISC",
+      "dependencies": {
+        "aproba": "^1.0.3 || ^2.0.0",
+        "color-support": "^1.1.2",
+        "console-control-strings": "^1.0.0",
+        "has-unicode": "^2.0.1",
+        "object-assign": "^4.1.1",
+        "signal-exit": "^3.0.0",
+        "string-width": "^4.2.3",
+        "strip-ansi": "^6.0.1",
+        "wide-align": "^1.1.2"
+      },
+      "engines": {
+        "node": ">=10"
+      }
+    },
     "node_modules/generate-function": {
       "version": "2.3.1",
       "resolved": "https://registry.npmjs.org/generate-function/-/generate-function-2.3.1.tgz",
@@ -1250,6 +1476,27 @@
       "integrity": "sha512-2e/nZezdVlyCopOCYHeW0onkbZg7xP1Ad6pndPy1rCygeRykefUS6r7oA5cJRGEFvseiaz5a/qUHFVX1dd6Isg==",
       "license": "MIT"
     },
+    "node_modules/glob": {
+      "version": "7.2.3",
+      "resolved": "https://registry.npmjs.org/glob/-/glob-7.2.3.tgz",
+      "integrity": "sha512-nFR0zLpU2YCaRxwoCJvL6UvCH2JFyFVIvwTLsIf21AuHlMskA1hhTdk+LlYJtOlYt9v6dvszD2BGRqBL+iQK9Q==",
+      "deprecated": "Glob versions prior to v9 are no longer supported",
+      "license": "ISC",
+      "dependencies": {
+        "fs.realpath": "^1.0.0",
+        "inflight": "^1.0.4",
+        "inherits": "2",
+        "minimatch": "^3.1.1",
+        "once": "^1.3.0",
+        "path-is-absolute": "^1.0.0"
+      },
+      "engines": {
+        "node": "*"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/isaacs"
+      }
+    },
     "node_modules/glob-parent": {
       "version": "5.1.2",
       "resolved": "https://registry.npmjs.org/glob-parent/-/glob-parent-5.1.2.tgz",
@@ -1295,6 +1542,12 @@
         "url": "https://github.com/sponsors/ljharb"
       }
     },
+    "node_modules/has-unicode": {
+      "version": "2.0.1",
+      "resolved": "https://registry.npmjs.org/has-unicode/-/has-unicode-2.0.1.tgz",
+      "integrity": "sha512-8Rf9Y83NBReMnx0gFzA8JImQACstCYWUplepDa9xprwwtmgEZUF0h/i5xSA625zB/I37EtrswSST6OXxwaaIJQ==",
+      "license": "ISC"
+    },
     "node_modules/hasown": {
       "version": "2.0.2",
       "resolved": "https://registry.npmjs.org/hasown/-/hasown-2.0.2.tgz",
@@ -1414,6 +1667,17 @@
       "dev": true,
       "license": "ISC"
     },
+    "node_modules/inflight": {
+      "version": "1.0.6",
+      "resolved": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz",
+      "integrity": "sha512-k92I/b08q4wvFscXCLvqfsHCrjrF7yiXsQuIVvVE7N82W3+aqpzuUdBbfhWcy/FZR3/4IgflMgKLOsvPDrGCJA==",
+      "deprecated": "This module is not supported, and leaks memory. Do not use it. Check out lru-cache if you want a good and tested way to coalesce async requests by a key value, which is much more comprehensive and powerful.",
+      "license": "ISC",
+      "dependencies": {
+        "once": "^1.3.0",
+        "wrappy": "1"
+      }
+    },
     "node_modules/inherits": {
       "version": "2.0.4",
       "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.4.tgz",
@@ -1490,6 +1754,15 @@
         "node": ">=0.10.0"
       }
     },
+    "node_modules/is-fullwidth-code-point": {
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/is-fullwidth-code-point/-/is-fullwidth-code-point-3.0.0.tgz",
+      "integrity": "sha512-zymm5+u+sCsSWyD9qNaejV3DFvhCKclKdizYaJUuHA83RLjb7nSuGnddCHGv0hk+KY7BMAlsWeK4Ueg6EV6XQg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=8"
+      }
+    },
     "node_modules/is-glob": {
       "version": "4.0.3",
       "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-4.0.3.tgz",
@@ -1605,6 +1878,30 @@
         "url": "https://github.com/sponsors/wellwelwel"
       }
     },
+    "node_modules/make-dir": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmjs.org/make-dir/-/make-dir-3.1.0.tgz",
+      "integrity": "sha512-g3FeP20LNwhALb/6Cz6Dd4F2ngze0jz7tbzrD2wAV+o9FeNHe4rL+yK2md0J/fiSf1sa1ADhXqi5+oVwOM/eGw==",
+      "license": "MIT",
+      "dependencies": {
+        "semver": "^6.0.0"
+      },
+      "engines": {
+        "node": ">=8"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/sindresorhus"
+      }
+    },
+    "node_modules/make-dir/node_modules/semver": {
+      "version": "6.3.1",
+      "resolved": "https://registry.npmjs.org/semver/-/semver-6.3.1.tgz",
+      "integrity": "sha512-BR7VvDCVHO+q2xBEWskxS6DJE1qRnb7DxzUrogb71CWoSficBxYsiAGd+Kl0mmq/MprG9yArRkyrQxTO6XjMzA==",
+      "license": "ISC",
+      "bin": {
+        "semver": "bin/semver.js"
+      }
+    },
     "node_modules/math-intrinsics": {
       "version": "1.1.0",
       "resolved": "https://registry.npmjs.org/math-intrinsics/-/math-intrinsics-1.1.0.tgz",
@@ -1678,7 +1975,6 @@
       "version": "3.1.2",
       "resolved": "https://registry.npmjs.org/minimatch/-/minimatch-3.1.2.tgz",
       "integrity": "sha512-J7p63hRiAjw1NDEww1W7i37+ByIrOWO5XQQAzZ3VOcL0PNybwpfmV/N05zFAzwQ9USyEcX6t3UO+K5aqBQOIHw==",
-      "dev": true,
       "license": "ISC",
       "dependencies": {
         "brace-expansion": "^1.1.7"
@@ -1696,6 +1992,40 @@
         "url": "https://github.com/sponsors/ljharb"
       }
     },
+    "node_modules/minipass": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/minipass/-/minipass-5.0.0.tgz",
+      "integrity": "sha512-3FnjYuehv9k6ovOEbyOswadCDPX1piCfhV8ncmYtHOjuPwylVWsghTLo7rabjC3Rx5xD4HDx8Wm1xnMF7S5qFQ==",
+      "license": "ISC",
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/minizlib": {
+      "version": "2.1.2",
+      "resolved": "https://registry.npmjs.org/minizlib/-/minizlib-2.1.2.tgz",
+      "integrity": "sha512-bAxsR8BVfj60DWXHE3u30oHzfl4G7khkSuPW+qvpd7jFRHm7dLxOjUk1EHACJ/hxLY8phGJ0YhYHZo7jil7Qdg==",
+      "license": "MIT",
+      "dependencies": {
+        "minipass": "^3.0.0",
+        "yallist": "^4.0.0"
+      },
+      "engines": {
+        "node": ">= 8"
+      }
+    },
+    "node_modules/minizlib/node_modules/minipass": {
+      "version": "3.3.6",
+      "resolved": "https://registry.npmjs.org/minipass/-/minipass-3.3.6.tgz",
+      "integrity": "sha512-DxiNidxSEK+tHG6zOIklvNOwm3hvCrbUrdtzY74U6HKTJxvIDfOUL5W5P2Ghd3DTkhhKPYGqeNUIh5qcM4YBfw==",
+      "license": "ISC",
+      "dependencies": {
+        "yallist": "^4.0.0"
+      },
+      "engines": {
+        "node": ">=8"
+      }
+    },
     "node_modules/mkdirp": {
       "version": "1.0.4",
       "resolved": "https://registry.npmjs.org/mkdirp/-/mkdirp-1.0.4.tgz",
@@ -1857,6 +2187,32 @@
         "node": ">= 0.4.0"
       }
     },
+    "node_modules/node-addon-api": {
+      "version": "5.1.0",
+      "resolved": "https://registry.npmjs.org/node-addon-api/-/node-addon-api-5.1.0.tgz",
+      "integrity": "sha512-eh0GgfEkpnoWDq+VY8OyvYhFEzBk6jIYbRKdIlyTiAXIVJ8PyBaKb0rp7oDtoddbdoHWhq8wwr+XZ81F1rpNdA==",
+      "license": "MIT"
+    },
+    "node_modules/node-fetch": {
+      "version": "2.7.0",
+      "resolved": "https://registry.npmjs.org/node-fetch/-/node-fetch-2.7.0.tgz",
+      "integrity": "sha512-c4FRfUm/dbcWZ7U+1Wq0AwCyFL+3nt2bEw05wfxSz+DWpWsitgmSgYmy2dQdWyKC1694ELPqMs/YzUSNozLt8A==",
+      "license": "MIT",
+      "dependencies": {
+        "whatwg-url": "^5.0.0"
+      },
+      "engines": {
+        "node": "4.x || >=6.0.0"
+      },
+      "peerDependencies": {
+        "encoding": "^0.1.0"
+      },
+      "peerDependenciesMeta": {
+        "encoding": {
+          "optional": true
+        }
+      }
+    },
     "node_modules/nodemon": {
       "version": "3.1.9",
       "resolved": "https://registry.npmjs.org/nodemon/-/nodemon-3.1.9.tgz",
@@ -1934,6 +2290,21 @@
         "node": ">=4"
       }
     },
+    "node_modules/nopt": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/nopt/-/nopt-5.0.0.tgz",
+      "integrity": "sha512-Tbj67rffqceeLpcRXrT7vKAN8CwfPeIBgM7E6iBkmKLV7bEMwpGgYLGv0jACUsECaa/vuxP0IjEont6umdMgtQ==",
+      "license": "ISC",
+      "dependencies": {
+        "abbrev": "1"
+      },
+      "bin": {
+        "nopt": "bin/nopt.js"
+      },
+      "engines": {
+        "node": ">=6"
+      }
+    },
     "node_modules/normalize-path": {
       "version": "3.0.0",
       "resolved": "https://registry.npmjs.org/normalize-path/-/normalize-path-3.0.0.tgz",
@@ -1943,6 +2314,19 @@
         "node": ">=0.10.0"
       }
     },
+    "node_modules/npmlog": {
+      "version": "5.0.1",
+      "resolved": "https://registry.npmjs.org/npmlog/-/npmlog-5.0.1.tgz",
+      "integrity": "sha512-AqZtDUWOMKs1G/8lwylVjrdYgqA4d9nu8hc+0gzRxlDb1I10+FHBGMXs6aiQHFdCUUlqH99MUMuLfzWDNDtfxw==",
+      "deprecated": "This package is no longer supported.",
+      "license": "ISC",
+      "dependencies": {
+        "are-we-there-yet": "^2.0.0",
+        "console-control-strings": "^1.1.0",
+        "gauge": "^3.0.0",
+        "set-blocking": "^2.0.0"
+      }
+    },
     "node_modules/nssocket": {
       "version": "0.6.0",
       "resolved": "https://registry.npmjs.org/nssocket/-/nssocket-0.6.0.tgz",
@@ -1995,6 +2379,15 @@
         "node": ">= 0.8"
       }
     },
+    "node_modules/once": {
+      "version": "1.4.0",
+      "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+      "integrity": "sha512-lNaJgI+2Q5URQBkccEKHTQOPaXdUxnZZElQTZY0MFUAuaEqe1E+Nyvgdz/aIyNi6Z9MzO5dv1H8n58/GELp3+w==",
+      "license": "ISC",
+      "dependencies": {
+        "wrappy": "1"
+      }
+    },
     "node_modules/pac-proxy-agent": {
       "version": "7.1.0",
       "resolved": "https://registry.npmjs.org/pac-proxy-agent/-/pac-proxy-agent-7.1.0.tgz",
@@ -2065,6 +2458,15 @@
         "node": ">= 0.8"
       }
     },
+    "node_modules/path-is-absolute": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz",
+      "integrity": "sha512-AVbw3UJ2e9bq64vSaS9Am0fje1Pa8pbGqTTsmXfaIiMpnr5DlDhfJOuLj9Sf95ZPVDAUerDfEk88MPmPe7UCQg==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
     "node_modules/path-parse": {
       "version": "1.0.7",
       "resolved": "https://registry.npmjs.org/path-parse/-/path-parse-1.0.7.tgz",
@@ -2077,6 +2479,95 @@
       "integrity": "sha512-RA1GjUVMnvYFxuqovrEqZoxxW5NUZqbwKtYz/Tt7nXerk0LbLblQmrsgdeOxV5SFHf0UDggjS/bSeOZwt1pmEQ==",
       "license": "MIT"
     },
+    "node_modules/pg": {
+      "version": "8.13.2",
+      "resolved": "https://registry.npmjs.org/pg/-/pg-8.13.2.tgz",
+      "integrity": "sha512-L5QkPvTjVWWHbLaFjCkOSplpb2uCiRYbg0IJ2okCy5ClYfWlSgDDnvdR6dyw3EWAH2AfS4j8E61QFI7gLfTtlw==",
+      "license": "MIT",
+      "dependencies": {
+        "pg-connection-string": "^2.7.0",
+        "pg-pool": "^3.7.1",
+        "pg-protocol": "^1.7.1",
+        "pg-types": "^2.1.0",
+        "pgpass": "1.x"
+      },
+      "engines": {
+        "node": ">= 8.0.0"
+      },
+      "optionalDependencies": {
+        "pg-cloudflare": "^1.1.1"
+      },
+      "peerDependencies": {
+        "pg-native": ">=3.0.1"
+      },
+      "peerDependenciesMeta": {
+        "pg-native": {
+          "optional": true
+        }
+      }
+    },
+    "node_modules/pg-cloudflare": {
+      "version": "1.1.1",
+      "resolved": "https://registry.npmjs.org/pg-cloudflare/-/pg-cloudflare-1.1.1.tgz",
+      "integrity": "sha512-xWPagP/4B6BgFO+EKz3JONXv3YDgvkbVrGw2mTo3D6tVDQRh1e7cqVGvyR3BE+eQgAvx1XhW/iEASj4/jCWl3Q==",
+      "license": "MIT",
+      "optional": true
+    },
+    "node_modules/pg-connection-string": {
+      "version": "2.7.0",
+      "resolved": "https://registry.npmjs.org/pg-connection-string/-/pg-connection-string-2.7.0.tgz",
+      "integrity": "sha512-PI2W9mv53rXJQEOb8xNR8lH7Hr+EKa6oJa38zsK0S/ky2er16ios1wLKhZyxzD7jUReiWokc9WK5nxSnC7W1TA==",
+      "license": "MIT"
+    },
+    "node_modules/pg-int8": {
+      "version": "1.0.1",
+      "resolved": "https://registry.npmjs.org/pg-int8/-/pg-int8-1.0.1.tgz",
+      "integrity": "sha512-WCtabS6t3c8SkpDBUlb1kjOs7l66xsGdKpIPZsg4wR+B3+u9UAum2odSsF9tnvxg80h4ZxLWMy4pRjOsFIqQpw==",
+      "license": "ISC",
+      "engines": {
+        "node": ">=4.0.0"
+      }
+    },
+    "node_modules/pg-pool": {
+      "version": "3.7.1",
+      "resolved": "https://registry.npmjs.org/pg-pool/-/pg-pool-3.7.1.tgz",
+      "integrity": "sha512-xIOsFoh7Vdhojas6q3596mXFsR8nwBQBXX5JiV7p9buEVAGqYL4yFzclON5P9vFrpu1u7Zwl2oriyDa89n0wbw==",
+      "license": "MIT",
+      "peerDependencies": {
+        "pg": ">=8.0"
+      }
+    },
+    "node_modules/pg-protocol": {
+      "version": "1.7.1",
+      "resolved": "https://registry.npmjs.org/pg-protocol/-/pg-protocol-1.7.1.tgz",
+      "integrity": "sha512-gjTHWGYWsEgy9MsY0Gp6ZJxV24IjDqdpTW7Eh0x+WfJLFsm/TJx1MzL6T0D88mBvkpxotCQ6TwW6N+Kko7lhgQ==",
+      "license": "MIT"
+    },
+    "node_modules/pg-types": {
+      "version": "2.2.0",
+      "resolved": "https://registry.npmjs.org/pg-types/-/pg-types-2.2.0.tgz",
+      "integrity": "sha512-qTAAlrEsl8s4OiEQY69wDvcMIdQN6wdz5ojQiOy6YRMuynxenON0O5oCpJI6lshc6scgAY8qvJ2On/p+CXY0GA==",
+      "license": "MIT",
+      "dependencies": {
+        "pg-int8": "1.0.1",
+        "postgres-array": "~2.0.0",
+        "postgres-bytea": "~1.0.0",
+        "postgres-date": "~1.0.4",
+        "postgres-interval": "^1.1.0"
+      },
+      "engines": {
+        "node": ">=4"
+      }
+    },
+    "node_modules/pgpass": {
+      "version": "1.0.5",
+      "resolved": "https://registry.npmjs.org/pgpass/-/pgpass-1.0.5.tgz",
+      "integrity": "sha512-FdW9r/jQZhSeohs1Z3sI1yxFQNFvMcnmfuj4WBMUTxOrAyLMaTcE1aAMBiTlbMNaXvBCQuVi0R7hd8udDSP7ug==",
+      "license": "MIT",
+      "dependencies": {
+        "split2": "^4.1.0"
+      }
+    },
     "node_modules/picomatch": {
       "version": "2.3.1",
       "resolved": "https://registry.npmjs.org/picomatch/-/picomatch-2.3.1.tgz",
@@ -2320,6 +2811,45 @@
       "integrity": "sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==",
       "license": "MIT"
     },
+    "node_modules/postgres-array": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/postgres-array/-/postgres-array-2.0.0.tgz",
+      "integrity": "sha512-VpZrUqU5A69eQyW2c5CA1jtLecCsN2U/bD6VilrFDWq5+5UIEVO7nazS3TEcHf1zuPYO/sqGvUvW62g86RXZuA==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=4"
+      }
+    },
+    "node_modules/postgres-bytea": {
+      "version": "1.0.0",
+      "resolved": "https://registry.npmjs.org/postgres-bytea/-/postgres-bytea-1.0.0.tgz",
+      "integrity": "sha512-xy3pmLuQqRBZBXDULy7KbaitYqLcmxigw14Q5sj8QBVLqEwXfeybIKVWiqAXTlcvdvb0+xkOtDbfQMOf4lST1w==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/postgres-date": {
+      "version": "1.0.7",
+      "resolved": "https://registry.npmjs.org/postgres-date/-/postgres-date-1.0.7.tgz",
+      "integrity": "sha512-suDmjLVQg78nMK2UZ454hAG+OAW+HQPZ6n++TNDUX+L0+uUlLywnoxJKDou51Zm+zTCjrCl0Nq6J9C5hP9vK/Q==",
+      "license": "MIT",
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
+    "node_modules/postgres-interval": {
+      "version": "1.2.0",
+      "resolved": "https://registry.npmjs.org/postgres-interval/-/postgres-interval-1.2.0.tgz",
+      "integrity": "sha512-9ZhXKM/rw350N1ovuWHbGxnGh/SNJ4cnxHiM0rxE4VN41wsg8P8zWn9hv/buK00RP4WvlOyr/RBDiptyxVbkZQ==",
+      "license": "MIT",
+      "dependencies": {
+        "xtend": "^4.0.0"
+      },
+      "engines": {
+        "node": ">=0.10.0"
+      }
+    },
     "node_modules/process-nextick-args": {
       "version": "2.0.1",
       "resolved": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-2.0.1.tgz",
@@ -2544,6 +3074,22 @@
         "url": "https://github.com/sponsors/ljharb"
       }
     },
+    "node_modules/rimraf": {
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/rimraf/-/rimraf-3.0.2.tgz",
+      "integrity": "sha512-JZkJMZkAGFFPP2YqXZXPbMlMBgsxzE8ILs4lMIX/2o0L9UBw9O/Y3o6wFw/i9YLapcUJWwqbi3kdxIPdC62TIA==",
+      "deprecated": "Rimraf versions prior to v4 are no longer supported",
+      "license": "ISC",
+      "dependencies": {
+        "glob": "^7.1.3"
+      },
+      "bin": {
+        "rimraf": "bin.js"
+      },
+      "funding": {
+        "url": "https://github.com/sponsors/isaacs"
+      }
+    },
     "node_modules/run-series": {
       "version": "1.1.9",
       "resolved": "https://registry.npmjs.org/run-series/-/run-series-1.1.9.tgz",
@@ -2667,6 +3213,12 @@
         "node": ">= 0.8.0"
       }
     },
+    "node_modules/set-blocking": {
+      "version": "2.0.0",
+      "resolved": "https://registry.npmjs.org/set-blocking/-/set-blocking-2.0.0.tgz",
+      "integrity": "sha512-KiKBS8AnWGEyLzofFfmvKwpdPzqiy16LvQfK3yv/fVH7Bj13/wl3JSR1J+rfgRE9q7xUJK4qvgS8raSOeLUehw==",
+      "license": "ISC"
+    },
     "node_modules/setprototypeof": {
       "version": "1.2.0",
       "resolved": "https://registry.npmjs.org/setprototypeof/-/setprototypeof-1.2.0.tgz",
@@ -2850,6 +3402,15 @@
         "source-map": "^0.6.0"
       }
     },
+    "node_modules/split2": {
+      "version": "4.2.0",
+      "resolved": "https://registry.npmjs.org/split2/-/split2-4.2.0.tgz",
+      "integrity": "sha512-UcjcJOWknrNkF6PLX83qcHM6KHgVKNkV62Y8a5uYDVv9ydGQVwAHMKqHdJje1VTWpljG0WYpCDhrCdAOYH4TWg==",
+      "license": "ISC",
+      "engines": {
+        "node": ">= 10.x"
+      }
+    },
     "node_modules/sprintf-js": {
       "version": "1.1.2",
       "resolved": "https://registry.npmjs.org/sprintf-js/-/sprintf-js-1.1.2.tgz",
@@ -2914,6 +3475,32 @@
       "integrity": "sha512-Gd2UZBJDkXlY7GbJxfsE8/nvKkUEU1G38c1siN6QP6a9PT9MmHB8GnpscSmMJSoF8LOIrt8ud/wPtojys4G6+g==",
       "license": "MIT"
     },
+    "node_modules/string-width": {
+      "version": "4.2.3",
+      "resolved": "https://registry.npmjs.org/string-width/-/string-width-4.2.3.tgz",
+      "integrity": "sha512-wKyQRQpjJ0sIp62ErSZdGsjMJWsap5oRNihHhu6G7JVO/9jIB6UyevL+tXuOqrng8j/cxKTWyWUwvSTriiZz/g==",
+      "license": "MIT",
+      "dependencies": {
+        "emoji-regex": "^8.0.0",
+        "is-fullwidth-code-point": "^3.0.0",
+        "strip-ansi": "^6.0.1"
+      },
+      "engines": {
+        "node": ">=8"
+      }
+    },
+    "node_modules/strip-ansi": {
+      "version": "6.0.1",
+      "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-6.0.1.tgz",
+      "integrity": "sha512-Y38VPSHcqkFrCpFnQ9vuSXmquuv5oXOKpGeT6aGrr3o3Gc9AlVa6JBfUSOCnbxGGZF+/0ooI7KrPuUSztUdU5A==",
+      "license": "MIT",
+      "dependencies": {
+        "ansi-regex": "^5.0.1"
+      },
+      "engines": {
+        "node": ">=8"
+      }
+    },
     "node_modules/supports-color": {
       "version": "7.2.0",
       "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.2.0.tgz",
@@ -2965,6 +3552,23 @@
         "url": "https://www.buymeacoffee.com/systeminfo"
       }
     },
+    "node_modules/tar": {
+      "version": "6.2.1",
+      "resolved": "https://registry.npmjs.org/tar/-/tar-6.2.1.tgz",
+      "integrity": "sha512-DZ4yORTwrbTj/7MZYq2w+/ZFdI6OZ/f9SFHR+71gIVUZhOQPHzVCLpvRnPgyaMpfWxxk/4ONva3GQSyNIKRv6A==",
+      "license": "ISC",
+      "dependencies": {
+        "chownr": "^2.0.0",
+        "fs-minipass": "^2.0.0",
+        "minipass": "^5.0.0",
+        "minizlib": "^2.1.1",
+        "mkdirp": "^1.0.3",
+        "yallist": "^4.0.0"
+      },
+      "engines": {
+        "node": ">=10"
+      }
+    },
     "node_modules/to-regex-range": {
       "version": "5.0.1",
       "resolved": "https://registry.npmjs.org/to-regex-range/-/to-regex-range-5.0.1.tgz",
@@ -2996,6 +3600,12 @@
         "nodetouch": "bin/nodetouch.js"
       }
     },
+    "node_modules/tr46": {
+      "version": "0.0.3",
+      "resolved": "https://registry.npmjs.org/tr46/-/tr46-0.0.3.tgz",
+      "integrity": "sha512-N3WMsuqV66lT30CrXNbEjx4GEwlow3v6rr4mCcv6prnfwhS01rkgyFdjPNBYd9br7LpXV1+Emh01fHnq2Gdgrw==",
+      "license": "MIT"
+    },
     "node_modules/tslib": {
       "version": "1.9.3",
       "resolved": "https://registry.npmjs.org/tslib/-/tslib-1.9.3.tgz",
@@ -3132,6 +3742,37 @@
         "lodash": "^4.17.14"
       }
     },
+    "node_modules/webidl-conversions": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/webidl-conversions/-/webidl-conversions-3.0.1.tgz",
+      "integrity": "sha512-2JAn3z8AR6rjK8Sm8orRC0h/bcl/DqL7tRPdGZ4I1CjdF+EaMLmYxBHyXuKL849eucPFhvBoxMsflfOb8kxaeQ==",
+      "license": "BSD-2-Clause"
+    },
+    "node_modules/whatwg-url": {
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/whatwg-url/-/whatwg-url-5.0.0.tgz",
+      "integrity": "sha512-saE57nupxk6v3HY35+jzBwYa0rKSy0XR8JSxZPwgLr7ys0IBzhGviA1/TUGJLmSVqs8pb9AnvICXEuOHLprYTw==",
+      "license": "MIT",
+      "dependencies": {
+        "tr46": "~0.0.3",
+        "webidl-conversions": "^3.0.0"
+      }
+    },
+    "node_modules/wide-align": {
+      "version": "1.1.5",
+      "resolved": "https://registry.npmjs.org/wide-align/-/wide-align-1.1.5.tgz",
+      "integrity": "sha512-eDMORYaPNZ4sQIuuYPDHdQvf4gyCF9rEEV/yPxGfwPkRodwEgiMUUXTx/dex+Me0wxx53S+NgUHaP7y3MGlDmg==",
+      "license": "ISC",
+      "dependencies": {
+        "string-width": "^1.0.2 || 2 || 3 || 4"
+      }
+    },
+    "node_modules/wrappy": {
+      "version": "1.0.2",
+      "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+      "integrity": "sha512-l4Sp/DRseor9wL6EvV2+TuQn63dMkPjZ/sp9XkghTEbV9KlPS1xUsZ3u7/IQO4wxtcFB4bgpQPRcR3QCvezPcQ==",
+      "license": "ISC"
+    },
     "node_modules/ws": {
       "version": "7.5.10",
       "resolved": "https://registry.npmjs.org/ws/-/ws-7.5.10.tgz",

inventory-server/package.json

@@ -18,12 +18,14 @@
   "author": "",
   "license": "ISC",
   "dependencies": {
+    "bcrypt": "^5.1.1",
     "cors": "^2.8.5",
     "csv-parse": "^5.6.0",
     "dotenv": "^16.4.7",
     "express": "^4.18.2",
     "multer": "^1.4.5-lts.1",
     "mysql2": "^3.12.0",
+    "pg": "^8.13.2",
     "pm2": "^5.3.0",
     "ssh2": "^1.16.0",
     "uuid": "^9.0.1"

inventory-server/scripts/add-user.js

@@ -0,0 +1,79 @@
+const { Client } = require('pg');
+const bcrypt = require('bcrypt');
+const path = require('path');
+const readline = require('readline');
+require('dotenv').config({ path: path.resolve(__dirname, '../.env') });
+
+const SALT_ROUNDS = 10;
+
+const dbConfig = {
+    host: process.env.DB_HOST,
+    user: process.env.DB_USER,
+    password: process.env.DB_PASSWORD,
+    database: process.env.DB_NAME,
+    port: process.env.DB_PORT || 5432
+};
+
+function prompt(question) {
+    const rl = readline.createInterface({
+        input: process.stdin,
+        output: process.stdout
+    });
+
+    return new Promise(resolve => {
+        rl.question(question, answer => {
+            rl.close();
+            resolve(answer);
+        });
+    });
+}
+
+async function addUser() {
+    try {
+        const username = await prompt('Enter username: ');
+        if (!username.trim()) {
+            console.error('Error: Username cannot be empty');
+            process.exit(1);
+        }
+
+        const password = await prompt('Enter password: ');
+        if (!password.trim()) {
+            console.error('Error: Password cannot be empty');
+            process.exit(1);
+        }
+
+        const client = new Client(dbConfig);
+        await client.connect();
+        
+        // Check if user exists
+        const checkUser = await client.query(
+            'SELECT username FROM users WHERE username = $1',
+            [username]
+        );
+        
+        if (checkUser.rows.length > 0) {
+            console.error('Error: Username already exists');
+            process.exit(1);
+        }
+
+        // Hash password
+        const hashedPassword = await bcrypt.hash(password, SALT_ROUNDS);
+        
+        // Insert new user
+        await client.query(
+            'INSERT INTO users (username, password) VALUES ($1, $2)',
+            [username, hashedPassword]
+        );
+        
+        console.log(`User '${username}' created successfully`);
+        await client.end();
+    } catch (error) {
+        console.error('Error creating user:', error.message);
+        process.exit(1);
+    }
+}
+
+// Run if called directly
+if (require.main === module) {
+    addUser();
+} 

inventory-server/scripts/calculate-metrics.js

@@ -7,13 +7,13 @@ require('dotenv').config({ path: path.resolve(__dirname, '..', '.env') });
 
 // Configuration flags for controlling which metrics to calculate
 // Set to 1 to skip the corresponding calculation, 0 to run it
-const SKIP_PRODUCT_METRICS = 1;          // Skip all product metrics
-const SKIP_TIME_AGGREGATES = 1;          // Skip time aggregates
-const SKIP_FINANCIAL_METRICS = 1;        // Skip financial metrics
-const SKIP_VENDOR_METRICS = 1;           // Skip vendor metrics
-const SKIP_CATEGORY_METRICS = 1;         // Skip category metrics
-const SKIP_BRAND_METRICS = 1;            // Skip brand metrics
-const SKIP_SALES_FORECASTS = 1;          // Skip sales forecasts
+const SKIP_PRODUCT_METRICS = 0;
+const SKIP_TIME_AGGREGATES = 0;
+const SKIP_FINANCIAL_METRICS = 0;
+const SKIP_VENDOR_METRICS = 0;
+const SKIP_CATEGORY_METRICS = 0;
+const SKIP_BRAND_METRICS = 0;
+const SKIP_SALES_FORECASTS = 0;
 
 // Add error handler for uncaught exceptions
 process.on('uncaughtException', (error) => {
@@ -44,6 +44,34 @@ global.clearProgress = progress.clearProgress;
 global.getProgress = progress.getProgress;
 global.logError = progress.logError;
 
+// List of temporary tables used in the calculation process
+const TEMP_TABLES = [
+    'temp_revenue_ranks',
+    'temp_sales_metrics',
+    'temp_purchase_metrics',
+    'temp_product_metrics',
+    'temp_vendor_metrics',
+    'temp_category_metrics',
+    'temp_brand_metrics',
+    'temp_forecast_dates',
+    'temp_daily_sales',
+    'temp_product_stats',
+    'temp_category_sales',
+    'temp_category_stats'
+];
+
+// Add cleanup function for temporary tables
+async function cleanupTemporaryTables(connection) {
+    try {
+        for (const table of TEMP_TABLES) {
+            await connection.query(`DROP TEMPORARY TABLE IF EXISTS ${table}`);
+        }
+    } catch (error) {
+        logError(error, 'Error cleaning up temporary tables');
+        throw error; // Re-throw to be handled by the caller
+    }
+}
+
 const { getConnection, closePool } = require('./metrics/utils/db');
 const calculateProductMetrics = require('./metrics/product-metrics');
 const calculateTimeAggregates = require('./metrics/time-aggregates');
@@ -83,10 +111,78 @@ process.on('SIGTERM', cancelCalculation);
 async function calculateMetrics() {
     let connection;
     const startTime = Date.now();
-    let processedCount = 0;
+    let processedProducts = 0;
+    let processedOrders = 0;
+    let processedPurchaseOrders = 0;
     let totalProducts = 0;
+    let totalOrders = 0;
+    let totalPurchaseOrders = 0;
+    let calculateHistoryId;
     
     try {
+        // Clean up any previously running calculations
+        connection = await getConnection();
+        await connection.query(`
+            UPDATE calculate_history 
+            SET 
+                status = 'cancelled',
+                end_time = NOW(),
+                duration_seconds = TIMESTAMPDIFF(SECOND, start_time, NOW()),
+                error_message = 'Previous calculation was not completed properly'
+            WHERE status = 'running'
+        `);
+
+        // Get counts from all relevant tables
+        const [[productCount], [orderCount], [poCount]] = await Promise.all([
+            connection.query('SELECT COUNT(*) as total FROM products'),
+            connection.query('SELECT COUNT(*) as total FROM orders'),
+            connection.query('SELECT COUNT(*) as total FROM purchase_orders')
+        ]);
+
+        totalProducts = productCount.total;
+        totalOrders = orderCount.total;
+        totalPurchaseOrders = poCount.total;
+
+        // Create history record for this calculation
+        const [historyResult] = await connection.query(`
+            INSERT INTO calculate_history (
+                start_time,
+                status,
+                total_products,
+                total_orders,
+                total_purchase_orders,
+                additional_info
+            ) VALUES (
+                NOW(),
+                'running',
+                ?,
+                ?,
+                ?,
+                JSON_OBJECT(
+                    'skip_product_metrics', ?,
+                    'skip_time_aggregates', ?,
+                    'skip_financial_metrics', ?,
+                    'skip_vendor_metrics', ?,
+                    'skip_category_metrics', ?,
+                    'skip_brand_metrics', ?,
+                    'skip_sales_forecasts', ?
+                )
+            )
+        `, [
+            totalProducts,
+            totalOrders,
+            totalPurchaseOrders,
+            SKIP_PRODUCT_METRICS,
+            SKIP_TIME_AGGREGATES,
+            SKIP_FINANCIAL_METRICS, 
+            SKIP_VENDOR_METRICS,
+            SKIP_CATEGORY_METRICS,
+            SKIP_BRAND_METRICS,
+            SKIP_SALES_FORECASTS
+        ]);
+        calculateHistoryId = historyResult.insertId;
+        connection.release();
+
         // Add debug logging for the progress functions
         console.log('Debug - Progress functions:', {
             formatElapsedTime: typeof global.formatElapsedTime,
@@ -115,72 +211,150 @@ async function calculateMetrics() {
                 elapsed: '0s',
                 remaining: 'Calculating...',
                 rate: 0,
-                percentage: '0'
+                percentage: '0',
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
+            });
+
+            // Update progress periodically
+            const updateProgress = async (products = null, orders = null, purchaseOrders = null) => {
+                // Ensure all values are valid numbers or default to previous value
+                if (products !== null) processedProducts = Number(products) || processedProducts || 0;
+                if (orders !== null) processedOrders = Number(orders) || processedOrders || 0;
+                if (purchaseOrders !== null) processedPurchaseOrders = Number(purchaseOrders) || processedPurchaseOrders || 0;
+
+                // Ensure we never send NaN to the database
+                const safeProducts = Number(processedProducts) || 0;
+                const safeOrders = Number(processedOrders) || 0;
+                const safePurchaseOrders = Number(processedPurchaseOrders) || 0;
+
+                await connection.query(`
+                    UPDATE calculate_history 
+                    SET 
+                        processed_products = ?,
+                        processed_orders = ?,
+                        processed_purchase_orders = ?
+                    WHERE id = ?
+                `, [safeProducts, safeOrders, safePurchaseOrders, calculateHistoryId]);
+            };
+
+            // Helper function to ensure valid progress numbers
+            const ensureValidProgress = (current, total) => ({
+                current: Number(current) || 0,
+                total: Number(total) || 1,  // Default to 1 to avoid division by zero
+                percentage: (((Number(current) || 0) / (Number(total) || 1)) * 100).toFixed(1)
+            });
+
+            // Initial progress
+            const initialProgress = ensureValidProgress(0, totalProducts);
+            global.outputProgress({
+                status: 'running',
+                operation: 'Starting metrics calculation',
+                current: initialProgress.current,
+                total: initialProgress.total,
+                elapsed: '0s',
+                remaining: 'Calculating...',
+                rate: 0,
+                percentage: initialProgress.percentage,
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
 
-            // Get total number of products
-            const [countResult] = await connection.query('SELECT COUNT(*) as total FROM products')
-                .catch(err => {
-                    global.logError(err, 'Failed to count products');
-                    throw err;
-                });
-            totalProducts = countResult[0].total;
-            
             if (!SKIP_PRODUCT_METRICS) {
-                processedCount = await calculateProductMetrics(startTime, totalProducts);
+                const result = await calculateProductMetrics(startTime, totalProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Product metrics calculation failed');
+                }
             } else {
                 console.log('Skipping product metrics calculation...');
-                processedCount = Math.floor(totalProducts * 0.6);
+                processedProducts = Math.floor(totalProducts * 0.6);
+                await updateProgress(processedProducts);
                 global.outputProgress({
                     status: 'running',
                     operation: 'Skipping product metrics calculation',
-                    current: processedCount,
+                    current: processedProducts,
                     total: totalProducts,
                     elapsed: global.formatElapsedTime(startTime),
-                    remaining: global.estimateRemaining(startTime, processedCount, totalProducts),
-                    rate: global.calculateRate(startTime, processedCount),
-                    percentage: '60'
+                    remaining: global.estimateRemaining(startTime, processedProducts, totalProducts),
+                    rate: global.calculateRate(startTime, processedProducts),
+                    percentage: '60',
+                    timing: {
+                        start_time: new Date(startTime).toISOString(),
+                        end_time: new Date().toISOString(),
+                        elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                    }
                 });
             }
 
             // Calculate time-based aggregates
             if (!SKIP_TIME_AGGREGATES) {
-                processedCount = await calculateTimeAggregates(startTime, totalProducts, processedCount);
+                const result = await calculateTimeAggregates(startTime, totalProducts, processedProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Time aggregates calculation failed');
+                }
             } else {
                 console.log('Skipping time aggregates calculation');
             }
 
             // Calculate financial metrics
             if (!SKIP_FINANCIAL_METRICS) {
-                processedCount = await calculateFinancialMetrics(startTime, totalProducts, processedCount);
+                const result = await calculateFinancialMetrics(startTime, totalProducts, processedProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Financial metrics calculation failed');
+                }
             } else {
                 console.log('Skipping financial metrics calculation');
             }
             
             // Calculate vendor metrics
             if (!SKIP_VENDOR_METRICS) {
-                processedCount = await calculateVendorMetrics(startTime, totalProducts, processedCount);
+                const result = await calculateVendorMetrics(startTime, totalProducts, processedProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Vendor metrics calculation failed');
+                }
             } else {
                 console.log('Skipping vendor metrics calculation');
             }
 
             // Calculate category metrics
             if (!SKIP_CATEGORY_METRICS) {
-                processedCount = await calculateCategoryMetrics(startTime, totalProducts, processedCount);
+                const result = await calculateCategoryMetrics(startTime, totalProducts, processedProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Category metrics calculation failed');
+                }
             } else {
                 console.log('Skipping category metrics calculation');
             }
 
             // Calculate brand metrics
             if (!SKIP_BRAND_METRICS) {
-                processedCount = await calculateBrandMetrics(startTime, totalProducts, processedCount);
+                const result = await calculateBrandMetrics(startTime, totalProducts, processedProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Brand metrics calculation failed');
+                }
             } else {
                 console.log('Skipping brand metrics calculation');
             }
 
             // Calculate sales forecasts
             if (!SKIP_SALES_FORECASTS) {
-                processedCount = await calculateSalesForecasts(startTime, totalProducts, processedCount);
+                const result = await calculateSalesForecasts(startTime, totalProducts, processedProducts);
+                await updateProgress(result.processedProducts, result.processedOrders, result.processedPurchaseOrders);
+                if (!result.success) {
+                    throw new Error('Sales forecasts calculation failed');
+                }
             } else {
                 console.log('Skipping sales forecasts calculation');
             }
@@ -189,15 +363,25 @@ async function calculateMetrics() {
             outputProgress({
                 status: 'running',
                 operation: 'Starting ABC classification',
-                current: processedCount,
-                total: totalProducts,
+                current: processedProducts || 0,
+                total: totalProducts || 0,
                 elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                remaining: estimateRemaining(startTime, processedProducts || 0, totalProducts || 0),
+                rate: calculateRate(startTime, processedProducts || 0),
+                percentage: (((processedProducts || 0) / (totalProducts || 1)) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
 
-            if (isCancelled) return processedCount;
+            if (isCancelled) return {
+                processedProducts: processedProducts || 0,
+                processedOrders: processedOrders || 0,
+                processedPurchaseOrders: 0,
+                success: false
+            };
 
             const [abcConfig] = await connection.query('SELECT a_threshold, b_threshold FROM abc_classification_config WHERE id = 1');
             const abcThresholds = abcConfig[0] || { a_threshold: 20, b_threshold: 50 };
@@ -218,15 +402,25 @@ async function calculateMetrics() {
             outputProgress({
                 status: 'running',
                 operation: 'Creating revenue rankings',
-                current: processedCount,
-                total: totalProducts,
+                current: processedProducts || 0,
+                total: totalProducts || 0,
                 elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                remaining: estimateRemaining(startTime, processedProducts || 0, totalProducts || 0),
+                rate: calculateRate(startTime, processedProducts || 0),
+                percentage: (((processedProducts || 0) / (totalProducts || 1)) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
 
-            if (isCancelled) return processedCount;
+            if (isCancelled) return {
+                processedProducts: processedProducts || 0,
+                processedOrders: processedOrders || 0,
+                processedPurchaseOrders: 0,
+                success: false
+            };
 
             await connection.query(`
                 INSERT INTO temp_revenue_ranks
@@ -247,26 +441,44 @@ async function calculateMetrics() {
             // Get total count for percentage calculation
             const [rankingCount] = await connection.query('SELECT MAX(rank_num) as total_count FROM temp_revenue_ranks');
             const totalCount = rankingCount[0].total_count || 1;
+            const max_rank = totalCount; // Store max_rank for use in classification
 
             outputProgress({
                 status: 'running',
                 operation: 'Updating ABC classifications',
-                current: processedCount,
-                total: totalProducts,
+                current: processedProducts || 0,
+                total: totalProducts || 0,
                 elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                remaining: estimateRemaining(startTime, processedProducts || 0, totalProducts || 0),
+                rate: calculateRate(startTime, processedProducts || 0),
+                percentage: (((processedProducts || 0) / (totalProducts || 1)) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
 
-            if (isCancelled) return processedCount;
+            if (isCancelled) return {
+                processedProducts: processedProducts || 0,
+                processedOrders: processedOrders || 0,
+                processedPurchaseOrders: 0,
+                success: false
+            };
 
-            // Process updates in batches
+            // ABC classification progress tracking
             let abcProcessedCount = 0;
             const batchSize = 5000;
+            let lastProgressUpdate = Date.now();
+            const progressUpdateInterval = 1000; // Update every second
 
             while (true) {
-                if (isCancelled) return processedCount;
+                if (isCancelled) return {
+                    processedProducts: Number(processedProducts) || 0,
+                    processedOrders: Number(processedOrders) || 0,
+                    processedPurchaseOrders: 0,
+                    success: false
+                };
 
                 // First get a batch of PIDs that need updating
                 const [pids] = await connection.query(`
@@ -282,8 +494,8 @@ async function calculateMetrics() {
                             ELSE 'C'
                         END
                     LIMIT ?
-                `, [totalCount, abcThresholds.a_threshold,
-                    totalCount, abcThresholds.b_threshold,
+                `, [max_rank, abcThresholds.a_threshold,
+                    max_rank, abcThresholds.b_threshold,
                     batchSize]);
 
                 if (pids.length === 0) {
@@ -303,23 +515,42 @@ async function calculateMetrics() {
                         END,
                         pm.last_calculated_at = NOW()
                     WHERE pm.pid IN (?)
-                `, [totalCount, abcThresholds.a_threshold,
-                    totalCount, abcThresholds.b_threshold,
+                `, [max_rank, abcThresholds.a_threshold,
+                    max_rank, abcThresholds.b_threshold,
                     pids.map(row => row.pid)]);
 
                 abcProcessedCount += result.affectedRows;
-                processedCount = Math.floor(totalProducts * (0.99 + (abcProcessedCount / totalCount) * 0.01));
+                
+                // Calculate progress ensuring valid numbers
+                const currentProgress = Math.floor(totalProducts * (0.99 + (abcProcessedCount / (totalCount || 1)) * 0.01));
+                processedProducts = Number(currentProgress) || processedProducts || 0;
 
-                outputProgress({
-                    status: 'running',
-                    operation: 'ABC classification progress',
-                    current: processedCount,
-                    total: totalProducts,
-                    elapsed: formatElapsedTime(startTime),
-                    remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                    rate: calculateRate(startTime, processedCount),
-                    percentage: ((processedCount / totalProducts) * 100).toFixed(1)
-                });
+                // Only update progress at most once per second
+                const now = Date.now();
+                if (now - lastProgressUpdate >= progressUpdateInterval) {
+                    const progress = ensureValidProgress(processedProducts, totalProducts);
+                    
+                    outputProgress({
+                        status: 'running',
+                        operation: 'ABC classification progress',
+                        current: progress.current,
+                        total: progress.total,
+                        elapsed: formatElapsedTime(startTime),
+                        remaining: estimateRemaining(startTime, progress.current, progress.total),
+                        rate: calculateRate(startTime, progress.current),
+                        percentage: progress.percentage,
+                        timing: {
+                            start_time: new Date(startTime).toISOString(),
+                            end_time: new Date().toISOString(),
+                            elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                        }
+                    });
+                    
+                    lastProgressUpdate = now;
+                }
+
+                // Update database progress
+                await updateProgress(processedProducts, processedOrders, processedPurchaseOrders);
 
                 // Small delay between batches to allow other transactions
                 await new Promise(resolve => setTimeout(resolve, 100));
@@ -328,61 +559,145 @@ async function calculateMetrics() {
             // Clean up
             await connection.query('DROP TEMPORARY TABLE IF EXISTS temp_revenue_ranks');
 
+            const endTime = Date.now();
+            const totalElapsedSeconds = Math.round((endTime - startTime) / 1000);
+
+            // Update calculate_status for ABC classification
+            await connection.query(`
+                INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+                VALUES ('abc_classification', NOW())
+                ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+            `);
+
+            // Final progress update with guaranteed valid numbers
+            const finalProgress = ensureValidProgress(totalProducts, totalProducts);
+            
             // Final success message
             outputProgress({
                 status: 'complete',
                 operation: 'Metrics calculation complete',
-                current: totalProducts,
-                total: totalProducts,
+                current: finalProgress.current,
+                total: finalProgress.total,
                 elapsed: formatElapsedTime(startTime),
                 remaining: '0s',
-                rate: calculateRate(startTime, totalProducts),
-                percentage: '100'
+                rate: calculateRate(startTime, finalProgress.current),
+                percentage: '100',
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: totalElapsedSeconds
+                }
             });
 
+            // Ensure all values are valid numbers before final update
+            const finalStats = {
+                processedProducts: Number(processedProducts) || 0,
+                processedOrders: Number(processedOrders) || 0,
+                processedPurchaseOrders: Number(processedPurchaseOrders) || 0
+            };
+
+            // Update history with completion
+            await connection.query(`
+                UPDATE calculate_history 
+                SET 
+                    end_time = NOW(),
+                    duration_seconds = ?,
+                    processed_products = ?,
+                    processed_orders = ?,
+                    processed_purchase_orders = ?,
+                    status = 'completed'
+                WHERE id = ?
+            `, [totalElapsedSeconds, 
+                finalStats.processedProducts,
+                finalStats.processedOrders, 
+                finalStats.processedPurchaseOrders,
+                calculateHistoryId]);
+
             // Clear progress file on successful completion
             global.clearProgress();
 
         } catch (error) {
+            const endTime = Date.now();
+            const totalElapsedSeconds = Math.round((endTime - startTime) / 1000);
+
+            // Update history with error
+            await connection.query(`
+                UPDATE calculate_history 
+                SET 
+                    end_time = NOW(),
+                    duration_seconds = ?,
+                    processed_products = ?,
+                    processed_orders = ?,
+                    processed_purchase_orders = ?,
+                    status = ?,
+                    error_message = ?
+                WHERE id = ?
+            `, [
+                totalElapsedSeconds,
+                processedProducts || 0,  // Ensure we have a valid number
+                processedOrders || 0,    // Ensure we have a valid number
+                processedPurchaseOrders || 0,  // Ensure we have a valid number
+                isCancelled ? 'cancelled' : 'failed',
+                error.message,
+                calculateHistoryId
+            ]);
+
             if (isCancelled) {
                 global.outputProgress({
                     status: 'cancelled',
                     operation: 'Calculation cancelled',
-                    current: processedCount,
+                    current: processedProducts,
                     total: totalProducts || 0,
                     elapsed: global.formatElapsedTime(startTime),
                     remaining: null,
-                    rate: global.calculateRate(startTime, processedCount),
-                    percentage: ((processedCount / (totalProducts || 1)) * 100).toFixed(1)
+                    rate: global.calculateRate(startTime, processedProducts),
+                    percentage: ((processedProducts / (totalProducts || 1)) * 100).toFixed(1),
+                    timing: {
+                        start_time: new Date(startTime).toISOString(),
+                        end_time: new Date().toISOString(),
+                        elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                    }
                 });
             } else {
                 global.outputProgress({
                     status: 'error',
                     operation: 'Error: ' + error.message,
-                    current: processedCount,
+                    current: processedProducts,
                     total: totalProducts || 0,
                     elapsed: global.formatElapsedTime(startTime),
                     remaining: null,
-                    rate: global.calculateRate(startTime, processedCount),
-                    percentage: ((processedCount / (totalProducts || 1)) * 100).toFixed(1)
+                    rate: global.calculateRate(startTime, processedProducts),
+                    percentage: ((processedProducts / (totalProducts || 1)) * 100).toFixed(1),
+                    timing: {
+                        start_time: new Date(startTime).toISOString(),
+                        end_time: new Date().toISOString(),
+                        elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                    }
                 });
             }
             throw error;
         } finally {
             if (connection) {
-            connection.release();
+                // Ensure temporary tables are cleaned up
+                await cleanupTemporaryTables(connection);
+                connection.release();
             }
+            // Close the connection pool when we're done
+            await closePool();
         }
-    } finally {
-        // Close the connection pool when we're done
-        await closePool();
+    } catch (error) {
+        success = false;
+        logError(error, 'Error in metrics calculation');
+        throw error;
     }
 }
 
-// Export both functions and progress checker
-module.exports = calculateMetrics;
-module.exports.cancelCalculation = cancelCalculation;
-module.exports.getProgress = global.getProgress;
+// Export as a module with all necessary functions
+module.exports = {
+    calculateMetrics,
+    cancelCalculation,
+    getProgress: global.getProgress
+};
 
 // Run directly if called from command line
 if (require.main === module) {

inventory-server/scripts/full-reset.js

@@ -0,0 +1,115 @@
+const path = require('path');
+const { spawn } = require('child_process');
+
+function outputProgress(data) {
+    if (!data.status) {
+        data = {
+            status: 'running',
+            ...data
+        };
+    }
+    console.log(JSON.stringify(data));
+}
+
+function runScript(scriptPath) {
+    return new Promise((resolve, reject) => {
+        const child = spawn('node', [scriptPath], {
+            stdio: ['inherit', 'pipe', 'pipe'],
+            env: {
+                ...process.env,
+                PGHOST: process.env.DB_HOST,
+                PGUSER: process.env.DB_USER,
+                PGPASSWORD: process.env.DB_PASSWORD,
+                PGDATABASE: process.env.DB_NAME,
+                PGPORT: process.env.DB_PORT || '5432'
+            }
+        });
+
+        let output = '';
+
+        child.stdout.on('data', (data) => {
+            const lines = data.toString().split('\n');
+            lines.filter(line => line.trim()).forEach(line => {
+                try {
+                    console.log(line); // Pass through the JSON output
+                    output += line + '\n';
+                } catch (e) {
+                    console.log(line); // If not JSON, just log it directly
+                }
+            });
+        });
+
+        child.stderr.on('data', (data) => {
+            console.error(data.toString());
+        });
+
+        child.on('close', (code) => {
+            if (code !== 0) {
+                reject(new Error(`Script ${scriptPath} exited with code ${code}`));
+            } else {
+                resolve(output);
+            }
+        });
+
+        child.on('error', (err) => {
+            reject(err);
+        });
+    });
+}
+
+async function fullReset() {
+    try {
+        // Step 1: Reset Database
+        outputProgress({
+            operation: 'Starting full reset',
+            message: 'Step 1/3: Resetting database...'
+        });
+        await runScript(path.join(__dirname, 'reset-db.js'));
+        outputProgress({
+            status: 'complete',
+            operation: 'Database reset step complete',
+            message: 'Database reset finished, moving to import...'
+        });
+
+        // Step 2: Import from Production
+        outputProgress({
+            operation: 'Starting import',
+            message: 'Step 2/3: Importing from production...'
+        });
+        await runScript(path.join(__dirname, 'import-from-prod.js'));
+        outputProgress({
+            status: 'complete',
+            operation: 'Import step complete',
+            message: 'Import finished, moving to metrics calculation...'
+        });
+
+        // Step 3: Calculate Metrics
+        outputProgress({
+            operation: 'Starting metrics calculation',
+            message: 'Step 3/3: Calculating metrics...'
+        });
+        await runScript(path.join(__dirname, 'calculate-metrics.js'));
+        
+        // Final completion message
+        outputProgress({
+            status: 'complete',
+            operation: 'Full reset complete',
+            message: 'Successfully completed all steps: database reset, import, and metrics calculation'
+        });
+    } catch (error) {
+        outputProgress({
+            status: 'error',
+            operation: 'Full reset failed',
+            error: error.message,
+            stack: error.stack
+        });
+        process.exit(1);
+    }
+}
+
+// Run if called directly
+if (require.main === module) {
+    fullReset();
+}
+
+module.exports = fullReset; 

inventory-server/scripts/full-update.js

@@ -0,0 +1,100 @@
+const path = require('path');
+const { spawn } = require('child_process');
+
+function outputProgress(data) {
+    if (!data.status) {
+        data = {
+            status: 'running',
+            ...data
+        };
+    }
+    console.log(JSON.stringify(data));
+}
+
+function runScript(scriptPath) {
+    return new Promise((resolve, reject) => {
+        const child = spawn('node', [scriptPath], {
+            stdio: ['inherit', 'pipe', 'pipe']
+        });
+
+        let output = '';
+
+        child.stdout.on('data', (data) => {
+            const lines = data.toString().split('\n');
+            lines.filter(line => line.trim()).forEach(line => {
+                try {
+                    console.log(line); // Pass through the JSON output
+                    output += line + '\n';
+                } catch (e) {
+                    console.log(line); // If not JSON, just log it directly
+                }
+            });
+        });
+
+        child.stderr.on('data', (data) => {
+            console.error(data.toString());
+        });
+
+        child.on('close', (code) => {
+            if (code !== 0) {
+                reject(new Error(`Script ${scriptPath} exited with code ${code}`));
+            } else {
+                resolve(output);
+            }
+        });
+
+        child.on('error', (err) => {
+            reject(err);
+        });
+    });
+}
+
+async function fullUpdate() {
+    try {
+        // Step 1: Import from Production
+        outputProgress({
+            operation: 'Starting full update',
+            message: 'Step 1/2: Importing from production...'
+        });
+        await runScript(path.join(__dirname, 'import-from-prod.js'));
+        outputProgress({
+            status: 'complete',
+            operation: 'Import step complete',
+            message: 'Import finished, moving to metrics calculation...'
+        });
+
+        // Step 2: Calculate Metrics
+        outputProgress({
+            operation: 'Starting metrics calculation',
+            message: 'Step 2/2: Calculating metrics...'
+        });
+        await runScript(path.join(__dirname, 'calculate-metrics.js'));
+        outputProgress({
+            status: 'complete',
+            operation: 'Metrics step complete',
+            message: 'Metrics calculation finished'
+        });
+
+        // Final completion message
+        outputProgress({
+            status: 'complete',
+            operation: 'Full update complete',
+            message: 'Successfully completed all steps: import and metrics calculation'
+        });
+    } catch (error) {
+        outputProgress({
+            status: 'error',
+            operation: 'Full update failed',
+            error: error.message,
+            stack: error.stack
+        });
+        process.exit(1);
+    }
+}
+
+// Run if called directly
+if (require.main === module) {
+    fullUpdate();
+}
+
+module.exports = fullUpdate; 

inventory-server/scripts/import/orders.js

@@ -28,9 +28,18 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
   let cumulativeProcessedOrders = 0;
 
   try {
-    // Insert temporary table creation queries
+    // Clean up any existing temp tables first
     await localConnection.query(`
-      CREATE TABLE IF NOT EXISTS temp_order_items (
+      DROP TEMPORARY TABLE IF EXISTS temp_order_items;
+      DROP TEMPORARY TABLE IF EXISTS temp_order_meta;
+      DROP TEMPORARY TABLE IF EXISTS temp_order_discounts;
+      DROP TEMPORARY TABLE IF EXISTS temp_order_taxes;
+      DROP TEMPORARY TABLE IF EXISTS temp_order_costs;
+    `);
+
+    // Create all temp tables with correct schema
+    await localConnection.query(`
+      CREATE TEMPORARY TABLE temp_order_items (
         order_id INT UNSIGNED NOT NULL,
         pid INT UNSIGNED NOT NULL,
         SKU VARCHAR(50) NOT NULL,
@@ -40,35 +49,41 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
         PRIMARY KEY (order_id, pid)
       ) ENGINE=InnoDB DEFAULT CHARSET=utf8;
     `);
+
     await localConnection.query(`
-      CREATE TABLE IF NOT EXISTS temp_order_meta (
+      CREATE TEMPORARY TABLE temp_order_meta (
         order_id INT UNSIGNED NOT NULL,
         date DATE NOT NULL,
         customer VARCHAR(100) NOT NULL,
         customer_name VARCHAR(150) NOT NULL,
         status INT,
         canceled TINYINT(1),
+        summary_discount DECIMAL(10,2) DEFAULT 0.00,
+        summary_subtotal DECIMAL(10,2) DEFAULT 0.00,
         PRIMARY KEY (order_id)
       ) ENGINE=InnoDB DEFAULT CHARSET=utf8;
     `);
+
     await localConnection.query(`
-      CREATE TABLE IF NOT EXISTS temp_order_discounts (
+      CREATE TEMPORARY TABLE temp_order_discounts (
         order_id INT UNSIGNED NOT NULL,
         pid INT UNSIGNED NOT NULL,
         discount DECIMAL(10,2) NOT NULL,
         PRIMARY KEY (order_id, pid)
       ) ENGINE=InnoDB DEFAULT CHARSET=utf8;
     `);
+
     await localConnection.query(`
-      CREATE TABLE IF NOT EXISTS temp_order_taxes (
+      CREATE TEMPORARY TABLE temp_order_taxes (
         order_id INT UNSIGNED NOT NULL,
         pid INT UNSIGNED NOT NULL,
         tax DECIMAL(10,2) NOT NULL,
         PRIMARY KEY (order_id, pid)
       ) ENGINE=InnoDB DEFAULT CHARSET=utf8;
     `);
+
     await localConnection.query(`
-      CREATE TABLE IF NOT EXISTS temp_order_costs (
+      CREATE TEMPORARY TABLE temp_order_costs (
         order_id INT UNSIGNED NOT NULL,
         pid INT UNSIGNED NOT NULL,
         costeach DECIMAL(10,3) DEFAULT 0.000,
@@ -81,6 +96,7 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
       SELECT COLUMN_NAME 
       FROM INFORMATION_SCHEMA.COLUMNS 
       WHERE TABLE_NAME = 'orders'
+        AND COLUMN_NAME != 'updated'  -- Exclude the updated column
       ORDER BY ORDINAL_POSITION
     `);
     const columnNames = columns.map(col => col.COLUMN_NAME);
@@ -212,7 +228,9 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
           o.order_cid as customer,
           CONCAT(COALESCE(u.firstname, ''), ' ', COALESCE(u.lastname, '')) as customer_name,
           o.order_status as status,
-          CASE WHEN o.date_cancelled != '0000-00-00 00:00:00' THEN 1 ELSE 0 END as canceled
+          CASE WHEN o.date_cancelled != '0000-00-00 00:00:00' THEN 1 ELSE 0 END as canceled,
+          o.summary_discount,
+          o.summary_subtotal
         FROM _order o
         LEFT JOIN users u ON o.order_cid = u.cid
         WHERE o.order_id IN (?)
@@ -226,19 +244,37 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
         console.log('Found duplicates:', duplicates);
       }
 
-      const placeholders = orders.map(() => "(?, ?, ?, ?, ?, ?)").join(",");
+      const placeholders = orders.map(() => "(?, ?, ?, ?, ?, ?, ?, ?)").join(",");
       const values = orders.flatMap(order => [
-        order.order_id, order.date, order.customer, order.customer_name, order.status, order.canceled
+        order.order_id, 
+        order.date, 
+        order.customer, 
+        order.customer_name, 
+        order.status, 
+        order.canceled,
+        order.summary_discount,
+        order.summary_subtotal
       ]);
 
       await localConnection.query(`
-        INSERT INTO temp_order_meta VALUES ${placeholders}
+        INSERT INTO temp_order_meta (
+          order_id, 
+          date, 
+          customer, 
+          customer_name, 
+          status, 
+          canceled,
+          summary_discount,
+          summary_subtotal
+        ) VALUES ${placeholders}
         ON DUPLICATE KEY UPDATE
           date = VALUES(date),
           customer = VALUES(customer),
           customer_name = VALUES(customer_name),
           status = VALUES(status),
-          canceled = VALUES(canceled)
+          canceled = VALUES(canceled),
+          summary_discount = VALUES(summary_discount),
+          summary_subtotal = VALUES(summary_subtotal)
       `, values);
 
       processedCount = i + orders.length;
@@ -317,14 +353,25 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
     for (let i = 0; i < orderIds.length; i += 5000) {
       const batchIds = orderIds.slice(i, i + 5000);
       const [costs] = await prodConnection.query(`
-        SELECT orderid as order_id, pid, costeach
-        FROM order_costs
-        WHERE orderid IN (?)
+        SELECT 
+          oc.orderid as order_id, 
+          oc.pid,
+          COALESCE(
+            oc.costeach,
+            (SELECT pi.costeach 
+             FROM product_inventory pi 
+             WHERE pi.pid = oc.pid 
+             AND pi.daterec <= o.date_placed
+             ORDER BY pi.daterec DESC LIMIT 1)
+          ) as costeach
+        FROM order_costs oc
+        JOIN _order o ON oc.orderid = o.order_id
+        WHERE oc.orderid IN (?)
       `, [batchIds]);
 
       if (costs.length > 0) {
         const placeholders = costs.map(() => '(?, ?, ?)').join(",");
-        const values = costs.flatMap(c => [c.order_id, c.pid, c.costeach]);
+        const values = costs.flatMap(c => [c.order_id, c.pid, c.costeach || 0]);
         await localConnection.query(`
           INSERT INTO temp_order_costs (order_id, pid, costeach)
           VALUES ${placeholders}
@@ -355,7 +402,13 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
           om.date,
           oi.price,
           oi.quantity,
-          oi.base_discount + COALESCE(od.discount, 0) as discount,
+          oi.base_discount + COALESCE(od.discount, 0) + 
+          CASE 
+            WHEN om.summary_discount > 0 THEN 
+              ROUND((om.summary_discount * (oi.price * oi.quantity)) / 
+                NULLIF(om.summary_subtotal, 0), 2)
+            ELSE 0 
+          END as discount,
           COALESCE(ot.tax, 0) as tax,
           0 as tax_included,
           0 as shipping,
@@ -455,7 +508,13 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
             om.date,
             oi.price,
             oi.quantity,
-            oi.base_discount + COALESCE(od.discount, 0) as discount,
+            oi.base_discount + COALESCE(od.discount, 0) + 
+            CASE 
+              WHEN o.summary_discount > 0 THEN 
+                ROUND((o.summary_discount * (oi.price * oi.quantity)) / 
+                  NULLIF(o.summary_subtotal, 0), 2)
+              ELSE 0 
+            END as discount,
             COALESCE(ot.tax, 0) as tax,
             0 as tax_included,
             0 as shipping,
@@ -466,6 +525,7 @@ async function importOrders(prodConnection, localConnection, incrementalUpdate =
             COALESCE(tc.costeach, 0) as costeach
           FROM temp_order_items oi
           JOIN temp_order_meta om ON oi.order_id = om.order_id
+          LEFT JOIN _order o ON oi.order_id = o.order_id
           LEFT JOIN temp_order_discounts od ON oi.order_id = od.order_id AND oi.pid = od.pid
           LEFT JOIN temp_order_taxes ot ON oi.order_id = ot.order_id AND oi.pid = ot.pid
           LEFT JOIN temp_order_costs tc ON oi.order_id = tc.order_id AND oi.pid = tc.pid

inventory-server/scripts/import/purchase-orders.js

@@ -33,16 +33,15 @@ async function importPurchaseOrders(prodConnection, localConnection, incremental
       status: "running",
     });
 
-    // Get column names for the insert
+    // Get column names first
     const [columns] = await localConnection.query(`
       SELECT COLUMN_NAME 
       FROM INFORMATION_SCHEMA.COLUMNS 
       WHERE TABLE_NAME = 'purchase_orders'
+        AND COLUMN_NAME != 'updated'  -- Exclude the updated column
       ORDER BY ORDINAL_POSITION
     `);
-    const columnNames = columns
-      .map((col) => col.COLUMN_NAME)
-      .filter((name) => name !== "id");
+    const columnNames = columns.map(col => col.COLUMN_NAME);
 
     // Build incremental conditions
     const incrementalWhereClause = incrementalUpdate
@@ -321,41 +320,47 @@ async function importPurchaseOrders(prodConnection, localConnection, incremental
             let lastFulfillmentReceiving = null;
 
             for (const receiving of allReceivings) {
-              const qtyToApply = Math.min(remainingToFulfill, receiving.qty_each);
-              if (qtyToApply > 0) {
-                // If this is the first receiving being applied, use its cost
-                if (actualCost === null) {
-                  actualCost = receiving.cost_each;
-                  firstFulfillmentReceiving = receiving;
+                // Convert quantities to base units using supplier data
+                const baseQtyReceived = receiving.qty_each * (
+                    receiving.type === 'original' ? 1 : 
+                    Math.max(1, product.supplier_qty_per_unit || 1)
+                );
+                const qtyToApply = Math.min(remainingToFulfill, baseQtyReceived);
+                
+                if (qtyToApply > 0) {
+                    // If this is the first receiving being applied, use its cost
+                    if (actualCost === null && receiving.cost_each > 0) {
+                        actualCost = receiving.cost_each;
+                        firstFulfillmentReceiving = receiving;
+                    }
+                    lastFulfillmentReceiving = receiving;
+                    fulfillmentTracking.push({
+                        receiving_id: receiving.receiving_id,
+                        qty_applied: qtyToApply,
+                        qty_total: baseQtyReceived,
+                        cost: receiving.cost_each || actualCost || product.cost_each,
+                        date: receiving.received_date,
+                        received_by: receiving.received_by,
+                        received_by_name: receiving.received_by_name || 'Unknown',
+                        type: receiving.type,
+                        remaining_qty: baseQtyReceived - qtyToApply
+                    });
+                    remainingToFulfill -= qtyToApply;
+                } else {
+                    // Track excess receivings
+                    fulfillmentTracking.push({
+                        receiving_id: receiving.receiving_id,
+                        qty_applied: 0,
+                        qty_total: baseQtyReceived,
+                        cost: receiving.cost_each || actualCost || product.cost_each,
+                        date: receiving.received_date,
+                        received_by: receiving.received_by,
+                        received_by_name: receiving.received_by_name || 'Unknown',
+                        type: receiving.type,
+                        is_excess: true
+                    });
                 }
-                lastFulfillmentReceiving = receiving;
-                fulfillmentTracking.push({
-                  receiving_id: receiving.receiving_id,
-                  qty_applied: qtyToApply,
-                  qty_total: receiving.qty_each,
-                  cost: receiving.cost_each,
-                  date: receiving.received_date,
-                  received_by: receiving.received_by,
-                  received_by_name: receiving.received_by_name || 'Unknown',
-                  type: receiving.type,
-                  remaining_qty: receiving.qty_each - qtyToApply
-                });
-                remainingToFulfill -= qtyToApply;
-              } else {
-                // Track excess receivings
-                fulfillmentTracking.push({
-                  receiving_id: receiving.receiving_id,
-                  qty_applied: 0,
-                  qty_total: receiving.qty_each,
-                  cost: receiving.cost_each,
-                  date: receiving.received_date,
-                  received_by: receiving.received_by,
-                  received_by_name: receiving.received_by_name || 'Unknown',
-                  type: receiving.type,
-                  is_excess: true
-                });
-              }
-              totalReceived += receiving.qty_each;
+                totalReceived += baseQtyReceived;
             }
 
             const receiving_status = !totalReceived ? 1 : // created

inventory-server/scripts/import/purchase_orders.js

@@ -1,82 +0,0 @@
-// Split into inserts and updates
-const insertsAndUpdates = batch.reduce((acc, po) => {
-  const key = `${po.po_id}-${po.pid}`;
-  if (existingPOMap.has(key)) {
-    const existing = existingPOMap.get(key);
-    // Check if any values are different
-    const hasChanges = columnNames.some(col => {
-      const newVal = po[col] ?? null;
-      const oldVal = existing[col] ?? null;
-      // Special handling for numbers to avoid type coercion issues
-      if (typeof newVal === 'number' && typeof oldVal === 'number') {
-        return Math.abs(newVal - oldVal) > 0.00001; // Allow for tiny floating point differences
-      }
-      // Special handling for receiving_history JSON
-      if (col === 'receiving_history') {
-        return JSON.stringify(newVal) !== JSON.stringify(oldVal);
-      }
-      return newVal !== oldVal;
-    });
-
-    if (hasChanges) {
-      console.log(`PO line changed: ${key}`, {
-        po_id: po.po_id,
-        pid: po.pid,
-        changes: columnNames.filter(col => {
-          const newVal = po[col] ?? null;
-          const oldVal = existing[col] ?? null;
-          if (typeof newVal === 'number' && typeof oldVal === 'number') {
-            return Math.abs(newVal - oldVal) > 0.00001;
-          }
-          if (col === 'receiving_history') {
-            return JSON.stringify(newVal) !== JSON.stringify(oldVal);
-          }
-          return newVal !== oldVal;
-        })
-      });
-      acc.updates.push({
-        po_id: po.po_id,
-        pid: po.pid,
-        values: columnNames.map(col => po[col] ?? null)
-      });
-    }
-  } else {
-    console.log(`New PO line: ${key}`);
-    acc.inserts.push({
-      po_id: po.po_id,
-      pid: po.pid,
-      values: columnNames.map(col => po[col] ?? null)
-    });
-  }
-  return acc;
-}, { inserts: [], updates: [] });
-
-// Handle inserts
-if (insertsAndUpdates.inserts.length > 0) {
-  const insertPlaceholders = Array(insertsAndUpdates.inserts.length).fill(placeholderGroup).join(",");
-  
-  const insertResult = await localConnection.query(`
-    INSERT INTO purchase_orders (${columnNames.join(",")})
-    VALUES ${insertPlaceholders}
-  `, insertsAndUpdates.inserts.map(i => i.values).flat());
-  
-  recordsAdded += insertResult[0].affectedRows;
-}
-
-// Handle updates
-if (insertsAndUpdates.updates.length > 0) {
-  const updatePlaceholders = Array(insertsAndUpdates.updates.length).fill(placeholderGroup).join(",");
-  
-  const updateResult = await localConnection.query(`
-    INSERT INTO purchase_orders (${columnNames.join(",")})
-    VALUES ${updatePlaceholders}
-    ON DUPLICATE KEY UPDATE
-      ${columnNames
-        .filter(col => col !== "po_id" && col !== "pid")
-        .map(col => `${col} = VALUES(${col})`)
-        .join(",")};
-  `, insertsAndUpdates.updates.map(u => u.values).flat());
-  
-  // Each update affects 2 rows in affectedRows, so we divide by 2 to get actual count
-  recordsUpdated += insertsAndUpdates.updates.length;
-} 

inventory-server/scripts/metrics/brand-metrics.js

@@ -1,8 +1,11 @@
 const { outputProgress, formatElapsedTime, estimateRemaining, calculateRate, logError } = require('./utils/progress');
 const { getConnection } = require('./utils/db');
 
-async function calculateBrandMetrics(startTime, totalProducts, processedCount, isCancelled = false) {
+async function calculateBrandMetrics(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    
     try {
         if (isCancelled) {
             outputProgress({
@@ -13,11 +16,29 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders: 0,
+                processedPurchaseOrders: 0,
+                success
+            };
         }
 
+        // Get order count that will be processed
+        const [orderCount] = await connection.query(`
+            SELECT COUNT(*) as count 
+            FROM orders o 
+            WHERE o.canceled = false
+        `);
+        processedOrders = orderCount[0].count;
+
         outputProgress({
             status: 'running',
             operation: 'Starting brand metrics calculation',
@@ -26,7 +47,12 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
         // Calculate brand metrics with optimized queries
@@ -45,10 +71,21 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
             WITH filtered_products AS (
                 SELECT 
                     p.*,
-                    CASE WHEN p.stock_quantity <= 5000 THEN p.pid END as valid_pid,
-                    CASE WHEN p.visible = true AND p.stock_quantity <= 5000 THEN p.pid END as active_pid,
                     CASE 
-                        WHEN p.stock_quantity IS NULL OR p.stock_quantity < 0 OR p.stock_quantity > 5000 THEN 0 
+                        WHEN p.stock_quantity <= 5000 AND p.stock_quantity >= 0 
+                        THEN p.pid 
+                    END as valid_pid,
+                    CASE 
+                        WHEN p.visible = true 
+                        AND p.stock_quantity <= 5000 
+                        AND p.stock_quantity >= 0 
+                        THEN p.pid 
+                    END as active_pid,
+                    CASE 
+                        WHEN p.stock_quantity IS NULL 
+                        OR p.stock_quantity < 0 
+                        OR p.stock_quantity > 5000 
+                        THEN 0 
                         ELSE p.stock_quantity 
                     END as valid_stock
                 FROM products p
@@ -57,10 +94,13 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
             sales_periods AS (
                 SELECT 
                     p.brand,
-                    SUM(o.quantity * o.price) as period_revenue,
+                    SUM(o.quantity * (o.price - COALESCE(o.discount, 0))) as period_revenue,
+                    SUM(o.quantity * (o.price - COALESCE(o.discount, 0) - p.cost_price)) as period_margin,
+                    COUNT(DISTINCT DATE(o.date)) as period_days,
                     CASE 
                         WHEN o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 3 MONTH) THEN 'current'
-                        WHEN o.date BETWEEN DATE_SUB(CURRENT_DATE, INTERVAL 15 MONTH) AND DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH) THEN 'previous'
+                        WHEN o.date BETWEEN DATE_SUB(CURRENT_DATE, INTERVAL 15 MONTH) 
+                            AND DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH) THEN 'previous'
                     END as period_type
                 FROM filtered_products p
                 JOIN orders o ON p.pid = o.pid 
@@ -76,10 +116,20 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
                     SUM(p.valid_stock) as total_stock_units,
                     SUM(p.valid_stock * p.cost_price) as total_stock_cost,
                     SUM(p.valid_stock * p.price) as total_stock_retail,
-                    COALESCE(SUM(o.quantity * o.price), 0) as total_revenue,
+                    COALESCE(SUM(o.quantity * (o.price - COALESCE(o.discount, 0))), 0) as total_revenue,
                     CASE 
-                        WHEN SUM(o.quantity * o.price) > 0 THEN 
-                            (SUM((o.price - p.cost_price) * o.quantity) * 100.0) / SUM(o.price * o.quantity)
+                        WHEN SUM(o.quantity * o.price) > 0 
+                        THEN GREATEST(
+                            -100.0,
+                            LEAST(
+                                100.0,
+                                (
+                                    SUM(o.quantity * o.price) -  -- Use gross revenue (before discounts)
+                                    SUM(o.quantity * COALESCE(p.cost_price, 0))  -- Total costs
+                                ) * 100.0 / 
+                                NULLIF(SUM(o.quantity * o.price), 0)  -- Divide by gross revenue
+                            )
+                        )
                         ELSE 0 
                     END as avg_margin
                 FROM filtered_products p
@@ -97,16 +147,18 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
                 bd.avg_margin,
                 CASE
                     WHEN MAX(CASE WHEN sp.period_type = 'previous' THEN sp.period_revenue END) = 0 
-                         AND MAX(CASE WHEN sp.period_type = 'current' THEN sp.period_revenue END) > 0 THEN 100.0
-                    WHEN MAX(CASE WHEN sp.period_type = 'previous' THEN sp.period_revenue END) = 0 THEN 0.0
-                    ELSE LEAST(
-                        GREATEST(
+                         AND MAX(CASE WHEN sp.period_type = 'current' THEN sp.period_revenue END) > 0 
+                    THEN 100.0
+                    WHEN MAX(CASE WHEN sp.period_type = 'previous' THEN sp.period_revenue END) = 0 
+                    THEN 0.0
+                    ELSE GREATEST(
+                        -100.0,
+                        LEAST(
                             ((MAX(CASE WHEN sp.period_type = 'current' THEN sp.period_revenue END) - 
                               MAX(CASE WHEN sp.period_type = 'previous' THEN sp.period_revenue END)) / 
-                             NULLIF(MAX(CASE WHEN sp.period_type = 'previous' THEN sp.period_revenue END), 0)) * 100.0,
-                            -100.0
-                        ),
-                        999.99
+                             NULLIF(ABS(MAX(CASE WHEN sp.period_type = 'previous' THEN sp.period_revenue END)), 0)) * 100.0,
+                            999.99
+                        )
                     )
                 END as growth_rate
             FROM brand_data bd
@@ -134,10 +186,20 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Calculate brand time-based metrics with optimized query
         await connection.query(`
@@ -177,8 +239,18 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
                     SUM(p.valid_stock * p.price) as total_stock_retail,
                     SUM(o.quantity * o.price) as total_revenue,
                     CASE 
-                        WHEN SUM(o.quantity * o.price) > 0 THEN 
-                            (SUM((o.price - p.cost_price) * o.quantity) * 100.0) / SUM(o.price * o.quantity)
+                        WHEN SUM(o.quantity * o.price) > 0 
+                        THEN GREATEST(
+                            -100.0,
+                            LEAST(
+                                100.0,
+                                (
+                                    SUM(o.quantity * o.price) -  -- Use gross revenue (before discounts)
+                                    SUM(o.quantity * COALESCE(p.cost_price, 0))  -- Total costs
+                                ) * 100.0 / 
+                                NULLIF(SUM(o.quantity * o.price), 0)  -- Divide by gross revenue
+                            )
+                        )
                         ELSE 0 
                     END as avg_margin
                 FROM filtered_products p
@@ -207,11 +279,33 @@ async function calculateBrandMetrics(startTime, totalProducts, processedCount, i
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        return processedCount;
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('brand_metrics', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating brand metrics');
         throw error;
     } finally {

inventory-server/scripts/metrics/category-metrics.js

@@ -1,8 +1,11 @@
 const { outputProgress, formatElapsedTime, estimateRemaining, calculateRate, logError } = require('./utils/progress');
 const { getConnection } = require('./utils/db');
 
-async function calculateCategoryMetrics(startTime, totalProducts, processedCount, isCancelled = false) {
+async function calculateCategoryMetrics(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    
     try {
         if (isCancelled) {
             outputProgress({
@@ -13,11 +16,29 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders: 0,
+                processedPurchaseOrders: 0,
+                success
+            };
         }
 
+        // Get order count that will be processed
+        const [orderCount] = await connection.query(`
+            SELECT COUNT(*) as count 
+            FROM orders o 
+            WHERE o.canceled = false
+        `);
+        processedOrders = orderCount[0].count;
+
         outputProgress({
             status: 'running',
             operation: 'Starting category metrics calculation',
@@ -26,7 +47,12 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
         
         // First, calculate base category metrics
@@ -67,10 +93,20 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Then update with margin and turnover data
         await connection.query(`
@@ -80,19 +116,35 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
                     SUM(o.quantity * o.price) as total_sales,
                     SUM(o.quantity * (o.price - p.cost_price)) as total_margin,
                     SUM(o.quantity) as units_sold,
-                    AVG(GREATEST(p.stock_quantity, 0)) as avg_stock
+                    AVG(GREATEST(p.stock_quantity, 0)) as avg_stock,
+                    COUNT(DISTINCT DATE(o.date)) as active_days
                 FROM product_categories pc
                 JOIN products p ON pc.pid = p.pid
                 JOIN orders o ON p.pid = o.pid
+                LEFT JOIN turnover_config tc ON 
+                    (tc.category_id = pc.cat_id AND tc.vendor = p.vendor) OR
+                    (tc.category_id = pc.cat_id AND tc.vendor IS NULL) OR
+                    (tc.category_id IS NULL AND tc.vendor = p.vendor) OR
+                    (tc.category_id IS NULL AND tc.vendor IS NULL)
                 WHERE o.canceled = false 
-                    AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 1 YEAR)
+                    AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL COALESCE(tc.calculation_period_days, 30) DAY)
                 GROUP BY pc.cat_id
             )
             UPDATE category_metrics cm
             JOIN category_sales cs ON cm.category_id = cs.cat_id
+            LEFT JOIN turnover_config tc ON 
+                (tc.category_id = cm.category_id AND tc.vendor IS NULL) OR
+                (tc.category_id IS NULL AND tc.vendor IS NULL)
             SET 
                 cm.avg_margin = COALESCE(cs.total_margin * 100.0 / NULLIF(cs.total_sales, 0), 0),
-                cm.turnover_rate = LEAST(COALESCE(cs.units_sold / NULLIF(cs.avg_stock, 0), 0), 999.99),
+                cm.turnover_rate = CASE 
+                    WHEN cs.avg_stock > 0 AND cs.active_days > 0 
+                    THEN LEAST(
+                        (cs.units_sold / cs.avg_stock) * (365.0 / cs.active_days),
+                        999.99
+                    )
+                    ELSE 0 
+                END,
                 cm.last_calculated_at = NOW()
         `);
 
@@ -105,20 +157,34 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Finally update growth rates
         await connection.query(`
             WITH current_period AS (
                 SELECT 
                     pc.cat_id,
-                    SUM(o.quantity * o.price) as revenue
+                    SUM(o.quantity * (o.price - COALESCE(o.discount, 0)) / 
+                        (1 + COALESCE(ss.seasonality_factor, 0))) as revenue,
+                    SUM(o.quantity * (o.price - COALESCE(o.discount, 0) - p.cost_price)) as gross_profit,
+                    COUNT(DISTINCT DATE(o.date)) as days
                 FROM product_categories pc
                 JOIN products p ON pc.pid = p.pid
                 JOIN orders o ON p.pid = o.pid
+                LEFT JOIN sales_seasonality ss ON MONTH(o.date) = ss.month
                 WHERE o.canceled = false 
                     AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 3 MONTH)
                 GROUP BY pc.cat_id
@@ -126,30 +192,106 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
             previous_period AS (
                 SELECT 
                     pc.cat_id,
-                    SUM(o.quantity * o.price) as revenue
+                    SUM(o.quantity * (o.price - COALESCE(o.discount, 0)) / 
+                        (1 + COALESCE(ss.seasonality_factor, 0))) as revenue,
+                    COUNT(DISTINCT DATE(o.date)) as days
+                FROM product_categories pc
+                JOIN products p ON pc.pid = p.pid
+                JOIN orders o ON p.pid = o.pid
+                LEFT JOIN sales_seasonality ss ON MONTH(o.date) = ss.month
+                WHERE o.canceled = false 
+                    AND o.date BETWEEN DATE_SUB(CURRENT_DATE, INTERVAL 15 MONTH) 
+                    AND DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH)
+                GROUP BY pc.cat_id
+            ),
+            trend_data AS (
+                SELECT 
+                    pc.cat_id,
+                    MONTH(o.date) as month,
+                    SUM(o.quantity * (o.price - COALESCE(o.discount, 0)) / 
+                        (1 + COALESCE(ss.seasonality_factor, 0))) as revenue,
+                    COUNT(DISTINCT DATE(o.date)) as days_in_month
+                FROM product_categories pc
+                JOIN products p ON pc.pid = p.pid
+                JOIN orders o ON p.pid = o.pid
+                LEFT JOIN sales_seasonality ss ON MONTH(o.date) = ss.month
+                WHERE o.canceled = false 
+                    AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 15 MONTH)
+                GROUP BY pc.cat_id, MONTH(o.date)
+            ),
+            trend_stats AS (
+                SELECT 
+                    cat_id,
+                    COUNT(*) as n,
+                    AVG(month) as avg_x,
+                    AVG(revenue / NULLIF(days_in_month, 0)) as avg_y,
+                    SUM(month * (revenue / NULLIF(days_in_month, 0))) as sum_xy,
+                    SUM(month * month) as sum_xx
+                FROM trend_data
+                GROUP BY cat_id
+                HAVING COUNT(*) >= 6
+            ),
+            trend_analysis AS (
+                SELECT 
+                    cat_id,
+                    ((n * sum_xy) - (avg_x * n * avg_y)) / 
+                        NULLIF((n * sum_xx) - (n * avg_x * avg_x), 0) as trend_slope,
+                    avg_y as avg_daily_revenue
+                FROM trend_stats
+            ),
+            margin_calc AS (
+                SELECT 
+                    pc.cat_id,
+                    CASE 
+                        WHEN SUM(o.quantity * o.price) > 0 THEN
+                            GREATEST(
+                                -100.0,
+                                LEAST(
+                                    100.0,
+                                    (
+                                        SUM(o.quantity * o.price) -  -- Use gross revenue (before discounts)
+                                        SUM(o.quantity * COALESCE(p.cost_price, 0))  -- Total costs
+                                    ) * 100.0 / 
+                                    NULLIF(SUM(o.quantity * o.price), 0)  -- Divide by gross revenue
+                                )
+                            )
+                        ELSE NULL
+                    END as avg_margin
                 FROM product_categories pc
                 JOIN products p ON pc.pid = p.pid
                 JOIN orders o ON p.pid = o.pid
                 WHERE o.canceled = false 
-                    AND o.date BETWEEN DATE_SUB(CURRENT_DATE, INTERVAL 15 MONTH) 
-                    AND DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH)
+                    AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 3 MONTH)
                 GROUP BY pc.cat_id
             )
             UPDATE category_metrics cm
             LEFT JOIN current_period cp ON cm.category_id = cp.cat_id
             LEFT JOIN previous_period pp ON cm.category_id = pp.cat_id
+            LEFT JOIN trend_analysis ta ON cm.category_id = ta.cat_id
+            LEFT JOIN margin_calc mc ON cm.category_id = mc.cat_id
             SET 
                 cm.growth_rate = CASE
                     WHEN pp.revenue = 0 AND COALESCE(cp.revenue, 0) > 0 THEN 100.0
-                    WHEN pp.revenue = 0 THEN 0.0
-                    ELSE LEAST(
+                    WHEN pp.revenue = 0 OR cp.revenue IS NULL THEN 0.0
+                    WHEN ta.trend_slope IS NOT NULL THEN
                         GREATEST(
-                            ((COALESCE(cp.revenue, 0) - pp.revenue) / pp.revenue) * 100.0,
-                            -100.0
-                        ),
-                        999.99
-                    )
+                            -100.0,
+                            LEAST(
+                                (ta.trend_slope / NULLIF(ta.avg_daily_revenue, 0)) * 365 * 100,
+                                999.99
+                            )
+                        )
+                    ELSE
+                        GREATEST(
+                            -100.0,
+                            LEAST(
+                                ((COALESCE(cp.revenue, 0) - pp.revenue) / 
+                                    NULLIF(ABS(pp.revenue), 0)) * 100.0,
+                                999.99
+                            )
+                        )
                 END,
+                cm.avg_margin = COALESCE(mc.avg_margin, cm.avg_margin),
                 cm.last_calculated_at = NOW()
             WHERE cp.cat_id IS NOT NULL OR pp.cat_id IS NOT NULL
         `);
@@ -163,10 +305,20 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Calculate time-based metrics
         await connection.query(`
@@ -189,13 +341,23 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
                 COUNT(DISTINCT CASE WHEN p.visible = true THEN p.pid END) as active_products,
                 SUM(p.stock_quantity * p.cost_price) as total_value,
                 SUM(o.quantity * o.price) as total_revenue,
+                CASE
+                    WHEN SUM(o.quantity * o.price) > 0 THEN
+                        LEAST(
+                            GREATEST(
+                                SUM(o.quantity * (o.price - GREATEST(p.cost_price, 0))) * 100.0 / 
+                                SUM(o.quantity * o.price),
+                                -100
+                            ),
+                            100
+                        )
+                    ELSE 0
+                END as avg_margin,
                 COALESCE(
-                    SUM(o.quantity * (o.price - p.cost_price)) * 100.0 / 
-                    NULLIF(SUM(o.quantity * o.price), 0),
-                    0
-                ) as avg_margin,
-                COALESCE(
-                    SUM(o.quantity) / NULLIF(AVG(GREATEST(p.stock_quantity, 0)), 0),
+                    LEAST(
+                        SUM(o.quantity) / NULLIF(AVG(GREATEST(p.stock_quantity, 0)), 0),
+                        999.99
+                    ),
                     0
                 ) as turnover_rate
             FROM product_categories pc
@@ -216,17 +378,138 @@ async function calculateCategoryMetrics(startTime, totalProducts, processedCount
         processedCount = Math.floor(totalProducts * 0.99);
         outputProgress({
             status: 'running',
-            operation: 'Time-based metrics calculated',
+            operation: 'Time-based metrics calculated, updating category-sales metrics',
             current: processedCount,
             total: totalProducts,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
+
+        // Calculate category-sales metrics
+        await connection.query(`
+            INSERT INTO category_sales_metrics (
+                category_id,
+                brand,
+                period_start,
+                period_end,
+                avg_daily_sales,
+                total_sold,
+                num_products,
+                avg_price,
+                last_calculated_at
+            )
+            WITH date_ranges AS (
+                SELECT 
+                    DATE_SUB(CURRENT_DATE, INTERVAL 30 DAY) as period_start,
+                    CURRENT_DATE as period_end
+                UNION ALL
+                SELECT 
+                    DATE_SUB(CURRENT_DATE, INTERVAL 90 DAY),
+                    DATE_SUB(CURRENT_DATE, INTERVAL 31 DAY)
+                UNION ALL
+                SELECT 
+                    DATE_SUB(CURRENT_DATE, INTERVAL 180 DAY),
+                    DATE_SUB(CURRENT_DATE, INTERVAL 91 DAY)
+                UNION ALL
+                SELECT 
+                    DATE_SUB(CURRENT_DATE, INTERVAL 365 DAY),
+                    DATE_SUB(CURRENT_DATE, INTERVAL 181 DAY)
+            ),
+            sales_data AS (
+                SELECT 
+                    pc.cat_id,
+                    COALESCE(p.brand, 'Unknown') as brand,
+                    dr.period_start,
+                    dr.period_end,
+                    COUNT(DISTINCT p.pid) as num_products,
+                    SUM(o.quantity) as total_sold,
+                    SUM(o.quantity * o.price) as total_revenue,
+                    COUNT(DISTINCT DATE(o.date)) as num_days
+                FROM products p
+                JOIN product_categories pc ON p.pid = pc.pid
+                JOIN orders o ON p.pid = o.pid
+                CROSS JOIN date_ranges dr
+                WHERE o.canceled = false
+                    AND o.date BETWEEN dr.period_start AND dr.period_end
+                GROUP BY pc.cat_id, p.brand, dr.period_start, dr.period_end
+            )
+            SELECT 
+                cat_id as category_id,
+                brand,
+                period_start,
+                period_end,
+                CASE 
+                    WHEN num_days > 0 
+                    THEN total_sold / num_days 
+                    ELSE 0 
+                END as avg_daily_sales,
+                total_sold,
+                num_products,
+                CASE 
+                    WHEN total_sold > 0 
+                    THEN total_revenue / total_sold 
+                    ELSE 0 
+                END as avg_price,
+                NOW() as last_calculated_at
+            FROM sales_data
+            ON DUPLICATE KEY UPDATE
+                avg_daily_sales = VALUES(avg_daily_sales),
+                total_sold = VALUES(total_sold),
+                num_products = VALUES(num_products),
+                avg_price = VALUES(avg_price),
+                last_calculated_at = VALUES(last_calculated_at)
+        `);
+
+        processedCount = Math.floor(totalProducts * 1.0);
+        outputProgress({
+            status: 'running',
+            operation: 'Category-sales metrics calculated',
+            current: processedCount,
+            total: totalProducts,
+            elapsed: formatElapsedTime(startTime),
+            remaining: estimateRemaining(startTime, processedCount, totalProducts),
+            rate: calculateRate(startTime, processedCount),
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
+        });
+
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('category_metrics', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating category metrics');
         throw error;
     } finally {

inventory-server/scripts/metrics/financial-metrics.js

@@ -1,8 +1,11 @@
 const { outputProgress, formatElapsedTime, estimateRemaining, calculateRate, logError } = require('./utils/progress');
 const { getConnection } = require('./utils/db');
 
-async function calculateFinancialMetrics(startTime, totalProducts, processedCount, isCancelled = false) {
+async function calculateFinancialMetrics(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    
     try {
         if (isCancelled) {
             outputProgress({
@@ -13,11 +16,30 @@ async function calculateFinancialMetrics(startTime, totalProducts, processedCoun
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders: 0,
+                processedPurchaseOrders: 0,
+                success
+            };
         }
 
+        // Get order count that will be processed
+        const [orderCount] = await connection.query(`
+            SELECT COUNT(*) as count 
+            FROM orders o 
+            WHERE o.canceled = false
+                AND DATE(o.date) >= DATE_SUB(CURDATE(), INTERVAL 12 MONTH)
+        `);
+        processedOrders = orderCount[0].count;
+
         outputProgress({
             status: 'running',
             operation: 'Starting financial metrics calculation',
@@ -26,7 +48,12 @@ async function calculateFinancialMetrics(startTime, totalProducts, processedCoun
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
         // Calculate financial metrics with optimized query
@@ -59,7 +86,8 @@ async function calculateFinancialMetrics(startTime, totalProducts, processedCoun
                     WHEN COALESCE(pf.inventory_value, 0) > 0 AND pf.active_days > 0 THEN 
                         (COALESCE(pf.gross_profit, 0) * (365.0 / pf.active_days)) / COALESCE(pf.inventory_value, 0)
                     ELSE 0 
-                END
+                END,
+                pm.last_calculated_at = CURRENT_TIMESTAMP
         `);
 
         processedCount = Math.floor(totalProducts * 0.65);
@@ -71,10 +99,20 @@ async function calculateFinancialMetrics(startTime, totalProducts, processedCoun
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Update time-based aggregates with optimized query
         await connection.query(`
@@ -115,11 +153,33 @@ async function calculateFinancialMetrics(startTime, totalProducts, processedCoun
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        return processedCount;
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('financial_metrics', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating financial metrics');
         throw error;
     } finally {

inventory-server/scripts/metrics/product-metrics.js

@@ -11,11 +11,21 @@ function sanitizeValue(value) {
 
 async function calculateProductMetrics(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    const BATCH_SIZE = 5000;
+    
     try {
         // Skip flags are inherited from the parent scope
         const SKIP_PRODUCT_BASE_METRICS = 0;
         const SKIP_PRODUCT_TIME_AGGREGATES = 0;
 
+        // Get total product count if not provided
+        if (!totalProducts) {
+            const [productCount] = await connection.query('SELECT COUNT(*) as count FROM products');
+            totalProducts = productCount[0].count;
+        }
+
         if (isCancelled) {
             outputProgress({
                 status: 'cancelled',
@@ -25,11 +35,37 @@ async function calculateProductMetrics(startTime, totalProducts, processedCount
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders,
+                processedPurchaseOrders: 0,
+                success
+            };
         }
 
+        // First ensure all products have a metrics record
+        await connection.query(`
+            INSERT IGNORE INTO product_metrics (pid, last_calculated_at)
+            SELECT pid, NOW()
+            FROM products
+        `);
+
+        // Get threshold settings once
+        const [thresholds] = await connection.query(`
+            SELECT critical_days, reorder_days, overstock_days, low_stock_threshold
+            FROM stock_thresholds 
+            WHERE category_id IS NULL AND vendor IS NULL
+            LIMIT 1
+        `);
+        const defaultThresholds = thresholds[0];
+
         // Calculate base product metrics
         if (!SKIP_PRODUCT_BASE_METRICS) {
             outputProgress({
@@ -40,89 +76,237 @@ async function calculateProductMetrics(startTime, totalProducts, processedCount
                 elapsed: formatElapsedTime(startTime),
                 remaining: estimateRemaining(startTime, processedCount, totalProducts),
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
 
-            // Calculate base metrics
+            // Get order count that will be processed
+            const [orderCount] = await connection.query(`
+                SELECT COUNT(*) as count 
+                FROM orders o 
+                WHERE o.canceled = false
+            `);
+            processedOrders = orderCount[0].count;
+
+            // Clear temporary tables
+            await connection.query('TRUNCATE TABLE temp_sales_metrics');
+            await connection.query('TRUNCATE TABLE temp_purchase_metrics');
+
+            // Populate temp_sales_metrics with base stats and sales averages
             await connection.query(`
-                UPDATE product_metrics pm
-                JOIN (
-                    SELECT 
-                        p.pid,
-                        p.cost_price * p.stock_quantity as inventory_value,
-                        SUM(o.quantity) as total_quantity,
-                        COUNT(DISTINCT o.order_number) as number_of_orders,
-                        SUM(o.quantity * o.price) as total_revenue,
-                        SUM(o.quantity * p.cost_price) as cost_of_goods_sold,
-                        AVG(o.price) as avg_price,
-                        STDDEV(o.price) as price_std,
-                        MIN(o.date) as first_sale_date,
-                        MAX(o.date) as last_sale_date,
-                        COUNT(DISTINCT DATE(o.date)) as active_days
-                    FROM products p
-                    LEFT JOIN orders o ON p.pid = o.pid AND o.canceled = false
-                    GROUP BY p.pid
-                ) stats ON pm.pid = stats.pid
-                SET 
-                    pm.inventory_value = COALESCE(stats.inventory_value, 0),
-                    pm.avg_quantity_per_order = COALESCE(stats.total_quantity / NULLIF(stats.number_of_orders, 0), 0),
-                    pm.number_of_orders = COALESCE(stats.number_of_orders, 0),
-                    pm.total_revenue = COALESCE(stats.total_revenue, 0),
-                    pm.cost_of_goods_sold = COALESCE(stats.cost_of_goods_sold, 0),
-                    pm.gross_profit = COALESCE(stats.total_revenue - stats.cost_of_goods_sold, 0),
-                    pm.avg_margin_percent = CASE 
-                        WHEN COALESCE(stats.total_revenue, 0) > 0 
-                        THEN ((stats.total_revenue - stats.cost_of_goods_sold) / stats.total_revenue) * 100 
+                INSERT INTO temp_sales_metrics
+                SELECT 
+                    p.pid,
+                    COALESCE(SUM(o.quantity) / NULLIF(COUNT(DISTINCT DATE(o.date)), 0), 0) as daily_sales_avg,
+                    COALESCE(SUM(o.quantity) / NULLIF(CEIL(COUNT(DISTINCT DATE(o.date)) / 7), 0), 0) as weekly_sales_avg,
+                    COALESCE(SUM(o.quantity) / NULLIF(CEIL(COUNT(DISTINCT DATE(o.date)) / 30), 0), 0) as monthly_sales_avg,
+                    COALESCE(SUM(o.quantity * o.price), 0) as total_revenue,
+                    CASE 
+                        WHEN SUM(o.quantity * o.price) > 0 
+                        THEN ((SUM(o.quantity * o.price) - SUM(o.quantity * p.cost_price)) / SUM(o.quantity * o.price)) * 100 
                         ELSE 0 
-                    END,
-                    pm.first_sale_date = stats.first_sale_date,
-                    pm.last_sale_date = stats.last_sale_date,
-                    pm.gmroi = CASE 
-                        WHEN COALESCE(stats.inventory_value, 0) > 0 
-                        THEN (stats.total_revenue - stats.cost_of_goods_sold) / stats.inventory_value
-                        ELSE 0 
-                    END,
-                    pm.last_calculated_at = NOW()
+                    END as avg_margin_percent,
+                    MIN(o.date) as first_sale_date,
+                    MAX(o.date) as last_sale_date
+                FROM products p
+                LEFT JOIN orders o ON p.pid = o.pid 
+                    AND o.canceled = false
+                    AND o.date >= DATE_SUB(CURDATE(), INTERVAL 90 DAY)
+                GROUP BY p.pid
             `);
 
-            processedCount = Math.floor(totalProducts * 0.4);
-            outputProgress({
-                status: 'running',
-                operation: 'Base product metrics calculated',
-                current: processedCount,
-                total: totalProducts,
-                elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
-            });
-        } else {
-            processedCount = Math.floor(totalProducts * 0.4);
-            outputProgress({
-                status: 'running',
-                operation: 'Skipping base product metrics calculation',
-                current: processedCount,
-                total: totalProducts,
-                elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
-            });
-        }
+            // Populate temp_purchase_metrics
+            await connection.query(`
+                INSERT INTO temp_purchase_metrics
+                SELECT 
+                    p.pid,
+                    AVG(DATEDIFF(po.received_date, po.date)) as avg_lead_time_days,
+                    MAX(po.date) as last_purchase_date,
+                    MIN(po.received_date) as first_received_date,
+                    MAX(po.received_date) as last_received_date
+                FROM products p
+                LEFT JOIN purchase_orders po ON p.pid = po.pid 
+                    AND po.received_date IS NOT NULL
+                    AND po.date >= DATE_SUB(CURDATE(), INTERVAL 365 DAY)
+                GROUP BY p.pid
+            `);
 
-        if (isCancelled) return processedCount;
+            // Process updates in batches
+            let lastPid = 0;
+            while (true) {
+                if (isCancelled) break;
+
+                const [batch] = await connection.query(
+                    'SELECT pid FROM products WHERE pid > ? ORDER BY pid LIMIT ?',
+                    [lastPid, BATCH_SIZE]
+                );
+
+                if (batch.length === 0) break;
+
+                await connection.query(`
+                    UPDATE product_metrics pm
+                    JOIN products p ON pm.pid = p.pid
+                    LEFT JOIN temp_sales_metrics sm ON pm.pid = sm.pid
+                    LEFT JOIN temp_purchase_metrics lm ON pm.pid = lm.pid
+                    SET 
+                        pm.inventory_value = p.stock_quantity * NULLIF(p.cost_price, 0),
+                        pm.daily_sales_avg = COALESCE(sm.daily_sales_avg, 0),
+                        pm.weekly_sales_avg = COALESCE(sm.weekly_sales_avg, 0),
+                        pm.monthly_sales_avg = COALESCE(sm.monthly_sales_avg, 0),
+                        pm.total_revenue = COALESCE(sm.total_revenue, 0),
+                        pm.avg_margin_percent = COALESCE(sm.avg_margin_percent, 0),
+                        pm.first_sale_date = sm.first_sale_date,
+                        pm.last_sale_date = sm.last_sale_date,
+                        pm.avg_lead_time_days = COALESCE(lm.avg_lead_time_days, 30),
+                        pm.days_of_inventory = CASE 
+                            WHEN COALESCE(sm.daily_sales_avg, 0) > 0 
+                            THEN FLOOR(p.stock_quantity / NULLIF(sm.daily_sales_avg, 0))
+                            ELSE NULL 
+                        END,
+                        pm.weeks_of_inventory = CASE 
+                            WHEN COALESCE(sm.weekly_sales_avg, 0) > 0 
+                            THEN FLOOR(p.stock_quantity / NULLIF(sm.weekly_sales_avg, 0))
+                            ELSE NULL 
+                        END,
+                        pm.stock_status = CASE
+                            WHEN p.stock_quantity <= 0 THEN 'Out of Stock'
+                            WHEN COALESCE(sm.daily_sales_avg, 0) = 0 AND p.stock_quantity <= ? THEN 'Low Stock'
+                            WHEN COALESCE(sm.daily_sales_avg, 0) = 0 THEN 'In Stock'
+                            WHEN p.stock_quantity / NULLIF(sm.daily_sales_avg, 0) <= ? THEN 'Critical'
+                            WHEN p.stock_quantity / NULLIF(sm.daily_sales_avg, 0) <= ? THEN 'Reorder'
+                            WHEN p.stock_quantity / NULLIF(sm.daily_sales_avg, 0) > ? THEN 'Overstocked'
+                            ELSE 'Healthy'
+                        END,
+                        pm.safety_stock = CASE
+                            WHEN COALESCE(sm.daily_sales_avg, 0) > 0 THEN
+                                CEIL(sm.daily_sales_avg * SQRT(COALESCE(lm.avg_lead_time_days, 30)) * 1.96)
+                            ELSE ?
+                        END,
+                        pm.reorder_point = CASE
+                            WHEN COALESCE(sm.daily_sales_avg, 0) > 0 THEN
+                                CEIL(sm.daily_sales_avg * COALESCE(lm.avg_lead_time_days, 30)) + 
+                                CEIL(sm.daily_sales_avg * SQRT(COALESCE(lm.avg_lead_time_days, 30)) * 1.96)
+                            ELSE ?
+                        END,
+                        pm.reorder_qty = CASE
+                            WHEN COALESCE(sm.daily_sales_avg, 0) > 0 AND NULLIF(p.cost_price, 0) IS NOT NULL THEN
+                                GREATEST(
+                                    CEIL(SQRT((2 * (sm.daily_sales_avg * 365) * 25) / (NULLIF(p.cost_price, 0) * 0.25))),
+                                    ?
+                                )
+                            ELSE ?
+                        END,
+                        pm.overstocked_amt = CASE
+                            WHEN p.stock_quantity / NULLIF(sm.daily_sales_avg, 0) > ? 
+                            THEN GREATEST(0, p.stock_quantity - CEIL(sm.daily_sales_avg * ?))
+                            ELSE 0
+                        END,
+                        pm.last_calculated_at = NOW()
+                    WHERE p.pid IN (${batch.map(() => '?').join(',')})
+                `,
+                [
+                    defaultThresholds.low_stock_threshold,
+                    defaultThresholds.critical_days,
+                    defaultThresholds.reorder_days,
+                    defaultThresholds.overstock_days,
+                    defaultThresholds.low_stock_threshold,
+                    defaultThresholds.low_stock_threshold,
+                    defaultThresholds.low_stock_threshold,
+                    defaultThresholds.low_stock_threshold,
+                    defaultThresholds.overstock_days,
+                    defaultThresholds.overstock_days,
+                    ...batch.map(row => row.pid)
+                ]
+                );
+
+                lastPid = batch[batch.length - 1].pid;
+                processedCount += batch.length;
+
+                outputProgress({
+                    status: 'running',
+                    operation: 'Processing base metrics batch',
+                    current: processedCount,
+                    total: totalProducts,
+                    elapsed: formatElapsedTime(startTime),
+                    remaining: estimateRemaining(startTime, processedCount, totalProducts),
+                    rate: calculateRate(startTime, processedCount),
+                    percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                    timing: {
+                        start_time: new Date(startTime).toISOString(),
+                        end_time: new Date().toISOString(),
+                        elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                    }
+                });
+            }
+
+            // Calculate forecast accuracy and bias in batches
+            lastPid = 0;
+            while (true) {
+                if (isCancelled) break;
+
+                const [batch] = await connection.query(
+                    'SELECT pid FROM products WHERE pid > ? ORDER BY pid LIMIT ?',
+                    [lastPid, BATCH_SIZE]
+                );
+
+                if (batch.length === 0) break;
+
+                await connection.query(`
+                    UPDATE product_metrics pm
+                    JOIN (
+                        SELECT 
+                            sf.pid,
+                            AVG(CASE 
+                                WHEN o.quantity > 0 
+                                THEN ABS(sf.forecast_units - o.quantity) / o.quantity * 100
+                                ELSE 100 
+                            END) as avg_forecast_error,
+                            AVG(CASE 
+                                WHEN o.quantity > 0 
+                                THEN (sf.forecast_units - o.quantity) / o.quantity * 100
+                                ELSE 0 
+                            END) as avg_forecast_bias,
+                            MAX(sf.forecast_date) as last_forecast_date
+                        FROM sales_forecasts sf
+                        JOIN orders o ON sf.pid = o.pid 
+                            AND DATE(o.date) = sf.forecast_date
+                        WHERE o.canceled = false
+                            AND sf.forecast_date >= DATE_SUB(CURRENT_DATE, INTERVAL 90 DAY)
+                            AND sf.pid IN (?)
+                        GROUP BY sf.pid
+                    ) fa ON pm.pid = fa.pid
+                    SET 
+                        pm.forecast_accuracy = GREATEST(0, 100 - LEAST(fa.avg_forecast_error, 100)),
+                        pm.forecast_bias = GREATEST(-100, LEAST(fa.avg_forecast_bias, 100)),
+                        pm.last_forecast_date = fa.last_forecast_date,
+                        pm.last_calculated_at = NOW()
+                    WHERE pm.pid IN (?)
+                `, [batch.map(row => row.pid), batch.map(row => row.pid)]);
+
+                lastPid = batch[batch.length - 1].pid;
+            }
+        }
 
         // Calculate product time aggregates
         if (!SKIP_PRODUCT_TIME_AGGREGATES) {
             outputProgress({
                 status: 'running',
                 operation: 'Starting product time aggregates calculation',
-                current: processedCount,
-                total: totalProducts,
+                current: processedCount || 0,
+                total: totalProducts || 0,
                 elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                remaining: estimateRemaining(startTime, processedCount || 0, totalProducts || 0),
+                rate: calculateRate(startTime, processedCount || 0),
+                percentage: (((processedCount || 0) / (totalProducts || 1)) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
 
             // Calculate time-based aggregates
@@ -179,29 +363,206 @@ async function calculateProductMetrics(startTime, totalProducts, processedCount
             outputProgress({
                 status: 'running',
                 operation: 'Product time aggregates calculated',
-                current: processedCount,
-                total: totalProducts,
+                current: processedCount || 0,
+                total: totalProducts || 0,
                 elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                remaining: estimateRemaining(startTime, processedCount || 0, totalProducts || 0),
+                rate: calculateRate(startTime, processedCount || 0),
+                percentage: (((processedCount || 0) / (totalProducts || 1)) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
         } else {
             processedCount = Math.floor(totalProducts * 0.6);
             outputProgress({
                 status: 'running',
                 operation: 'Skipping product time aggregates calculation',
-                current: processedCount,
-                total: totalProducts,
+                current: processedCount || 0,
+                total: totalProducts || 0,
                 elapsed: formatElapsedTime(startTime),
-                remaining: estimateRemaining(startTime, processedCount, totalProducts),
-                rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                remaining: estimateRemaining(startTime, processedCount || 0, totalProducts || 0),
+                rate: calculateRate(startTime, processedCount || 0),
+                percentage: (((processedCount || 0) / (totalProducts || 1)) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
         }
 
-        return processedCount;
+        // Calculate ABC classification
+        outputProgress({
+            status: 'running',
+            operation: 'Starting ABC classification',
+            current: processedCount,
+            total: totalProducts,
+            elapsed: formatElapsedTime(startTime),
+            remaining: estimateRemaining(startTime, processedCount, totalProducts),
+            rate: calculateRate(startTime, processedCount),
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
+        });
+
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,  // This module doesn't process POs
+            success
+        };
+
+        const [abcConfig] = await connection.query('SELECT a_threshold, b_threshold FROM abc_classification_config WHERE id = 1');
+        const abcThresholds = abcConfig[0] || { a_threshold: 20, b_threshold: 50 };
+
+        // First, create and populate the rankings table with an index
+        await connection.query('DROP TEMPORARY TABLE IF EXISTS temp_revenue_ranks');
+        await connection.query(`
+            CREATE TEMPORARY TABLE temp_revenue_ranks (
+                pid BIGINT NOT NULL,
+                total_revenue DECIMAL(10,3),
+                rank_num INT,
+                dense_rank_num INT,
+                percentile DECIMAL(5,2),
+                total_count INT,
+                PRIMARY KEY (pid),
+                INDEX (rank_num),
+                INDEX (dense_rank_num),
+                INDEX (percentile)
+            ) ENGINE=MEMORY
+        `);
+
+        // Calculate rankings with proper tie handling
+        await connection.query(`
+            INSERT INTO temp_revenue_ranks
+            WITH revenue_data AS (
+                SELECT 
+                    pid,
+                    total_revenue,
+                    COUNT(*) OVER () as total_count,
+                    PERCENT_RANK() OVER (ORDER BY total_revenue DESC) * 100 as percentile,
+                    RANK() OVER (ORDER BY total_revenue DESC) as rank_num,
+                    DENSE_RANK() OVER (ORDER BY total_revenue DESC) as dense_rank_num
+                FROM product_metrics 
+                WHERE total_revenue > 0
+            )
+            SELECT 
+                pid,
+                total_revenue,
+                rank_num,
+                dense_rank_num,
+                percentile,
+                total_count
+            FROM revenue_data
+        `);
+
+        // Get total count for percentage calculation
+        const [rankingCount] = await connection.query('SELECT MAX(rank_num) as total_count FROM temp_revenue_ranks');
+        const totalCount = rankingCount[0].total_count || 1;
+        const max_rank = totalCount;
+
+        // Process updates in batches
+        let abcProcessedCount = 0;
+        const batchSize = 5000;
+
+        while (true) {
+            if (isCancelled) return {
+                processedProducts: processedCount,
+                processedOrders,
+                processedPurchaseOrders: 0,  // This module doesn't process POs
+                success
+            };
+
+            // Get a batch of PIDs that need updating
+            const [pids] = await connection.query(`
+                SELECT pm.pid 
+                FROM product_metrics pm
+                LEFT JOIN temp_revenue_ranks tr ON pm.pid = tr.pid
+                WHERE pm.abc_class IS NULL 
+                OR pm.abc_class != 
+                    CASE 
+                        WHEN tr.pid IS NULL THEN 'C'
+                        WHEN tr.percentile <= ? THEN 'A'
+                        WHEN tr.percentile <= ? THEN 'B'
+                        ELSE 'C'
+                    END
+                LIMIT ?
+            `, [abcThresholds.a_threshold, abcThresholds.b_threshold, batchSize]);
+
+            if (pids.length === 0) break;
+
+            await connection.query(`
+                UPDATE product_metrics pm
+                LEFT JOIN temp_revenue_ranks tr ON pm.pid = tr.pid
+                SET pm.abc_class = 
+                    CASE 
+                        WHEN tr.pid IS NULL THEN 'C'
+                        WHEN tr.percentile <= ? THEN 'A'
+                        WHEN tr.percentile <= ? THEN 'B'
+                        ELSE 'C'
+                    END,
+                    pm.last_calculated_at = NOW()
+                WHERE pm.pid IN (?)
+            `, [abcThresholds.a_threshold, abcThresholds.b_threshold, pids.map(row => row.pid)]);
+
+            // Now update turnover rate with proper handling of zero inventory periods
+            await connection.query(`
+                UPDATE product_metrics pm
+                JOIN (
+                    SELECT 
+                        o.pid,
+                        SUM(o.quantity) as total_sold,
+                        COUNT(DISTINCT DATE(o.date)) as active_days,
+                        AVG(CASE 
+                            WHEN p.stock_quantity > 0 THEN p.stock_quantity 
+                            ELSE NULL 
+                        END) as avg_nonzero_stock
+                    FROM orders o
+                    JOIN products p ON o.pid = p.pid
+                    WHERE o.canceled = false 
+                    AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 90 DAY)
+                    AND o.pid IN (?)
+                    GROUP BY o.pid
+                ) sales ON pm.pid = sales.pid
+                SET 
+                    pm.turnover_rate = CASE 
+                        WHEN sales.avg_nonzero_stock > 0 AND sales.active_days > 0 
+                        THEN LEAST(
+                            (sales.total_sold / sales.avg_nonzero_stock) * (365.0 / sales.active_days),
+                            999.99
+                        )
+                        ELSE 0 
+                    END,
+                    pm.last_calculated_at = NOW()
+                WHERE pm.pid IN (?)
+            `, [pids.map(row => row.pid), pids.map(row => row.pid)]);
+        }
+
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('product_metrics', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount || 0,
+            processedOrders: processedOrders || 0,
+            processedPurchaseOrders: 0,  // This module doesn't process POs
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating product metrics');
         throw error;
     } finally {
@@ -257,9 +618,9 @@ function calculateReorderQuantities(stock, stock_status, daily_sales_avg, avg_le
     if (daily_sales_avg > 0) {
         const annual_demand = daily_sales_avg * 365;
         const order_cost = 25; // Fixed cost per order
-        const holding_cost_percent = 0.25; // 25% annual holding cost
+        const holding_cost = config.cost_price * 0.25; // 25% of unit cost as annual holding cost
         
-        reorder_qty = Math.ceil(Math.sqrt((2 * annual_demand * order_cost) / holding_cost_percent));
+        reorder_qty = Math.ceil(Math.sqrt((2 * annual_demand * order_cost) / holding_cost));
     } else {
         // If no sales data, use a basic calculation
         reorder_qty = Math.max(safety_stock, config.low_stock_threshold);

inventory-server/scripts/metrics/sales-forecasts.js

@@ -1,8 +1,11 @@
 const { outputProgress, formatElapsedTime, estimateRemaining, calculateRate, logError } = require('./utils/progress');
 const { getConnection } = require('./utils/db');
 
-async function calculateSalesForecasts(startTime, totalProducts, processedCount, isCancelled = false) {
+async function calculateSalesForecasts(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    
     try {
         if (isCancelled) {
             outputProgress({
@@ -13,11 +16,30 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders: 0,
+                processedPurchaseOrders: 0,
+                success
+            };
         }
 
+        // Get order count that will be processed
+        const [orderCount] = await connection.query(`
+            SELECT COUNT(*) as count 
+            FROM orders o 
+            WHERE o.canceled = false
+                AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 90 DAY)
+        `);
+        processedOrders = orderCount[0].count;
+
         outputProgress({
             status: 'running',
             operation: 'Starting sales forecasts calculation',
@@ -26,7 +48,12 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
         // First, create a temporary table for forecast dates
@@ -65,10 +92,20 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Create temporary table for daily sales stats
         await connection.query(`
@@ -94,10 +131,20 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Create temporary table for product stats
         await connection.query(`
@@ -119,10 +166,20 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Calculate product-level forecasts
         await connection.query(`
@@ -134,37 +191,76 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
                 confidence_level,
                 last_calculated_at
             )
+            WITH daily_stats AS (
+                SELECT 
+                    ds.pid,
+                    AVG(ds.daily_quantity) as avg_daily_qty,
+                    STDDEV(ds.daily_quantity) as std_daily_qty,
+                    COUNT(DISTINCT ds.day_count) as data_points,
+                    SUM(ds.day_count) as total_days,
+                    AVG(ds.daily_revenue) as avg_daily_revenue,
+                    STDDEV(ds.daily_revenue) as std_daily_revenue,
+                    MIN(ds.daily_quantity) as min_daily_qty,
+                    MAX(ds.daily_quantity) as max_daily_qty,
+                    -- Calculate variance without using LAG
+                    COALESCE(
+                        STDDEV(ds.daily_quantity) / NULLIF(AVG(ds.daily_quantity), 0),
+                        0
+                    ) as daily_variance_ratio
+                FROM temp_daily_sales ds
+                GROUP BY ds.pid
+                HAVING AVG(ds.daily_quantity) > 0
+            )
             SELECT 
                 ds.pid,
                 fd.forecast_date,
                 GREATEST(0, 
-                    AVG(ds.daily_quantity) * 
-                    (1 + COALESCE(sf.seasonality_factor, 0))
+                    ROUND(
+                        ds.avg_daily_qty * 
+                        (1 + COALESCE(sf.seasonality_factor, 0)) *
+                        CASE
+                            WHEN ds.std_daily_qty / NULLIF(ds.avg_daily_qty, 0) > 1.5 THEN 0.85
+                            WHEN ds.std_daily_qty / NULLIF(ds.avg_daily_qty, 0) > 1.0 THEN 0.9
+                            WHEN ds.std_daily_qty / NULLIF(ds.avg_daily_qty, 0) > 0.5 THEN 0.95
+                            ELSE 1.0
+                        END,
+                        2
+                    )
                 ) as forecast_units,
                 GREATEST(0, 
-                    COALESCE(
-                        CASE 
-                            WHEN SUM(ds.day_count) >= 4 THEN AVG(ds.daily_revenue)
-                            ELSE ps.overall_avg_revenue
-                        END * 
-                        (1 + COALESCE(sf.seasonality_factor, 0)) *
-                        (0.95 + (RAND() * 0.1)),
-                        0
+                    ROUND(
+                        COALESCE(
+                            CASE 
+                                WHEN ds.data_points >= 4 THEN ds.avg_daily_revenue
+                                ELSE ps.overall_avg_revenue
+                            END * 
+                            (1 + COALESCE(sf.seasonality_factor, 0)) *
+                            CASE
+                                WHEN ds.std_daily_revenue / NULLIF(ds.avg_daily_revenue, 0) > 1.5 THEN 0.85
+                                WHEN ds.std_daily_revenue / NULLIF(ds.avg_daily_revenue, 0) > 1.0 THEN 0.9
+                                WHEN ds.std_daily_revenue / NULLIF(ds.avg_daily_revenue, 0) > 0.5 THEN 0.95
+                                ELSE 1.0
+                            END,
+                            0
+                        ),
+                        2
                     )
                 ) as forecast_revenue,
                 CASE
-                    WHEN ps.total_days >= 60 THEN 90
-                    WHEN ps.total_days >= 30 THEN 80
-                    WHEN ps.total_days >= 14 THEN 70
+                    WHEN ds.total_days >= 60 AND ds.daily_variance_ratio < 0.5 THEN 90
+                    WHEN ds.total_days >= 60 THEN 85
+                    WHEN ds.total_days >= 30 AND ds.daily_variance_ratio < 0.5 THEN 80
+                    WHEN ds.total_days >= 30 THEN 75
+                    WHEN ds.total_days >= 14 AND ds.daily_variance_ratio < 0.5 THEN 70
+                    WHEN ds.total_days >= 14 THEN 65
                     ELSE 60
                 END as confidence_level,
                 NOW() as last_calculated_at
-            FROM temp_daily_sales ds
+            FROM daily_stats ds
             JOIN temp_product_stats ps ON ds.pid = ps.pid
             CROSS JOIN temp_forecast_dates fd
             LEFT JOIN sales_seasonality sf ON fd.month = sf.month
-            GROUP BY ds.pid, fd.forecast_date, ps.overall_avg_revenue, ps.total_days, sf.seasonality_factor
-            HAVING AVG(ds.daily_quantity) > 0
+            GROUP BY ds.pid, fd.forecast_date, ps.overall_avg_revenue, sf.seasonality_factor
             ON DUPLICATE KEY UPDATE
                 forecast_units = VALUES(forecast_units),
                 forecast_revenue = VALUES(forecast_revenue),
@@ -181,10 +277,20 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Create temporary table for category stats
         await connection.query(`
@@ -221,10 +327,20 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Calculate category-level forecasts
         await connection.query(`
@@ -292,11 +408,33 @@ async function calculateSalesForecasts(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        return processedCount;
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('sales_forecasts', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating sales forecasts');
         throw error;
     } finally {

inventory-server/scripts/metrics/time-aggregates.js

@@ -1,8 +1,11 @@
 const { outputProgress, formatElapsedTime, estimateRemaining, calculateRate, logError } = require('./utils/progress');
 const { getConnection } = require('./utils/db');
 
-async function calculateTimeAggregates(startTime, totalProducts, processedCount, isCancelled = false) {
+async function calculateTimeAggregates(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    
     try {
         if (isCancelled) {
             outputProgress({
@@ -13,11 +16,29 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders: 0,
+                processedPurchaseOrders: 0,
+                success
+            };
         }
 
+        // Get order count that will be processed
+        const [orderCount] = await connection.query(`
+            SELECT COUNT(*) as count 
+            FROM orders o 
+            WHERE o.canceled = false
+        `);
+        processedOrders = orderCount[0].count;
+
         outputProgress({
             status: 'running',
             operation: 'Starting time aggregates calculation',
@@ -26,7 +47,12 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
         // Initial insert of time-based aggregates
@@ -42,9 +68,11 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                 stock_received,
                 stock_ordered,
                 avg_price,
-                profit_margin
+                profit_margin,
+                inventory_value,
+                gmroi
             )
-            WITH sales_data AS (
+            WITH monthly_sales AS (
                 SELECT 
                     o.pid,
                     YEAR(o.date) as year,
@@ -55,17 +83,19 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                     COUNT(DISTINCT o.order_number) as order_count,
                     AVG(o.price - COALESCE(o.discount, 0)) as avg_price,
                     CASE 
-                        WHEN SUM((o.price - COALESCE(o.discount, 0)) * o.quantity) = 0 THEN 0
-                        ELSE ((SUM((o.price - COALESCE(o.discount, 0)) * o.quantity) - 
-                              SUM(COALESCE(p.cost_price, 0) * o.quantity)) / 
-                              SUM((o.price - COALESCE(o.discount, 0)) * o.quantity)) * 100
-                    END as profit_margin
+                        WHEN SUM((o.price - COALESCE(o.discount, 0)) * o.quantity) > 0 
+                        THEN ((SUM((o.price - COALESCE(o.discount, 0)) * o.quantity) - SUM(COALESCE(p.cost_price, 0) * o.quantity)) 
+                            / SUM((o.price - COALESCE(o.discount, 0)) * o.quantity)) * 100
+                        ELSE 0 
+                    END as profit_margin,
+                    p.cost_price * p.stock_quantity as inventory_value,
+                    COUNT(DISTINCT DATE(o.date)) as active_days
                 FROM orders o
                 JOIN products p ON o.pid = p.pid
-                WHERE o.canceled = 0
+                WHERE o.canceled = false
                 GROUP BY o.pid, YEAR(o.date), MONTH(o.date)
             ),
-            purchase_data AS (
+            monthly_stock AS (
                 SELECT 
                     pid,
                     YEAR(date) as year,
@@ -73,45 +103,100 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                     SUM(received) as stock_received,
                     SUM(ordered) as stock_ordered
                 FROM purchase_orders
-                WHERE status = 50
                 GROUP BY pid, YEAR(date), MONTH(date)
+            ),
+            base_products AS (
+                SELECT 
+                    p.pid,
+                    p.cost_price * p.stock_quantity as inventory_value
+                FROM products p
             )
             SELECT 
-                s.pid,
-                s.year,
-                s.month,
-                s.total_quantity_sold,
-                s.total_revenue,
-                s.total_cost,
-                s.order_count,
-                COALESCE(p.stock_received, 0) as stock_received,
-                COALESCE(p.stock_ordered, 0) as stock_ordered,
-                s.avg_price,
-                s.profit_margin
-            FROM sales_data s
-            LEFT JOIN purchase_data p 
-                ON s.pid = p.pid 
-                AND s.year = p.year 
-                AND s.month = p.month
+                COALESCE(s.pid, ms.pid) as pid,
+                COALESCE(s.year, ms.year) as year,
+                COALESCE(s.month, ms.month) as month,
+                COALESCE(s.total_quantity_sold, 0) as total_quantity_sold,
+                COALESCE(s.total_revenue, 0) as total_revenue,
+                COALESCE(s.total_cost, 0) as total_cost,
+                COALESCE(s.order_count, 0) as order_count,
+                COALESCE(ms.stock_received, 0) as stock_received,
+                COALESCE(ms.stock_ordered, 0) as stock_ordered,
+                COALESCE(s.avg_price, 0) as avg_price,
+                COALESCE(s.profit_margin, 0) as profit_margin,
+                COALESCE(s.inventory_value, bp.inventory_value, 0) as inventory_value,
+                CASE 
+                    WHEN COALESCE(s.inventory_value, bp.inventory_value, 0) > 0 
+                        AND COALESCE(s.active_days, 0) > 0 
+                    THEN (COALESCE(s.total_revenue - s.total_cost, 0) * (365.0 / s.active_days)) 
+                        / COALESCE(s.inventory_value, bp.inventory_value)
+                    ELSE 0 
+                END as gmroi
+            FROM (
+                SELECT * FROM monthly_sales s
+                UNION ALL
+                SELECT 
+                    ms.pid,
+                    ms.year,
+                    ms.month,
+                    0 as total_quantity_sold,
+                    0 as total_revenue,
+                    0 as total_cost,
+                    0 as order_count,
+                    NULL as avg_price,
+                    0 as profit_margin,
+                    NULL as inventory_value,
+                    0 as active_days
+                FROM monthly_stock ms
+                WHERE NOT EXISTS (
+                    SELECT 1 FROM monthly_sales s2
+                    WHERE s2.pid = ms.pid
+                    AND s2.year = ms.year
+                    AND s2.month = ms.month
+                )
+            ) s
+            LEFT JOIN monthly_stock ms 
+                ON s.pid = ms.pid 
+                AND s.year = ms.year 
+                AND s.month = ms.month
+            JOIN base_products bp ON COALESCE(s.pid, ms.pid) = bp.pid
             UNION
             SELECT 
-                p.pid,
-                p.year,
-                p.month,
+                ms.pid,
+                ms.year,
+                ms.month,
                 0 as total_quantity_sold,
                 0 as total_revenue,
                 0 as total_cost,
                 0 as order_count,
-                p.stock_received,
-                p.stock_ordered,
+                ms.stock_received,
+                ms.stock_ordered,
                 0 as avg_price,
-                0 as profit_margin
-            FROM purchase_data p
-            LEFT JOIN sales_data s
-                ON p.pid = s.pid 
-                AND p.year = s.year 
-                AND p.month = s.month
-            WHERE s.pid IS NULL
+                0 as profit_margin,
+                bp.inventory_value,
+                0 as gmroi
+            FROM monthly_stock ms
+            JOIN base_products bp ON ms.pid = bp.pid
+            WHERE NOT EXISTS (
+                SELECT 1 FROM (
+                    SELECT * FROM monthly_sales
+                    UNION ALL
+                    SELECT 
+                        ms2.pid,
+                        ms2.year,
+                        ms2.month,
+                        0, 0, 0, 0, NULL, 0, NULL, 0
+                    FROM monthly_stock ms2
+                    WHERE NOT EXISTS (
+                        SELECT 1 FROM monthly_sales s2
+                        WHERE s2.pid = ms2.pid
+                        AND s2.year = ms2.year
+                        AND s2.month = ms2.month
+                    )
+                ) s
+                WHERE s.pid = ms.pid
+                AND s.year = ms.year
+                AND s.month = ms.month
+            )
             ON DUPLICATE KEY UPDATE
                 total_quantity_sold = VALUES(total_quantity_sold),
                 total_revenue = VALUES(total_revenue),
@@ -120,7 +205,9 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                 stock_received = VALUES(stock_received),
                 stock_ordered = VALUES(stock_ordered),
                 avg_price = VALUES(avg_price),
-                profit_margin = VALUES(profit_margin)
+                profit_margin = VALUES(profit_margin),
+                inventory_value = VALUES(inventory_value),
+                gmroi = VALUES(gmroi)
         `);
 
         processedCount = Math.floor(totalProducts * 0.60);
@@ -132,10 +219,20 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
 
         // Update with financial metrics
         await connection.query(`
@@ -147,7 +244,7 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                     MONTH(o.date) as month,
                     p.cost_price * p.stock_quantity as inventory_value,
                     SUM(o.quantity * (o.price - p.cost_price)) as gross_profit,
-                    COUNT(DISTINCT DATE(o.date)) as days_in_period
+                    COUNT(DISTINCT DATE(o.date)) as active_days
                 FROM products p
                 LEFT JOIN orders o ON p.pid = o.pid
                 WHERE o.canceled = false
@@ -156,12 +253,7 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
                 AND pta.year = fin.year 
                 AND pta.month = fin.month
             SET 
-                pta.inventory_value = COALESCE(fin.inventory_value, 0),
-                pta.gmroi = CASE 
-                    WHEN COALESCE(fin.inventory_value, 0) > 0 AND fin.days_in_period > 0 THEN 
-                        (COALESCE(fin.gross_profit, 0) * (365.0 / fin.days_in_period)) / COALESCE(fin.inventory_value, 0)
-                    ELSE 0 
-                END
+                pta.inventory_value = COALESCE(fin.inventory_value, 0)
         `);
 
         processedCount = Math.floor(totalProducts * 0.65);
@@ -173,11 +265,33 @@ async function calculateTimeAggregates(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        return processedCount;
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('time_aggregates', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders: 0,
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating time aggregates');
         throw error;
     } finally {

inventory-server/scripts/metrics/vendor-metrics.js

@@ -1,8 +1,12 @@
 const { outputProgress, formatElapsedTime, estimateRemaining, calculateRate, logError } = require('./utils/progress');
 const { getConnection } = require('./utils/db');
 
-async function calculateVendorMetrics(startTime, totalProducts, processedCount, isCancelled = false) {
+async function calculateVendorMetrics(startTime, totalProducts, processedCount = 0, isCancelled = false) {
     const connection = await getConnection();
+    let success = false;
+    let processedOrders = 0;
+    let processedPurchaseOrders = 0;
+    
     try {
         if (isCancelled) {
             outputProgress({
@@ -13,11 +17,37 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
                 elapsed: formatElapsedTime(startTime),
                 remaining: null,
                 rate: calculateRate(startTime, processedCount),
-                percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+                percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+                timing: {
+                    start_time: new Date(startTime).toISOString(),
+                    end_time: new Date().toISOString(),
+                    elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+                }
             });
-            return processedCount;
+            return {
+                processedProducts: processedCount,
+                processedOrders,
+                processedPurchaseOrders,
+                success
+            };
         }
 
+        // Get counts of records that will be processed
+        const [[orderCount], [poCount]] = await Promise.all([
+            connection.query(`
+                SELECT COUNT(*) as count 
+                FROM orders o 
+                WHERE o.canceled = false
+            `),
+            connection.query(`
+                SELECT COUNT(*) as count 
+                FROM purchase_orders po 
+                WHERE po.status != 0
+            `)
+        ]);
+        processedOrders = orderCount.count;
+        processedPurchaseOrders = poCount.count;
+
         outputProgress({
             status: 'running',
             operation: 'Starting vendor metrics calculation',
@@ -26,7 +56,12 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
         // First ensure all vendors exist in vendor_details
@@ -50,10 +85,20 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        if (isCancelled) return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders,
+            success
+        };
 
         // Now calculate vendor metrics
         await connection.query(`
@@ -68,6 +113,8 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
                 avg_order_value,
                 active_products,
                 total_products,
+                total_purchase_value,
+                avg_margin_percent,
                 status,
                 last_calculated_at
             )
@@ -76,7 +123,8 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
                     p.vendor,
                     SUM(o.quantity * o.price) as total_revenue,
                     COUNT(DISTINCT o.id) as total_orders,
-                    COUNT(DISTINCT p.pid) as active_products
+                    COUNT(DISTINCT p.pid) as active_products,
+                    SUM(o.quantity * (o.price - p.cost_price)) as total_margin
                 FROM products p
                 JOIN orders o ON p.pid = o.pid
                 WHERE o.canceled = false
@@ -91,7 +139,8 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
                     AVG(CASE 
                         WHEN po.receiving_status = 40 
                         THEN DATEDIFF(po.received_date, po.date) 
-                    END) as avg_lead_time_days
+                    END) as avg_lead_time_days,
+                    SUM(po.ordered * po.po_cost_price) as total_purchase_value
                 FROM products p
                 JOIN purchase_orders po ON p.pid = po.pid
                 WHERE po.date >= DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH)
@@ -127,6 +176,12 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
                 END as avg_order_value,
                 COALESCE(vs.active_products, 0) as active_products,
                 COALESCE(vpr.total_products, 0) as total_products,
+                COALESCE(vp.total_purchase_value, 0) as total_purchase_value,
+                CASE 
+                    WHEN vs.total_revenue > 0 
+                    THEN (vs.total_margin / vs.total_revenue) * 100 
+                    ELSE 0 
+                END as avg_margin_percent,
                 'active' as status,
                 NOW() as last_calculated_at
             FROM vendor_sales vs
@@ -143,6 +198,8 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
                 avg_order_value = VALUES(avg_order_value),
                 active_products = VALUES(active_products),
                 total_products = VALUES(total_products),
+                total_purchase_value = VALUES(total_purchase_value),
+                avg_margin_percent = VALUES(avg_margin_percent),
                 status = VALUES(status),
                 last_calculated_at = VALUES(last_calculated_at)
         `);
@@ -150,17 +207,155 @@ async function calculateVendorMetrics(startTime, totalProducts, processedCount,
         processedCount = Math.floor(totalProducts * 0.9);
         outputProgress({
             status: 'running',
-            operation: 'Vendor metrics calculated',
+            operation: 'Vendor metrics calculated, updating time-based metrics',
             current: processedCount,
             total: totalProducts,
             elapsed: formatElapsedTime(startTime),
             remaining: estimateRemaining(startTime, processedCount, totalProducts),
             rate: calculateRate(startTime, processedCount),
-            percentage: ((processedCount / totalProducts) * 100).toFixed(1)
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
         });
 
-        return processedCount;
+        if (isCancelled) return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders,
+            success
+        };
+
+        // Calculate time-based metrics
+        await connection.query(`
+            INSERT INTO vendor_time_metrics (
+                vendor,
+                year,
+                month,
+                total_orders,
+                late_orders,
+                avg_lead_time_days,
+                total_purchase_value,
+                total_revenue,
+                avg_margin_percent
+            )
+            WITH monthly_orders AS (
+                SELECT 
+                    p.vendor,
+                    YEAR(o.date) as year,
+                    MONTH(o.date) as month,
+                    COUNT(DISTINCT o.id) as total_orders,
+                    SUM(o.quantity * o.price) as total_revenue,
+                    SUM(o.quantity * (o.price - p.cost_price)) as total_margin
+                FROM products p
+                JOIN orders o ON p.pid = o.pid
+                WHERE o.canceled = false
+                    AND o.date >= DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH)
+                    AND p.vendor IS NOT NULL
+                GROUP BY p.vendor, YEAR(o.date), MONTH(o.date)
+            ),
+            monthly_po AS (
+                SELECT 
+                    p.vendor,
+                    YEAR(po.date) as year,
+                    MONTH(po.date) as month,
+                    COUNT(DISTINCT po.id) as total_po,
+                    COUNT(DISTINCT CASE 
+                        WHEN po.receiving_status = 40 AND po.received_date > po.expected_date 
+                        THEN po.id 
+                    END) as late_orders,
+                    AVG(CASE 
+                        WHEN po.receiving_status = 40 
+                        THEN DATEDIFF(po.received_date, po.date)
+                    END) as avg_lead_time_days,
+                    SUM(po.ordered * po.po_cost_price) as total_purchase_value
+                FROM products p
+                JOIN purchase_orders po ON p.pid = po.pid
+                WHERE po.date >= DATE_SUB(CURRENT_DATE, INTERVAL 12 MONTH)
+                    AND p.vendor IS NOT NULL
+                GROUP BY p.vendor, YEAR(po.date), MONTH(po.date)
+            )
+            SELECT 
+                mo.vendor,
+                mo.year,
+                mo.month,
+                COALESCE(mp.total_po, 0) as total_orders,
+                COALESCE(mp.late_orders, 0) as late_orders,
+                COALESCE(mp.avg_lead_time_days, 0) as avg_lead_time_days,
+                COALESCE(mp.total_purchase_value, 0) as total_purchase_value,
+                mo.total_revenue,
+                CASE 
+                    WHEN mo.total_revenue > 0 
+                    THEN (mo.total_margin / mo.total_revenue) * 100 
+                    ELSE 0 
+                END as avg_margin_percent
+            FROM monthly_orders mo
+            LEFT JOIN monthly_po mp ON mo.vendor = mp.vendor 
+                AND mo.year = mp.year 
+                AND mo.month = mp.month
+            UNION
+            SELECT 
+                mp.vendor,
+                mp.year,
+                mp.month,
+                mp.total_po as total_orders,
+                mp.late_orders,
+                mp.avg_lead_time_days,
+                mp.total_purchase_value,
+                0 as total_revenue,
+                0 as avg_margin_percent
+            FROM monthly_po mp
+            LEFT JOIN monthly_orders mo ON mp.vendor = mo.vendor 
+                AND mp.year = mo.year 
+                AND mp.month = mo.month
+            WHERE mo.vendor IS NULL
+            ON DUPLICATE KEY UPDATE
+                total_orders = VALUES(total_orders),
+                late_orders = VALUES(late_orders),
+                avg_lead_time_days = VALUES(avg_lead_time_days),
+                total_purchase_value = VALUES(total_purchase_value),
+                total_revenue = VALUES(total_revenue),
+                avg_margin_percent = VALUES(avg_margin_percent)
+        `);
+
+        processedCount = Math.floor(totalProducts * 0.95);
+        outputProgress({
+            status: 'running',
+            operation: 'Time-based vendor metrics calculated',
+            current: processedCount,
+            total: totalProducts,
+            elapsed: formatElapsedTime(startTime),
+            remaining: estimateRemaining(startTime, processedCount, totalProducts),
+            rate: calculateRate(startTime, processedCount),
+            percentage: ((processedCount / totalProducts) * 100).toFixed(1),
+            timing: {
+                start_time: new Date(startTime).toISOString(),
+                end_time: new Date().toISOString(),
+                elapsed_seconds: Math.round((Date.now() - startTime) / 1000)
+            }
+        });
+
+        // If we get here, everything completed successfully
+        success = true;
+        
+        // Update calculate_status
+        await connection.query(`
+            INSERT INTO calculate_status (module_name, last_calculation_timestamp)
+            VALUES ('vendor_metrics', NOW())
+            ON DUPLICATE KEY UPDATE last_calculation_timestamp = NOW()
+        `);
+
+        return {
+            processedProducts: processedCount,
+            processedOrders,
+            processedPurchaseOrders,
+            success
+        };
+
     } catch (error) {
+        success = false;
         logError(error, 'Error calculating vendor metrics');
         throw error;
     } finally {

inventory-server/scripts/reset-db.js

@@ -1,4 +1,4 @@
-const mysql = require('mysql2/promise');
+const { Client } = require('pg');
 const path = require('path');
 const dotenv = require('dotenv');
 const fs = require('fs');
@@ -10,7 +10,7 @@ const dbConfig = {
     user: process.env.DB_USER,
     password: process.env.DB_PASSWORD,
     database: process.env.DB_NAME,
-    multipleStatements: true
+    port: process.env.DB_PORT || 5432
 };
 
 // Helper function to output progress in JSON format
@@ -120,30 +120,26 @@ async function resetDatabase() {
         }
     });
 
-    const connection = await mysql.createConnection(dbConfig);
+    const client = new Client(dbConfig);
+    await client.connect();
     
     try {
-        // Check MySQL privileges
+        // Check PostgreSQL version and user
         outputProgress({
-            operation: 'Checking privileges',
-            message: 'Verifying MySQL user privileges...'
+            operation: 'Checking database',
+            message: 'Verifying PostgreSQL version and user privileges...'
         });
 
-        const [grants] = await connection.query('SHOW GRANTS');
-        outputProgress({
-            operation: 'User privileges',
-            message: {
-                grants: grants.map(g => Object.values(g)[0])
-            }
-        });
-
-        // Enable warnings as errors
-        await connection.query('SET SESSION sql_notes = 1');
+        const versionResult = await client.query('SELECT version()');
+        const userResult = await client.query('SELECT current_user, current_database()');
         
-        // Log database config (without sensitive info)
         outputProgress({
-            operation: 'Database config',
-            message: `Using database: ${dbConfig.database} on host: ${dbConfig.host}`
+            operation: 'Database info',
+            message: {
+                version: versionResult.rows[0].version,
+                user: userResult.rows[0].current_user,
+                database: userResult.rows[0].current_database
+            }
         });
 
         // Get list of all tables in the current database
@@ -152,14 +148,14 @@ async function resetDatabase() {
             message: 'Retrieving all table names...'
         });
 
-        const [tables] = await connection.query(`
-            SELECT GROUP_CONCAT(table_name) as tables 
-            FROM information_schema.tables 
-            WHERE table_schema = DATABASE()
-            AND table_name NOT IN ('users', 'import_history')
+        const tablesResult = await client.query(`
+            SELECT string_agg(tablename, ', ') as tables
+            FROM pg_tables
+            WHERE schemaname = 'public'
+            AND tablename NOT IN ('users', 'calculate_history', 'import_history');
         `);
 
-        if (!tables[0].tables) {
+        if (!tablesResult.rows[0].tables) {
             outputProgress({
                 operation: 'No tables found',
                 message: 'Database is already empty'
@@ -170,20 +166,73 @@ async function resetDatabase() {
                 message: 'Dropping all existing tables...'
             });
 
-            await connection.query('SET FOREIGN_KEY_CHECKS = 0');
-            const dropQuery = `
-                DROP TABLE IF EXISTS 
-                ${tables[0].tables
-                    .split(',')
-                    .filter(table => table !== 'users')
-                    .map(table => '`' + table + '`')
-                    .join(', ')}
-            `;
-            await connection.query(dropQuery);
-            await connection.query('SET FOREIGN_KEY_CHECKS = 1');
+            // Disable triggers/foreign key checks
+            await client.query('SET session_replication_role = \'replica\';');
+            
+            // Drop all tables except users
+            const tables = tablesResult.rows[0].tables.split(', ');
+            for (const table of tables) {
+                if (!['users'].includes(table)) {
+                    await client.query(`DROP TABLE IF EXISTS "${table}" CASCADE`);
+                }
+            }
+
+            // Only drop types if we're not preserving history tables
+            const historyTablesExist = await client.query(`
+                SELECT EXISTS (
+                    SELECT FROM pg_tables 
+                    WHERE schemaname = 'public' 
+                    AND tablename IN ('calculate_history', 'import_history')
+                );
+            `);
+
+            if (!historyTablesExist.rows[0].exists) {
+                await client.query('DROP TYPE IF EXISTS calculation_status CASCADE;');
+                await client.query('DROP TYPE IF EXISTS module_name CASCADE;');
+            }
+            
+            // Re-enable triggers/foreign key checks
+            await client.query('SET session_replication_role = \'origin\';');
         }
 
-        // Read and execute main schema (core tables)
+        // Create enum types if they don't exist
+        outputProgress({
+            operation: 'Creating enum types',
+            message: 'Setting up required enum types...'
+        });
+
+        // Check if types exist before creating
+        const typesExist = await client.query(`
+            SELECT EXISTS (
+                SELECT 1 FROM pg_type 
+                WHERE typname = 'calculation_status'
+            ) as calc_status_exists,
+            EXISTS (
+                SELECT 1 FROM pg_type 
+                WHERE typname = 'module_name'
+            ) as module_name_exists;
+        `);
+
+        if (!typesExist.rows[0].calc_status_exists) {
+            await client.query(`CREATE TYPE calculation_status AS ENUM ('running', 'completed', 'failed', 'cancelled')`);
+        }
+
+        if (!typesExist.rows[0].module_name_exists) {
+            await client.query(`
+                CREATE TYPE module_name AS ENUM (
+                    'product_metrics',
+                    'time_aggregates',
+                    'financial_metrics',
+                    'vendor_metrics',
+                    'category_metrics',
+                    'brand_metrics',
+                    'sales_forecasts',
+                    'abc_classification'
+                )
+            `);
+        }
+
+        // Read and execute main schema first (core tables)
         outputProgress({
             operation: 'Running database setup',
             message: 'Creating core tables...'
@@ -223,35 +272,24 @@ async function resetDatabase() {
         for (let i = 0; i < statements.length; i++) {
             const stmt = statements[i];
             try {
-                const [result, fields] = await connection.query(stmt);
-                
-                // Check for warnings
-                const [warnings] = await connection.query('SHOW WARNINGS');
-                if (warnings && warnings.length > 0) {
-                    outputProgress({
-                        status: 'warning',
-                        operation: 'SQL Warning',
-                        statement: i + 1,
-                        warnings: warnings
-                    });
-                }
+                const result = await client.query(stmt);
                 
                 // Verify if table was created (if this was a CREATE TABLE statement)
                 if (stmt.trim().toLowerCase().startsWith('create table')) {
-                    const tableName = stmt.match(/create\s+table\s+(?:if\s+not\s+exists\s+)?`?(\w+)`?/i)?.[1];
+                    const tableName = stmt.match(/create\s+table\s+(?:if\s+not\s+exists\s+)?["]?(\w+)["]?/i)?.[1];
                     if (tableName) {
-                        const [tableExists] = await connection.query(`
+                        const tableExists = await client.query(`
                             SELECT COUNT(*) as count 
                             FROM information_schema.tables 
-                            WHERE table_schema = DATABASE() 
-                            AND table_name = ?
+                            WHERE table_schema = 'public' 
+                            AND table_name = $1
                         `, [tableName]);
                         
                         outputProgress({
                             operation: 'Table Creation Verification',
                             message: {
                                 table: tableName,
-                                exists: tableExists[0].count > 0
+                                exists: tableExists.rows[0].count > 0
                             }
                         });
                     }
@@ -263,7 +301,7 @@ async function resetDatabase() {
                         statement: i + 1,
                         total: statements.length,
                         preview: stmt.substring(0, 100) + (stmt.length > 100 ? '...' : ''),
-                        affectedRows: result.affectedRows
+                        rowCount: result.rowCount
                     }
                 });
             } catch (sqlError) {
@@ -271,8 +309,6 @@ async function resetDatabase() {
                     status: 'error',
                     operation: 'SQL Error',
                     error: sqlError.message,
-                    sqlState: sqlError.sqlState,
-                    errno: sqlError.errno,
                     statement: stmt,
                     statementNumber: i + 1
                 });
@@ -280,66 +316,12 @@ async function resetDatabase() {
             }
         }
 
-        // List all tables in the database after schema execution
-        outputProgress({
-            operation: 'Debug database',
-            message: {
-                currentDatabase: (await connection.query('SELECT DATABASE() as db'))[0][0].db
-            }
-        });
-
-        const [allTables] = await connection.query(`
-            SELECT 
-                table_schema,
-                table_name,
-                engine,
-                create_time,
-                table_rows
+        // Verify core tables were created
+        const existingTables = (await client.query(`
+            SELECT table_name
             FROM information_schema.tables 
-            WHERE table_schema = DATABASE()
-        `);
-
-        if (allTables.length === 0) {
-            outputProgress({
-                operation: 'Warning',
-                message: 'No tables found in database after schema execution'
-            });
-        } else {
-            outputProgress({
-                operation: 'Tables after schema execution',
-                message: {
-                    count: allTables.length,
-                    tables: allTables.map(t => ({
-                        schema: t.table_schema,
-                        name: t.table_name,
-                        engine: t.engine,
-                        created: t.create_time,
-                        rows: t.table_rows
-                    }))
-                }
-            });
-        }
-
-        // Also check table status
-        const [tableStatus] = await connection.query('SHOW TABLE STATUS');
-        outputProgress({
-            operation: 'Table Status',
-            message: {
-                tables: tableStatus.map(t => ({
-                    name: t.Name,
-                    engine: t.Engine,
-                    version: t.Version,
-                    rowFormat: t.Row_format,
-                    rows: t.Rows,
-                    createTime: t.Create_time,
-                    updateTime: t.Update_time
-                }))
-            }
-        });
-
-        // Verify core tables were created using SHOW TABLES
-        const [showTables] = await connection.query('SHOW TABLES');
-        const existingTables = showTables.map(t => Object.values(t)[0]);
+            WHERE table_schema = 'public'
+        `)).rows.map(t => t.table_name);
 
         outputProgress({
             operation: 'Core tables verification',
@@ -359,22 +341,12 @@ async function resetDatabase() {
             );
         }
 
-        // Verify all core tables use InnoDB
-        const [engineStatus] = await connection.query('SHOW TABLE STATUS WHERE Name IN (?)', [CORE_TABLES]);
-        const nonInnoDBTables = engineStatus.filter(t => t.Engine !== 'InnoDB');
-        
-        if (nonInnoDBTables.length > 0) {
-            throw new Error(
-                `Tables using non-InnoDB engine: ${nonInnoDBTables.map(t => t.Name).join(', ')}`
-            );
-        }
-
         outputProgress({
             operation: 'Core tables created',
             message: `Successfully created tables: ${CORE_TABLES.join(', ')}`
         });
 
-        // Read and execute config schema
+        // Now read and execute config schema (since core tables exist)
         outputProgress({
             operation: 'Running config setup',
             message: 'Creating configuration tables...'
@@ -400,18 +372,7 @@ async function resetDatabase() {
         for (let i = 0; i < configStatements.length; i++) {
             const stmt = configStatements[i];
             try {
-                const [result, fields] = await connection.query(stmt);
-                
-                // Check for warnings
-                const [warnings] = await connection.query('SHOW WARNINGS');
-                if (warnings && warnings.length > 0) {
-                    outputProgress({
-                        status: 'warning',
-                        operation: 'Config SQL Warning',
-                        statement: i + 1,
-                        warnings: warnings
-                    });
-                }
+                const result = await client.query(stmt);
                 
                 outputProgress({
                     operation: 'Config SQL Progress',
@@ -419,7 +380,7 @@ async function resetDatabase() {
                         statement: i + 1,
                         total: configStatements.length,
                         preview: stmt.substring(0, 100) + (stmt.length > 100 ? '...' : ''),
-                        affectedRows: result.affectedRows
+                        rowCount: result.rowCount
                     }
                 });
             } catch (sqlError) {
@@ -427,8 +388,6 @@ async function resetDatabase() {
                     status: 'error',
                     operation: 'Config SQL Error',
                     error: sqlError.message,
-                    sqlState: sqlError.sqlState,
-                    errno: sqlError.errno,
                     statement: stmt,
                     statementNumber: i + 1
                 });
@@ -436,33 +395,6 @@ async function resetDatabase() {
             }
         }
 
-        // Verify config tables were created
-        const [showConfigTables] = await connection.query('SHOW TABLES');
-        const existingConfigTables = showConfigTables.map(t => Object.values(t)[0]);
-
-        outputProgress({
-            operation: 'Config tables verification',
-            message: {
-                found: existingConfigTables,
-                expected: CONFIG_TABLES
-            }
-        });
-
-        const missingConfigTables = CONFIG_TABLES.filter(
-            t => !existingConfigTables.includes(t)
-        );
-
-        if (missingConfigTables.length > 0) {
-            throw new Error(
-                `Failed to create config tables: ${missingConfigTables.join(', ')}`
-            );
-        }
-
-        outputProgress({
-            operation: 'Config tables created',
-            message: `Successfully created tables: ${CONFIG_TABLES.join(', ')}`
-        });
-
         // Read and execute metrics schema (metrics tables)
         outputProgress({
             operation: 'Running metrics setup',
@@ -489,18 +421,7 @@ async function resetDatabase() {
         for (let i = 0; i < metricsStatements.length; i++) {
             const stmt = metricsStatements[i];
             try {
-                const [result, fields] = await connection.query(stmt);
-                
-                // Check for warnings
-                const [warnings] = await connection.query('SHOW WARNINGS');
-                if (warnings && warnings.length > 0) {
-                    outputProgress({
-                        status: 'warning',
-                        operation: 'Metrics SQL Warning',
-                        statement: i + 1,
-                        warnings: warnings
-                    });
-                }
+                const result = await client.query(stmt);
                 
                 outputProgress({
                     operation: 'Metrics SQL Progress',
@@ -508,7 +429,7 @@ async function resetDatabase() {
                         statement: i + 1,
                         total: metricsStatements.length,
                         preview: stmt.substring(0, 100) + (stmt.length > 100 ? '...' : ''),
-                        affectedRows: result.affectedRows
+                        rowCount: result.rowCount
                     }
                 });
             } catch (sqlError) {
@@ -516,8 +437,6 @@ async function resetDatabase() {
                     status: 'error',
                     operation: 'Metrics SQL Error',
                     error: sqlError.message,
-                    sqlState: sqlError.sqlState,
-                    errno: sqlError.errno,
                     statement: stmt,
                     statementNumber: i + 1
                 });
@@ -539,9 +458,19 @@ async function resetDatabase() {
         });
         process.exit(1);
     } finally {
-        await connection.end();
+        await client.end();
     }
 }
 
-// Run the reset
-resetDatabase(); 
+// Export if required as a module
+if (typeof module !== 'undefined' && module.exports) {
+    module.exports = resetDatabase;
+}
+
+// Run if called directly
+if (require.main === module) {
+    resetDatabase().catch(error => {
+        console.error('Error:', error);
+        process.exit(1);
+    });
+} 

inventory-server/scripts/reset-metrics.js

@@ -1,4 +1,4 @@
-const mysql = require('mysql2/promise');
+const { Client } = require('pg');
 const path = require('path');
 const fs = require('fs');
 require('dotenv').config({ path: path.resolve(__dirname, '../.env') });
@@ -8,7 +8,7 @@ const dbConfig = {
     user: process.env.DB_USER,
     password: process.env.DB_PASSWORD,
     database: process.env.DB_NAME,
-    multipleStatements: true
+    port: process.env.DB_PORT || 5432
 };
 
 function outputProgress(data) {
@@ -34,8 +34,8 @@ const METRICS_TABLES = [
     'sales_forecasts',
     'temp_purchase_metrics',
     'temp_sales_metrics',
-    'vendor_metrics', //before vendor_details for foreign key
-    'vendor_time_metrics', //before vendor_details for foreign key
+    'vendor_metrics',
+    'vendor_time_metrics',
     'vendor_details'
 ];
 
@@ -90,31 +90,31 @@ function splitSQLStatements(sql) {
 }
 
 async function resetMetrics() {
-    let connection;
+    let client;
     try {
         outputProgress({
             operation: 'Starting metrics reset',
             message: 'Connecting to database...'
         });
 
-        connection = await mysql.createConnection(dbConfig);
-        await connection.beginTransaction();
+        client = new Client(dbConfig);
+        await client.connect();
 
         // First verify current state
-        const [initialTables] = await connection.query(`
-            SELECT TABLE_NAME as name
-            FROM information_schema.tables 
-            WHERE TABLE_SCHEMA = DATABASE()
-            AND TABLE_NAME IN (?)
+        const initialTables = await client.query(`
+            SELECT tablename as name
+            FROM pg_tables 
+            WHERE schemaname = 'public'
+            AND tablename = ANY($1)
         `, [METRICS_TABLES]);
 
         outputProgress({
             operation: 'Initial state',
-            message: `Found ${initialTables.length} existing metrics tables: ${initialTables.map(t => t.name).join(', ')}`
+            message: `Found ${initialTables.rows.length} existing metrics tables: ${initialTables.rows.map(t => t.name).join(', ')}`
         });
 
         // Disable foreign key checks at the start
-        await connection.query('SET FOREIGN_KEY_CHECKS = 0');
+        await client.query('SET session_replication_role = \'replica\'');
 
         // Drop all metrics tables in reverse order to handle dependencies
         outputProgress({
@@ -124,17 +124,17 @@ async function resetMetrics() {
 
         for (const table of [...METRICS_TABLES].reverse()) {
             try {
-                await connection.query(`DROP TABLE IF EXISTS ${table}`);
+                await client.query(`DROP TABLE IF EXISTS "${table}" CASCADE`);
                 
                 // Verify the table was actually dropped
-                const [checkDrop] = await connection.query(`
+                const checkDrop = await client.query(`
                     SELECT COUNT(*) as count 
-                    FROM information_schema.tables 
-                    WHERE TABLE_SCHEMA = DATABASE() 
-                    AND TABLE_NAME = ?
+                    FROM pg_tables 
+                    WHERE schemaname = 'public' 
+                    AND tablename = $1
                 `, [table]);
                 
-                if (checkDrop[0].count > 0) {
+                if (parseInt(checkDrop.rows[0].count) > 0) {
                     throw new Error(`Failed to drop table ${table} - table still exists`);
                 }
 
@@ -153,15 +153,15 @@ async function resetMetrics() {
         }
 
         // Verify all tables were dropped
-        const [afterDrop] = await connection.query(`
-            SELECT TABLE_NAME as name
-            FROM information_schema.tables 
-            WHERE TABLE_SCHEMA = DATABASE()
-            AND TABLE_NAME IN (?)
+        const afterDrop = await client.query(`
+            SELECT tablename as name
+            FROM pg_tables 
+            WHERE schemaname = 'public'
+            AND tablename = ANY($1)
         `, [METRICS_TABLES]);
 
-        if (afterDrop.length > 0) {
-            throw new Error(`Failed to drop all tables. Remaining tables: ${afterDrop.map(t => t.name).join(', ')}`);
+        if (afterDrop.rows.length > 0) {
+            throw new Error(`Failed to drop all tables. Remaining tables: ${afterDrop.rows.map(t => t.name).join(', ')}`);
         }
 
         // Read metrics schema
@@ -187,39 +187,26 @@ async function resetMetrics() {
         for (let i = 0; i < statements.length; i++) {
             const stmt = statements[i];
             try {
-                await connection.query(stmt);
-                
-                // Check for warnings
-                const [warnings] = await connection.query('SHOW WARNINGS');
-                if (warnings && warnings.length > 0) {
-                    outputProgress({
-                        status: 'warning',
-                        operation: 'SQL Warning',
-                        message: {
-                            statement: i + 1,
-                            warnings: warnings
-                        }
-                    });
-                }
+                const result = await client.query(stmt);
 
                 // If this is a CREATE TABLE statement, verify the table was created
                 if (stmt.trim().toLowerCase().startsWith('create table')) {
-                    const tableName = stmt.match(/create\s+table\s+(?:if\s+not\s+exists\s+)?`?(\w+)`?/i)?.[1];
+                    const tableName = stmt.match(/create\s+table\s+(?:if\s+not\s+exists\s+)?["]?(\w+)["]?/i)?.[1];
                     if (tableName) {
-                        const [checkCreate] = await connection.query(`
-                            SELECT TABLE_NAME as name, CREATE_TIME as created
-                            FROM information_schema.tables 
-                            WHERE TABLE_SCHEMA = DATABASE() 
-                            AND TABLE_NAME = ?
+                        const checkCreate = await client.query(`
+                            SELECT tablename as name
+                            FROM pg_tables 
+                            WHERE schemaname = 'public' 
+                            AND tablename = $1
                         `, [tableName]);
                         
-                        if (checkCreate.length === 0) {
+                        if (checkCreate.rows.length === 0) {
                             throw new Error(`Failed to create table ${tableName} - table does not exist after CREATE statement`);
                         }
 
                         outputProgress({
                             operation: 'Table created',
-                            message: `Successfully created table: ${tableName} at ${checkCreate[0].created}`
+                            message: `Successfully created table: ${tableName}`
                         });
                     }
                 }
@@ -229,7 +216,8 @@ async function resetMetrics() {
                     message: {
                         statement: i + 1,
                         total: statements.length,
-                        preview: stmt.substring(0, 100) + (stmt.length > 100 ? '...' : '')
+                        preview: stmt.substring(0, 100) + (stmt.length > 100 ? '...' : ''),
+                        rowCount: result.rowCount
                     }
                 });
             } catch (sqlError) {
@@ -238,8 +226,6 @@ async function resetMetrics() {
                     operation: 'SQL Error',
                     message: {
                         error: sqlError.message,
-                        sqlState: sqlError.sqlState,
-                        errno: sqlError.errno,
                         statement: stmt,
                         statementNumber: i + 1
                     }
@@ -249,7 +235,7 @@ async function resetMetrics() {
         }
 
         // Re-enable foreign key checks after all tables are created
-        await connection.query('SET FOREIGN_KEY_CHECKS = 1');
+        await client.query('SET session_replication_role = \'origin\'');
 
         // Verify metrics tables were created
         outputProgress({
@@ -257,37 +243,36 @@ async function resetMetrics() {
             message: 'Checking all metrics tables were created...'
         });
 
-        const [metricsTablesResult] = await connection.query(`
-            SELECT 
-                TABLE_NAME as name, 
-                TABLE_ROWS as \`rows\`,
-                CREATE_TIME as created
-            FROM information_schema.tables 
-            WHERE TABLE_SCHEMA = DATABASE()
-            AND TABLE_NAME IN (?)
+        const metricsTablesResult = await client.query(`
+            SELECT tablename as name
+            FROM pg_tables 
+            WHERE schemaname = 'public'
+            AND tablename = ANY($1)
         `, [METRICS_TABLES]);
 
         outputProgress({
             operation: 'Tables found',
-            message: `Found ${metricsTablesResult.length} tables: ${metricsTablesResult.map(t => 
-                `${t.name} (created: ${t.created})`
-            ).join(', ')}`
+            message: `Found ${metricsTablesResult.rows.length} tables: ${metricsTablesResult.rows.map(t => t.name).join(', ')}`
         });
 
-        const existingMetricsTables = metricsTablesResult.map(t => t.name);
+        const existingMetricsTables = metricsTablesResult.rows.map(t => t.name);
         const missingMetricsTables = METRICS_TABLES.filter(t => !existingMetricsTables.includes(t));
 
         if (missingMetricsTables.length > 0) {
             // Do one final check of the actual tables
-            const [finalCheck] = await connection.query('SHOW TABLES');
+            const finalCheck = await client.query(`
+                SELECT tablename as name
+                FROM pg_tables 
+                WHERE schemaname = 'public'
+            `);
             outputProgress({
                 operation: 'Final table check',
-                message: `All database tables: ${finalCheck.map(t => Object.values(t)[0]).join(', ')}`
+                message: `All database tables: ${finalCheck.rows.map(t => t.name).join(', ')}`
             });
             throw new Error(`Failed to create metrics tables: ${missingMetricsTables.join(', ')}`);
         }
 
-        await connection.commit();
+        await client.query('COMMIT');
         
         outputProgress({
             status: 'complete',
@@ -302,17 +287,17 @@ async function resetMetrics() {
             stack: error.stack
         });
         
-        if (connection) {
-            await connection.rollback();
+        if (client) {
+            await client.query('ROLLBACK');
             // Make sure to re-enable foreign key checks even if there's an error
-            await connection.query('SET FOREIGN_KEY_CHECKS = 1').catch(() => {});
+            await client.query('SET session_replication_role = \'origin\'').catch(() => {});
         }
         throw error;
     } finally {
-        if (connection) {
+        if (client) {
             // One final attempt to ensure foreign key checks are enabled
-            await connection.query('SET FOREIGN_KEY_CHECKS = 1').catch(() => {});
-            await connection.end();
+            await client.query('SET session_replication_role = \'origin\'').catch(() => {});
+            await client.end();
         }
     }
 }

inventory-server/src/routes/csv.js

@@ -2,6 +2,7 @@ const express = require('express');
 const router = express.Router();
 const { spawn } = require('child_process');
 const path = require('path');
+const db = require('../utils/db');
 
 // Debug middleware MUST be first
 router.use((req, res, next) => {
@@ -9,9 +10,11 @@ router.use((req, res, next) => {
     next();
 });
 
-// Store active import process and its progress
+// Store active processes and their progress
 let activeImport = null;
 let importProgress = null;
+let activeFullUpdate = null;
+let activeFullReset = null;
 
 // SSE clients for progress updates
 const updateClients = new Set();
@@ -19,17 +22,16 @@ const importClients = new Set();
 const resetClients = new Set();
 const resetMetricsClients = new Set();
 const calculateMetricsClients = new Set();
+const fullUpdateClients = new Set();
+const fullResetClients = new Set();
 
 // Helper to send progress to specific clients
-function sendProgressToClients(clients, progress) {
-    const data = typeof progress === 'string' ? { progress } : progress;
-    
-    // Ensure we have a status field
-    if (!data.status) {
-        data.status = 'running';
-    }
-    
-    const message = `data: ${JSON.stringify(data)}\n\n`;
+function sendProgressToClients(clients, data) {
+    // If data is a string, send it directly
+    // If it's an object, convert it to JSON
+    const message = typeof data === 'string' 
+        ? `data: ${data}\n\n`
+        : `data: ${JSON.stringify(data)}\n\n`;
     
     clients.forEach(client => {
         try {
@@ -45,115 +47,149 @@ function sendProgressToClients(clients, progress) {
     });
 }
 
+// Helper to run a script and stream progress
+function runScript(scriptPath, type, clients) {
+    return new Promise((resolve, reject) => {
+        // Kill any existing process of this type
+        let activeProcess;
+        switch (type) {
+            case 'update':
+                if (activeFullUpdate) {
+                    try { activeFullUpdate.kill(); } catch (e) { }
+                }
+                activeProcess = activeFullUpdate;
+                break;
+            case 'reset':
+                if (activeFullReset) {
+                    try { activeFullReset.kill(); } catch (e) { }
+                }
+                activeProcess = activeFullReset;
+                break;
+        }
+
+        const child = spawn('node', [scriptPath], {
+            stdio: ['inherit', 'pipe', 'pipe']
+        });
+
+        switch (type) {
+            case 'update':
+                activeFullUpdate = child;
+                break;
+            case 'reset':
+                activeFullReset = child;
+                break;
+        }
+
+        let output = '';
+
+        child.stdout.on('data', (data) => {
+            const text = data.toString();
+            output += text;
+            
+            // Split by lines to handle multiple JSON outputs
+            const lines = text.split('\n');
+            lines.filter(line => line.trim()).forEach(line => {
+                try {
+                    // Try to parse as JSON but don't let it affect the display
+                    const jsonData = JSON.parse(line);
+                    // Only end the process if we get a final status
+                    if (jsonData.status === 'complete' || jsonData.status === 'error' || jsonData.status === 'cancelled') {
+                        if (jsonData.status === 'complete' && !jsonData.operation?.includes('complete')) {
+                            // Don't close for intermediate completion messages
+                            sendProgressToClients(clients, line);
+                            return;
+                        }
+                        // Close only on final completion/error/cancellation
+                        switch (type) {
+                            case 'update':
+                                activeFullUpdate = null;
+                                break;
+                            case 'reset':
+                                activeFullReset = null;
+                                break;
+                        }
+                        if (jsonData.status === 'error') {
+                            reject(new Error(jsonData.error || 'Unknown error'));
+                        } else {
+                            resolve({ output });
+                        }
+                    }
+                } catch (e) {
+                    // Not JSON, just display as is
+                }
+                // Always send the raw line
+                sendProgressToClients(clients, line);
+            });
+        });
+
+        child.stderr.on('data', (data) => {
+            const text = data.toString();
+            console.error(text);
+            // Send stderr output directly too
+            sendProgressToClients(clients, text);
+        });
+
+        child.on('close', (code) => {
+            switch (type) {
+                case 'update':
+                    activeFullUpdate = null;
+                    break;
+                case 'reset':
+                    activeFullReset = null;
+                    break;
+            }
+
+            if (code !== 0) {
+                const error = `Script ${scriptPath} exited with code ${code}`;
+                sendProgressToClients(clients, error);
+                reject(new Error(error));
+            }
+            // Don't resolve here - let the completion message from the script trigger the resolve
+        });
+
+        child.on('error', (err) => {
+            switch (type) {
+                case 'update':
+                    activeFullUpdate = null;
+                    break;
+                case 'reset':
+                    activeFullReset = null;
+                    break;
+            }
+            sendProgressToClients(clients, err.message);
+            reject(err);
+        });
+    });
+}
+
 // Progress endpoints
-router.get('/update/progress', (req, res) => {
-    res.writeHead(200, {
-        'Content-Type': 'text/event-stream',
-        'Cache-Control': 'no-cache',
-        'Connection': 'keep-alive',
-        'Access-Control-Allow-Origin': req.headers.origin || '*',
-        'Access-Control-Allow-Credentials': 'true'
-    });
-
-    // Send an initial message to test the connection
-    res.write('data: {"status":"running","operation":"Initializing connection..."}\n\n');
-
-    // Add this client to the update set
-    updateClients.add(res);
-
-    // Remove client when connection closes
-    req.on('close', () => {
-        updateClients.delete(res);
-    });
-});
-
-router.get('/import/progress', (req, res) => {
-    res.writeHead(200, {
-        'Content-Type': 'text/event-stream',
-        'Cache-Control': 'no-cache',
-        'Connection': 'keep-alive',
-        'Access-Control-Allow-Origin': req.headers.origin || '*',
-        'Access-Control-Allow-Credentials': 'true'
-    });
-
-    // Send an initial message to test the connection
-    res.write('data: {"status":"running","operation":"Initializing connection..."}\n\n');
-
-    // Add this client to the import set
-    importClients.add(res);
-
-    // Remove client when connection closes
-    req.on('close', () => {
-        importClients.delete(res);
-    });
-});
-
-router.get('/reset/progress', (req, res) => {
-    res.writeHead(200, {
-        'Content-Type': 'text/event-stream',
-        'Cache-Control': 'no-cache',
-        'Connection': 'keep-alive',
-        'Access-Control-Allow-Origin': req.headers.origin || '*',
-        'Access-Control-Allow-Credentials': 'true'
-    });
-
-    // Send an initial message to test the connection
-    res.write('data: {"status":"running","operation":"Initializing connection..."}\n\n');
-
-    // Add this client to the reset set
-    resetClients.add(res);
-
-    // Remove client when connection closes
-    req.on('close', () => {
-        resetClients.delete(res);
-    });
-});
-
-// Add reset-metrics progress endpoint
-router.get('/reset-metrics/progress', (req, res) => {
-    res.writeHead(200, {
-        'Content-Type': 'text/event-stream',
-        'Cache-Control': 'no-cache',
-        'Connection': 'keep-alive',
-        'Access-Control-Allow-Origin': req.headers.origin || '*',
-        'Access-Control-Allow-Credentials': 'true'
-    });
-
-    // Send an initial message to test the connection
-    res.write('data: {"status":"running","operation":"Initializing connection..."}\n\n');
-
-    // Add this client to the reset-metrics set
-    resetMetricsClients.add(res);
-
-    // Remove client when connection closes
-    req.on('close', () => {
-        resetMetricsClients.delete(res);
-    });
-});
-
-// Add calculate-metrics progress endpoint
-router.get('/calculate-metrics/progress', (req, res) => {
-    res.writeHead(200, {
-        'Content-Type': 'text/event-stream',
-        'Cache-Control': 'no-cache',
-        'Connection': 'keep-alive',
-        'Access-Control-Allow-Origin': req.headers.origin || '*',
-        'Access-Control-Allow-Credentials': 'true'
-    });
-
-    // Send current progress if it exists
-    if (importProgress) {
-        res.write(`data: ${JSON.stringify(importProgress)}\n\n`);
-    } else {
-        res.write('data: {"status":"running","operation":"Initializing connection..."}\n\n');
+router.get('/:type/progress', (req, res) => {
+    const { type } = req.params;
+    if (!['update', 'reset'].includes(type)) {
+        return res.status(400).json({ error: 'Invalid operation type' });
     }
 
-    // Add this client to the calculate-metrics set
-    calculateMetricsClients.add(res);
+    res.writeHead(200, {
+        'Content-Type': 'text/event-stream',
+        'Cache-Control': 'no-cache',
+        'Connection': 'keep-alive',
+        'Access-Control-Allow-Origin': req.headers.origin || '*',
+        'Access-Control-Allow-Credentials': 'true'
+    });
 
-    // Remove client when connection closes
+    // Add this client to the correct set
+    const clients = type === 'update' ? fullUpdateClients : fullResetClients;
+    clients.add(res);
+
+    // Send initial connection message
+    sendProgressToClients(new Set([res]), JSON.stringify({
+        status: 'running',
+        operation: 'Initializing connection...'
+    }));
+
+    // Handle client disconnect
     req.on('close', () => {
-        calculateMetricsClients.delete(res);
+        clients.delete(res);
     });
 });
 
@@ -174,7 +210,6 @@ router.get('/status', (req, res) => {
 
 // Add calculate-metrics status endpoint
 router.get('/calculate-metrics/status', (req, res) => {
-    console.log('Calculate metrics status endpoint hit');
     const calculateMetrics = require('../../scripts/calculate-metrics');
     const progress = calculateMetrics.getProgress();
     
@@ -371,49 +406,35 @@ router.post('/import', async (req, res) => {
 
 // Route to cancel active process
 router.post('/cancel', (req, res) => {
-    if (!activeImport) {
-        return res.status(404).json({ error: 'No active process to cancel' });
+    let killed = false;
+
+    // Get the operation type from the request
+    const { type } = req.query;
+    const clients = type === 'update' ? fullUpdateClients : fullResetClients;
+    const activeProcess = type === 'update' ? activeFullUpdate : activeFullReset;
+
+    if (activeProcess) {
+        try {
+            activeProcess.kill('SIGTERM');
+            if (type === 'update') {
+                activeFullUpdate = null;
+            } else {
+                activeFullReset = null;
+            }
+            killed = true;
+            sendProgressToClients(clients, JSON.stringify({
+                status: 'cancelled',
+                operation: 'Operation cancelled'
+            }));
+        } catch (err) {
+            console.error(`Error killing ${type} process:`, err);
+        }
     }
 
-    try {
-        // If it's the prod import module, call its cancel function
-        if (typeof activeImport.cancelImport === 'function') {
-            activeImport.cancelImport();
-        } else {
-            // Otherwise it's a child process
-            activeImport.kill('SIGTERM');
-        }
-        
-        // Get the operation type from the request
-        const { operation } = req.query;
-        
-        // Send cancel message only to the appropriate client set
-        const cancelMessage = { 
-            status: 'cancelled',
-            operation: 'Operation cancelled'
-        };
-
-        switch (operation) {
-            case 'update':
-                sendProgressToClients(updateClients, cancelMessage);
-                break;
-            case 'import':
-                sendProgressToClients(importClients, cancelMessage);
-                break;
-            case 'reset':
-                sendProgressToClients(resetClients, cancelMessage);
-                break;
-            case 'calculate-metrics':
-                sendProgressToClients(calculateMetricsClients, cancelMessage);
-                break;
-        }
-        
+    if (killed) {
         res.json({ success: true });
-    } catch (error) {
-        // Even if there's an error, try to clean up
-        activeImport = null;
-        importProgress = null;
-        res.status(500).json({ error: 'Failed to cancel process' });
+    } else {
+        res.status(404).json({ error: 'No active process to cancel' });
     }
 });
 
@@ -552,20 +573,6 @@ router.post('/reset-metrics', async (req, res) => {
     }
 });
 
-// Add calculate-metrics status endpoint
-router.get('/calculate-metrics/status', (req, res) => {
-    const calculateMetrics = require('../../scripts/calculate-metrics');
-    const progress = calculateMetrics.getProgress();
-    
-    // Only consider it active if both the process is running and we have progress
-    const isActive = !!activeImport && !!progress;
-    
-    res.json({
-        active: isActive,
-        progress: isActive ? progress : null
-    });
-});
-
 // Add calculate-metrics endpoint
 router.post('/calculate-metrics', async (req, res) => {
     if (activeImport) {
@@ -711,4 +718,96 @@ router.post('/import-from-prod', async (req, res) => {
     }
 });
 
+// POST /csv/full-update - Run full update script
+router.post('/full-update', async (req, res) => {
+    try {
+        const scriptPath = path.join(__dirname, '../../scripts/full-update.js');
+        runScript(scriptPath, 'update', fullUpdateClients)
+            .catch(error => {
+                console.error('Update failed:', error);
+            });
+        res.status(202).json({ message: 'Update started' });
+    } catch (error) {
+        res.status(500).json({ error: error.message });
+    }
+});
+
+// POST /csv/full-reset - Run full reset script
+router.post('/full-reset', async (req, res) => {
+    try {
+        const scriptPath = path.join(__dirname, '../../scripts/full-reset.js');
+        runScript(scriptPath, 'reset', fullResetClients)
+            .catch(error => {
+                console.error('Reset failed:', error);
+            });
+        res.status(202).json({ message: 'Reset started' });
+    } catch (error) {
+        res.status(500).json({ error: error.message });
+    }
+});
+
+// GET /history/import - Get recent import history
+router.get('/history/import', async (req, res) => {
+    try {
+        const pool = req.app.locals.pool;
+        const [rows] = await pool.query(`
+            SELECT * FROM import_history 
+            ORDER BY start_time DESC 
+            LIMIT 20
+        `);
+        res.json(rows || []);
+    } catch (error) {
+        console.error('Error fetching import history:', error);
+        res.status(500).json({ error: error.message });
+    }
+});
+
+// GET /history/calculate - Get recent calculation history
+router.get('/history/calculate', async (req, res) => {
+    try {
+        const pool = req.app.locals.pool;
+        const [rows] = await pool.query(`
+            SELECT * FROM calculate_history 
+            ORDER BY start_time DESC 
+            LIMIT 20
+        `);
+        res.json(rows || []);
+    } catch (error) {
+        console.error('Error fetching calculate history:', error);
+        res.status(500).json({ error: error.message });
+    }
+});
+
+// GET /status/modules - Get module calculation status
+router.get('/status/modules', async (req, res) => {
+    try {
+        const pool = req.app.locals.pool;
+        const [rows] = await pool.query(`
+            SELECT module_name, last_calculation_timestamp 
+            FROM calculate_status 
+            ORDER BY module_name
+        `);
+        res.json(rows || []);
+    } catch (error) {
+        console.error('Error fetching module status:', error);
+        res.status(500).json({ error: error.message });
+    }
+});
+
+// GET /status/tables - Get table sync status
+router.get('/status/tables', async (req, res) => {
+    try {
+        const pool = req.app.locals.pool;
+        const [rows] = await pool.query(`
+            SELECT table_name, last_sync_timestamp 
+            FROM sync_status 
+            ORDER BY table_name
+        `);
+        res.json(rows || []);
+    } catch (error) {
+        console.error('Error fetching table status:', error);
+        res.status(500).json({ error: error.message });
+    }
+});
+
 module.exports = router; 

inventory/src/components/settings/PerformanceMetrics.tsx

@@ -133,6 +133,10 @@ export function PerformanceMetrics() {
     }
   };
 
+  function getCategoryName(_cat_id: number): import("react").ReactNode {
+    throw new Error('Function not implemented.');
+  }
+
   return (
     <div className="max-w-[700px] space-y-4">
       {/* Lead Time Thresholds Card */}
@@ -205,11 +209,11 @@ export function PerformanceMetrics() {
             <Table>
               <TableHeader>
                 <TableRow>
-                  <TableHead>Category</TableHead>
-                  <TableHead>Vendor</TableHead>
-                  <TableHead className="text-right">A Threshold</TableHead>
-                  <TableHead className="text-right">B Threshold</TableHead>
-                  <TableHead className="text-right">Period Days</TableHead>
+                  <TableCell>Category</TableCell>
+                  <TableCell>Vendor</TableCell>
+                  <TableCell className="text-right">A Threshold</TableCell>
+                  <TableCell className="text-right">B Threshold</TableCell>
+                  <TableCell className="text-right">Period Days</TableCell>
                 </TableRow>
               </TableHeader>
               <TableBody>
@@ -242,10 +246,10 @@ export function PerformanceMetrics() {
             <Table>
               <TableHeader>
                 <TableRow>
-                  <TableHead>Category</TableHead>
-                  <TableHead>Vendor</TableHead>
-                  <TableHead className="text-right">Period Days</TableHead>
-                  <TableHead className="text-right">Target Rate</TableHead>
+                  <TableCell>Category</TableCell>
+                  <TableCell>Vendor</TableCell>
+                  <TableCell className="text-right">Period Days</TableCell>
+                  <TableCell className="text-right">Target Rate</TableCell>
                 </TableRow>
               </TableHeader>
               <TableBody>

inventory/src/components/settings/StockManagement.tsx

@@ -5,7 +5,6 @@ import { Input } from "@/components/ui/input";
 import { Label } from "@/components/ui/label";
 import { toast } from "sonner";
 import config from '../../config';
-import { Table, TableBody, TableCell, TableHeader, TableRow } from "@/components/ui/table";
 
 interface StockThreshold {
   id: number;
@@ -244,54 +243,6 @@ export function StockManagement() {
           </div>
         </CardContent>
       </Card>
-
-      <Table>
-        <TableHeader>
-          <TableRow>
-            <TableHead>Category</TableHead>
-            <TableHead>Vendor</TableHead>
-            <TableHead className="text-right">Critical Days</TableHead>
-            <TableHead className="text-right">Reorder Days</TableHead>
-            <TableHead className="text-right">Overstock Days</TableHead>
-            <TableHead className="text-right">Low Stock</TableHead>
-            <TableHead className="text-right">Min Reorder</TableHead>
-          </TableRow>
-        </TableHeader>
-        <TableBody>
-          {stockThresholds.map((threshold) => (
-            <TableRow key={`${threshold.cat_id}-${threshold.vendor}`}>
-              <TableCell>{threshold.cat_id ? getCategoryName(threshold.cat_id) : 'Global'}</TableCell>
-              <TableCell>{threshold.vendor || 'All Vendors'}</TableCell>
-              <TableCell className="text-right">{threshold.critical_days}</TableCell>
-              <TableCell className="text-right">{threshold.reorder_days}</TableCell>
-              <TableCell className="text-right">{threshold.overstock_days}</TableCell>
-              <TableCell className="text-right">{threshold.low_stock_threshold}</TableCell>
-              <TableCell className="text-right">{threshold.min_reorder_quantity}</TableCell>
-            </TableRow>
-          ))}
-        </TableBody>
-      </Table>
-
-      <Table>
-        <TableHeader>
-          <TableRow>
-            <TableHead>Category</TableHead>
-            <TableHead>Vendor</TableHead>
-            <TableHead className="text-right">Coverage Days</TableHead>
-            <TableHead className="text-right">Service Level</TableHead>
-          </TableRow>
-        </TableHeader>
-        <TableBody>
-          {safetyStockConfigs.map((config) => (
-            <TableRow key={`${config.cat_id}-${config.vendor}`}>
-              <TableCell>{config.cat_id ? getCategoryName(config.cat_id) : 'Global'}</TableCell>
-              <TableCell>{config.vendor || 'All Vendors'}</TableCell>
-              <TableCell className="text-right">{config.coverage_days}</TableCell>
-              <TableCell className="text-right">{config.service_level}%</TableCell>
-            </TableRow>
-          ))}
-        </TableBody>
-      </Table>
     </div>
   );
 } 

mountremote.command

@@ -1,7 +1,7 @@
 #!/bin/zsh
 
 #Clear previous mount in case it’s still there
-umount ~/Dev/inventory/inventory-server
+umount /Users/matt/Library/Mobile Documents/com~apple~CloudDocs/Dev/inventory/inventory-server
 
 #Mount
-sshfs matt@dashboard.kent.pw:/var/www/html/inventory -p 22122 ~/Dev/inventory/inventory-server/
+sshfs matt@dashboard.kent.pw:/var/www/html/inventory -p 22122 /Users/matt/Library/Mobile Documents/com~apple~CloudDocs/Dev/inventory/inventory-server/